Abstract:Organic field‐effect transistors (OFETs) based on two‐dimensional (2D) monolayer organic semiconductors (OSC) have demonstrated promising potentials for various applications, such as light emitting diode (LED) display drivers, logic circuits, and wearable electrocardiography (ECG) sensors. To date, the fabrications of this class of highly crystallized 2D organic semiconductors (OSC) are dominated by solution shearing. As these organic active layers are only a few molecular layers thick, their compatibilities with conventional thermal evaporated top electrodes or sophisticated photolithography patterning are very limited, which also restricts their device density. Here, we develop an electrode transfer stamp and a semiconductor patterning stamp to fabricate OFETs with channel lengths down to 3 μm over a large area without using any chemicals or causing any damage to the active layer. Two‐dimensional (2D) 2,9‐didecyldinaphtho[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (C10‐DNTT) monolayer OFETs developed by this new approach shows decent performance properties with a low threshold voltage (VTH) less than 0.5 V, intrinsic mobility higher than 10 cm2 V−1 s−1 and a subthreshold swing (SS) less than 100 mV dec−1. The proposed patterning approach is completely comparable with ultra‐flexible parylene substrate less than 2 μm thick. By further reducing the channel length down to 2 μm and using the monolayer OFET in an AC/DC rectifying circuit, the measured cutoff frequency is up to 17.3 MHz with an input voltage of 4 V. The newly proposed electrode transfer and patterning stamps have addressed the long‐lasting compatibility problem of depositing electrodes onto 2D organic monolayer and the semiconductor patterning. It opens a new path to reduce the fabrication cost and simplify the manufacturing process of high‐density OFETs for more advanced electronic or biomedical applications. This article is protected by copyright. All rights reserved

Dewetting‐Assisted Patterning of Organic Semiconductors for Micro‐OLED Arrays with a Pixel Size of 1 Μm

Sub-micro organic light emitting diode arrays defined by tip-induced resist hollow structures

High-Density Integration of Ultrabright OLEDs on a Miniaturized Needle-Shaped CMOS Backplane

Lithography Compatible, Flexible Micro-Organic Light-Emitting Diodes by Template-Directed Growth

Patterning of organic semiconductor crystal arrays via microchannel-assisted inkjet printing for organic field-effect transistors

High-resolution patterning of organic semiconductor single crystal arrays for high-integration organic field-effect transistors

In situ patterning of microgrooves via inkjet etching for a solution-processed OLED display

Nanomolecular OLED Pixelization Enabling Electroluminescent Metasurfaces

81‐3: One‐to‐One Microlens Array with Pixel for Full‐Color Organic Light‐Emitting Diode Display

Organic Semiconductor Crystal Engineering for High‐Resolution Layer‐Controlled 2D Crystal Arrays

Microscale‐Patterned Graphene Electrodes for Organic Light‐Emitting Devices by a Simple Patterning Strategy

Large-area patterning of full-color quantum dot arrays beyond 1000 pixels per inch by selective electrophoretic deposition

Micropatterning cathode separator for high resolution organic light-emitting diode with negative and positive type photoresists

Scalable Single‐Crystalline Organic 1D Arrays for Image Sensor

Towards Micro-Peled Displays

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping

Solution Processable Small Molecules for Organic Light-Emitting Diodes

Wafer-scale Organic-on-iii-v Monolithic Heterogeneous Integration for Active-Matrix Micro-Led Displays

Capillary‐Bridge Mediated Assembly of Conjugated Polymer Arrays Toward Organic Photodetectors

Organic Electroplated Luminescent Microarrays up to 2800 ppi toward Near‐Eye Displays via Diffusion‐Weakened Boundary Effects

A Magnetic Metal Hard Mask on Silicon Substrate for Direct Patterning Ultra-High-Resolution OLED Displays