Abstract:Lithium cobalt oxide (LCO) as a classic layered oxide cathode for lithium-ion batteries is limited by the cutoff voltage, which only delivers about half of the theoretical capacity (∼4.2 V, 140 mA h g–1). Recently, raising the cutoff voltage to 4.6 V has been considered to further improve its specific capacity. However, LCO suffers from serious phase transition of O3 to H1-3, which leads to dramatic volume change and loss of cobalt, finally resulting in rapid capacity decay. In this work, we introduce the NASICON-structured LiZr2(PO4)3 (LZP), an ion conductor for lithium ion, to modify the surface of LCO by a wet-chemical method. Such a surface modification improves lithium-ion diffusion between the interface of LCO and electrolyte and restrains the O3 to H1-3 phase transition. As a result, the optimized LCO with 1 wt % coating (denoted as %) demonstrates enhanced electrochemical performance in both half-cell and full-cell. To be specific, % delivers a high specific capacity of 161.3 mA h g–1 and increases the capacity retention from 37.8 to 75.1% within 100 cycles. Importantly, the full-cell assembled by % and artificial graphite can exhibit an outstanding energy density of 345.5 W h kg–1 (based on the total mass of cathode and anode).The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00533.TEM images; elemental mapping results; charge/discharge curves; CV curves; evolution of interplanar crystal spacing; GITT curves of a single testing step; EIS patterns; XRD and SEM images; cyclic performance of SAG; rate performance; open-circuit voltage of full-cell; and comparison of electrochemical performances with other high-voltage LCO reported in the literature (PDF)This article has not yet been cited by other publications.

Conformal Prelithiation Nanoshell on LiCoO2 Enabling High-Energy Lithium-Ion Batteries.

Enhanced Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material Coated with Li+-conductive Li2SiO3 for Lithium Ion Batteries

Lattice Engineering on Li 2 CO 3 ‐Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li‐Ion Battery Full‐Cell

Practical Prelithiation of 4.5 V LiCoO 2 ||Graphite Batteries by a Passivated Lithium‐Carbon Composite

High-Energy-Density and Long-Lifetime Lithium-Ion Battery Enabled by a Stabilized Li2O2 Cathode Prelithiation Additive

Mo2C catalyzed low-voltage prelithiation using nano-Li2C2O4 for high-energy lithium-ion batteries

Activated nanolithia as an effective prelithiation additive for lithium-ion batteries

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Outside‐In Nanostructure Fabricated on LiCoO2 Surface for High‐Voltage Lithium‐Ion Batteries

Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

In Situ Chemical Synthesis of Lithium Fluoride/Metal Nanocomposite for High Capacity Prelithiation of Cathodes

A High-Efficient Stable Surface-Prelithiated Li1.2ni0.13co0.13mn0.54o2 Cathode Enabled by Sacrificial Lithium Nitrides for High-Energy-Density Lithium-Ion Batteries

Multi-yolk-shell SnO2/Co3Sn2@C Nanocubes with High Initial Coulombic Efficiency and Oxygen Reutilization for Lithium Storage

NASICON-Structured LiZr 2 (PO 4 ) 3 Surface Modification Improves Ionic Conductivity and Structural Stability of LiCoO 2 for a Stable 4.6 V Cathode

High-capacity battery cathode prelithiation to offset initial lithium loss

Facile Synthesis of Core-Shell Structured SiO2@Carbon Composite Nanorods for High-Performance Lithium-Ion Batteries

NaNO2 additive-assisted Li2O2 decomposition for highly efficient cathode prelithiation of lithium-ion batteries

Core–Shell CoSn@CoSnOx Nanoparticles Encapsulated in Hollow Carbon Nanocubes As Anodes for Lithium‐Ion Batteries

Synchronous constructing ion channels and confined space of Co3O4 anode for high-performance lithium-ion batteries

Confining Ultrafine Li3P Nanoclusters in Porous Carbon for High-Performance Lithium-Ion Battery Anode

Synthesis of Spherical Carbon‐Coated CoP Nanoparticles for High‐Performance Lithium‐Ion Batteries