Abstract:In this comprehensive study, we rigorously evaluated the applicability of amorphous indium gallium zinc oxide (a‐IGZO) thin films synthesized using atomic layer deposition (ALD) technology in the field of large‐area organic light‐emitting diode (OLED) TVs. The key term to display production is the distribution of device characteristics, and maintaining uniformity can improve productivity yield and product quality. The purpose of this paper is to present guidelines for early application in industry through the process variable exploration results of ALD deposition equipment. The process parameters studied are process pressure and oxygen partial pressure (PO 2 ). We have secured a method to secure device characteristics suitable for display technology through the correlation between a‐IGZO thin film characteristics and device characteristics through corresponding parameters. Our empirical data strongly demonstrate that the threshold voltage (V th ) stabilizes near 0.0 V and consistently achieves device mobility exceeding 15 cm 2 /Vs. In particular, this study shows that the variability of the Vth characteristic, which is limited to a narrow range of less than ±0.1V, is greatly reduced, and the mobility dispersion is also greatly reduced to less than ±1cm 2 /Vs. A deeper analytical exploration revealed that the pivotal factors affecting device performance are closely related to oxygen vacancies (V o ) and their dynamic interactions with oxygen molecules. These results will improve the uniformity of device characteristics, and it is believed that the introduction of ALD technology into future display technology will demonstrate improvements in the performance and quality of display products.

Novel Processes for IR Drop Reducing on the Application of Large Size AMOLED Display

A Method to Improve IR Drop Issue of Large-Size Top-Emission AMOLED

A New IR-Drop Model That Improves Effectively the Brightness Uniformity of an AMOLED Panel

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Study on low-temperature evaporation of Ag 2 O-based Ag electrode and electron injection layer and their application in OLEDs

P‐19: High Mobility and Reliability Oxide Stacked TFT for Application to Next Generation Display

Improving Flicker of Low-Refresh-Rate Driven Active-Matrix Organic Light-Emitting Diode Display

P-21: Three-Mask Elevated-Metal Metal-Oxide Thin-Film Transistor Technology for High-Resolution AMOLED Application

60‐2: Panel Design Technology for a 31‐inch GOA Drived AMOLED Display with BYYB OLED Structure and Slim Border

Process optimization of preparing CMOS backplane for ultrahigh pixel density red Micro-LED display

A Low Power and IR Drop Compensable AMOLED Pixel Circuit Based on Low-Temperature Poly-Si and Oxide (LTPO) TFTs Hybrid Technology

97‐3: Late‐News Paper: Enhanced IGZO TFT Performance with Atomic Layer Deposition Parameter Optimization for Large OLED Displays

Slot‐Die Coating of All Organic/Polymer Layers for Large‐Area Flexible OLEDs: Improved Device Performance with Interlayer Modification

Solution Processed Organic Light-Emitting Diodes Using the Plasma Cross-Linking Technology

Dewetting‐Assisted Patterning of Organic Semiconductors for Micro‐OLED Arrays with a Pixel Size of 1 Μm

Highly Transparent Red Organic Light-Emitting Diodes with AZO/Ag/AZO Multilayer Electrode

P-36: an Area-Efficient Segmented R-DAC Realized by Low-Voltage Transistors for AMOLED Driver Ics

A Floating High-Voltage Level Shifter Used in A Pre-Charge Circuit for Large-Size Amoled Displays

Efficient deep red and NIR OLEDs based on Ir(III) complexes fabricated by evaporation and solution processing

Systematic strategy for high-performance small molecular hybrid white OLED via blade coating at ambient condition

14-2: Data-Line Driver with Gray-Level-Dependent Far-End Auxiliary Driving for Large AMOLED Display Panel