Abstract:Layered transition-metal oxides have served as the mainstream cathode materials for high-energy batteries due to their large theoretical capacity (≈280mAh/g),However, the actual usable capacity is much lower than the promised theoretical value. Additional, poor cycling performance and the first-cycle Coulombic efficiency, for which Mn(II)-dissolution, its immobilization in solid electrolyte interface (SEI), oxidation of electrolytes by Ni, and other parasitic process thereat have been held responsible, weight against their applications.. Here we report a significant enhancement of cathode capacity utilization through a novel concept of material design. By embedding Li(Ni0.5Co0.2Mn0.3)O2 in single wall carbon nanotube (CNT) network, a high charge/discharge reversible capacity up to about 250 mAh/g was obtained between 3.0-4.8V. Furthermore, to maintain this high capacity in long-term cycling, we proposes a unique “pre-lithiation process”, which brought the cathode to low potentials before regular cycling and led to an interphase that is normally formed only on anode surfaces. The complete coverage of cathode surface by this ~40 nm-thick interphase effectively prevented Mn(II) dissolution and minimized the side reactions of Ni, Co and Mn at the NMC interface during the subsequent cycling process. More importantly, such “pre-lithiation” process activated a structure containing two Li layers near the surface of NMC532 particles, as verified by XRD and first principle calculation. Hence, a new cathode material of both high capacity with depolarized structure; and excellent cycling performance was generated.

Implanting Transition Metal into Li2O‐Based Cathode Prelithiation Agent for High‐Energy‐Density and Long‐Life Li‐Ion Batteries

Lattice Engineering on Li 2 CO 3 ‐Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li‐Ion Battery Full‐Cell

Lattice Engineering on Li2CO3-Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li-Ion Battery Full-Cell

Unlocking the Decomposition Limitations of the Li2C2O4 for Highly Efficient Cathode Preliathiations

High-capacity battery cathode prelithiation to offset initial lithium loss

Conformal Prelithiation Nanoshell on LiCoO2 Enabling High-Energy Lithium-Ion Batteries.

Overlithiation lithium-rich Mn-based oxide as cathode pre-lithiation agent towards high-energy-density batteries

Mo2C catalyzed low-voltage prelithiation using nano-Li2C2O4 for high-energy lithium-ion batteries

High-Energy-Density and Long-Lifetime Lithium-Ion Battery Enabled by a Stabilized Li2O2 Cathode Prelithiation Additive

Eliminating oxygen releasing of Li-rich layered cathodes by tuning the distribution of superlattice domain

Co-gradient Li-rich cathode relieving the capacity decay in Lithium-ion batteries

Boosting the capability of Li2C2O4 as cathode pre-lithiation additive for lithium-ion batteries

Activated nanolithia as an effective prelithiation additive for lithium-ion batteries

LiF/Fe composite for Ni-rich cathode prelithiation: Synthesis, bilayer structured electrode and lithium loss compensation

Non‐Sacrificial Additive Enables a Non‐Passivating Cathode Interface for 4.6 V Li||LiCoO2 Batteries

A High-Efficient Stable Surface-Prelithiated Li1.2ni0.13co0.13mn0.54o2 Cathode Enabled by Sacrificial Lithium Nitrides for High-Energy-Density Lithium-Ion Batteries

Surface Coating Engineering of Prelithiation Cathode Additives for Lithium-Ion Batteries

Specific Adsorption-Oxidation Strategy in Cathode Inner Helmholtz Plane Enabling 4.6 V Practical Lithium-Ion Full Cells.

Enhanced prelithiation performance of Li 5 FeO 4 cathode additive and optimized solid electrolyte interface enabled by Mn substitution

A Collaboration of Interfacial Engineering and Particle Assembly Enables Highly Stable Li‐Rich Layered Cathodes for Li‐ion Batteries

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance