Abstract:Small end bearings are a critical component of reciprocating engines, and the performance of their lubrication performance directly affects engines’ reliability and mechanical efficiency. There are many factors that influence their lubrication. A new type of small-end bearing test rig was developed to reveal key influencing factors and their influence on lubrication characteristics, and a multi-body dynamic model coupled with elastohydrodynamic (EHD) characteristics was built. The model was verified through experiments. In accordance with the orthogonal experimental requirements, the impact of various factors on small-end bearing lubrication characteristics was analyzed, and the results showed that: (1) minimal oil film thickness (MOFT), friction power, and maximum oil film pressure (MOFP) are the major evaluation indicators of small-end bearing lubrication, and the most significant influencing factors are the pin bushings’ clearance, engine speed, and bushing surface roughness; (2) increasing the clearance of the pin bushings can increase the hydrodynamic lubrication percentage and the average thickness of the oil film, but it also reduces the local minimum thickness of the oil film; (3) an increase in roughness can improve the MOFT and enhance its carrying capacity, but may also increase friction power; and (4) high speeds can increase the thickness of the oil film between the piston pin and bushing and improve lubrication status, but it also increases friction power on the asperity contact region, reducing mechanical efficiency. The research results can be used for the design of connecting rod small-end bearings to improve their mechanical efficiency and reliability.

Tribo-dynamics Analysis of Engine Small-End Bearing under Real Temperature Boundary Conditions by a Wireless In-Situ Measuring Technology

Temperature evolution prediction of engine big-end bearing by tribo-dynamics modeling and wireless measurement verification

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

A new tribo-dynamics model for engine connecting rod small-end bearing considering elastic deformation and thermal effects

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

A new tribo-dynamics modeling and online measurement method for crosshead bearings in marine engines

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Measurement of Dynamic Stresses and Temperatures of Main Bearing Walls and Caps on an Engine Block

Analysis on Axial Displacements of an Engine Main Shaft in Complex Temperature Environments

Lubrication condition monitoring of journal bearings in diesel engine based on thermoelectricity

Analysis and experimental research of transient temperature rise characteristics of high-speed cylindrical roller bearing

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Lubrication Analysis of Small-End Bearings of Reciprocating Engines Based on Orthogonal Experiment

Method and Experiment of Temperature Collaborative Monitoring Based on Characteristic Points for Tilting Pad Bearings

Simulation and Experimental on Thermal Behavior of Hydrostatic Thrust Bearing Based on Superhydrophobic/oleophobic Surface

Research on tribological condition on-line monitoring system

Thermal Analysis of Tribo-parts under High-speed Sliding-rolling Contact

Design and Analysis of a Self-Lubricating Nuclear Joint Bearing above 320°C

Mixed Thermo-Elasto-hydrodynamic Lubrication and Wear Coupling Simulation Analysis for Dynamical Load Journal Bearings

On the tribo-dynamics of motor rotor system considering lubrication and wear properties of porous bearings

Wireless Monitoring Technology of Rolling Bearing Inner Ring Temperature