Abstract:This paper details the design and fabrication process of a fully integrated soft humanoid robotic hand with five finger that integrate an embedded shape memory alloy (SMA) actuator and a piezoelectric transducer (PZT) flexure sensor. Several challenges including precise control of the SMA actuator, improving power efficiency, and reducing actuation current and response time have been addressed. First, a Ni-Ti SMA strip is pretrained to a circular shape. Second, it is wrapped with a Ni-Cr resistance wire that is coated with thermally conductive and electrically isolating material. This design significantly reduces actuation current, improves circuit efficiency, and hence reduces response time and increases power efficiency. Third, an antagonistic SMA strip is used to improve the shape recovery rate. Fourth, the SMA actuator, the recovery SMA strip, and a flexure sensor are inserted into a 3D printed mold which is filled with silicon rubber materials. The flexure sensor feeds back the finger shape for precise control. Fifth, a demolding process yields a fully integrated multifunctional soft robotic finger. We also fabricated a hand assembled with five fingers and a palm. We measured its performance and specifications with experiments. We demonstrated its capability of grasping various kinds of regular or irregular objects. The soft robotic hand is very robust and has a large compliance, which makes it ideal for use in an unstructured environment. It is inherently safe to human operators as it can withstand large impacts and unintended contacts without causing any injury to human operators or damage to the environment.

A Fabric-Based Flexible Actuator for Thumb Joints of Soft Anthropomorphic Hands

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

3D Printed, Modularized Rigid-Flexible Integrated Soft Finger Actuators for Anthropomorphic Hands

Designing Soft Pneumatic Actuators for Thumb Movements

CATCH-919 Hand: Design of a 9-actuator 19-DOF Anthropomorphic Robotic Hand

Design and Fabrication of a Variable Stiffness Soft Pneumatic Humanoid Finger Actuator

Design, Modeling, and Evaluation of Fabric-Based Pneumatic Actuators for Soft Wearable Assistive Gloves

Design of Humanoid Robotic Hand Based on Link Underactuation

An Anthropomorphic Robotic Hand with a Soft-Rigid Hybrid Structure and Positive- Negative Pneumatic Actuation

Design Principle of a Dual-Actuated Robotic Hand With Anthropomorphic Self-Adaptive Grasping and Dexterous Manipulation Abilities

Five-fingered Hand with Wide Range of Thumb Using Combination of Machined Springs and Variable Stiffness Joints

An Anthropomorphic Design Guideline for the Thumb of the Dexterous Hand

A Flexible Self-Adaptive Underactuated Hand With Series Passive Joints

Blue Hand: A Novel Type of Soft Anthropomorphic Hand Based on Pneumatic Series-Parallel Mechanism

All-Fabric Bi-directional Actuators for Multi-joint Assistance of Upper Limb

Design of the Human-like Dexterous Hand Actuated by Pneumatic Muscle Actuators

A Dual-Mode Actuator for Soft Robotic Hand

Finger Flexion and Extension Driven by a Single Motor in Robotic Glove Design

Finger joint aligned flat tube folding structure for robotic glove design

A Novel Underactuated Robotic Finger with Variable Stiffness Joints

Design and Fabrication of a Soft Robotic Hand with Embedded Actuators and Sensors