Abstract:Iron powder can be a sustainable alternative to fossil fuels in power supply due to its high energy density and abundance. Iron powder releases energy through exothermic oxidation (combustion), and stores back energy through its subsequent hydrogen-based reduction, establishing a circular loop for renewable energy supply. Hydrogen-based direct reduction is also gaining global momentum as possible future backbone technology for sustainable iron and steel production, with the aim to replace blast furnaces. Here, we investigate the microstructural formation mechanisms and reduction kinetics behind hydrogen-based direct reduction of combusted iron powder at moderate temperatures (400-500°C) using thermogravimetry, ex-situ X-ray diffraction, scanning electron microscopy coupled with energy dispersive spectroscopy and electron backscatter diffraction, as well as in-situ high-energy X-ray diffraction. The influence of pre-oxidation treatment was studied by reducing both as-combusted iron powder (50% magnetite and 50% hematite) and the same powder after pre-oxidation (100% hematite). A gas diffusion-limited reaction was obtained during the in-situ high-energy X-ray diffraction experiment, with successive hematite and magnetite reduction, and a strong increase in reduction kinetics with initial hematite content. Faster reduction kinetics were obtained during the thermogravimetry experiment, with simultaneous hematite and magnetite reduction. In this case, the reduction reaction was limited by a mix of phase boundary and nucleation and growth models, as analyzed by multi-step model fitting methods as well as by microstructural investigation. When not limited by gas diffusion, the pre-oxidation treatment showed almost no influence on the reduction time but a strong effect on the final microstructure of the reduced powder.

Influence of Hydrogen Flow Rate on Multistep Kinetics of Hematite Reduction

Multistep Kinetic Study of Magnetite Reduction by Hydrogen Based on Thermogravimetric Analysis

Kinetic analysis of iron ore powder reaction with hydrogen—carbon monoxide

Kinetics and microstructural changes during fluidized reduction of magnetite with hydrogen at low temperatures

Kinetics analysis of direct reduction of iron ore by hydrogen in fluidized bed based on response surface methodology

Studies on the Reduction Behavior of Iron Oxide Pellet Fines with Hydrogen Gas: Mechanism and Kinetic Analysis

Kinetic Analysis of Isothermal and Non-Isothermal Reduction of Iron Ore Fines in Hydrogen Atmosphere

A Laboratory Study of the Reduction of Iron Oxides by Hydrogen

A Review on the Kinetics of Iron Ore Reduction by Hydrogen

Parametric study on hematite pellet direct reduction by hydrogen

Reduction kinetics of iron oxide pellets with H2 and CO mixtures

Parameter Optimization for Hydrogen-Induced Fluidized Bed Reduction of Magnetite Iron Ore Fines

Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C

Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets

Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperature

Kinetic Analysis of Molten Oxide Reduction Using Bottom-Blown Hydrogen Injection

Kinetic Analysis of the Iron Oxide Reduction Using Hydrogen-Carbon Monoxide Mixtures as Reducing Agent

Hydrogen-based direct reduction of combusted iron powder: deep pre-oxidation, reduction kinetics and microstructural analysis

Influence of a Prior Oxidation on the Reduction Behavior of Magnetite Iron Ore Ultra-Fines Using Hydrogen

Reduction Kinetics of Fine Hematite Ore Particles with a High Temperature Drop Tube Furnace

Effect of Hydrogen-Rich Atmosphere on the Reduction Behavior and Kinetics of Iron-Ore Pellets Under Non-isothermal Conditions