Abstract:Rectangular explosive charges are usually used in military or civilian explosive transportation and storage. The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blasts lack comprehensive investigation, which is significant for the design of blast-resistant structures. In this paper, the side-length ratio of the rectangle, orientation, and detonation position of the charge are chosen as controlling parameters to investigate their influence on blast loads in the scaled distances of the gauges ranging from 0.63 to 10.54 m/kg 1/3 with well validated 3D numerical simulations. The results show that there is a large difference in the near-field spatial distribution of the blast load of the rectangular charge; if the blast load of the rectangular charge is simply evaluated with the spherical charge, the maximum peak overpressure (maximum impulse) will be underestimated by a factor of 7.46 (4.84). This must be taken seriously by blast-resistant structure designers. With the increase in the scaled distance, when the critical scaled distance is greater than 6.32 (7.38) m/kg 1/3 , the influence of the charge shape on the maximum peak overpressure (maximum impulse) of the spatial blast load can be ignored. In general, the impact of detonation of the charge at the end on the maximum peak overpressure is greater compared with central detonation, but for the impact of the maximum impulse, it is necessary to pay attention to the side-length ratio of the rectangular charge and the specific detonation position on the end face. Furthermore, the structural response of steel plates placed at different azimuths under the blast load of a rectangular charge is preliminarily analyzed, and the results show that the deformation and energy of the plates are consistent with the distribution of the blast load. These analysis results provide a reference for the explosion protection design in near-field air explosions.

Dispersion Properties of Fragments of Square Metal Shells Driven by Explosive Loading

Experimental study on fragments dispersion characteristics of elliptical cross-section casing under explosive loading

Study on Axial Dispersion Characteristics of Double-Layer Prefabricated Fragments

Investigation of the Fracture and Fragmentation of Implosively Driven Thin-Walled Cylindrical Shell: From Thermodynamic Analysis to CDEM Simulation

Axial Distribution of Fragments from the Dynamic Explosion Fragmentation of Metal Shells

Calculation Model of the Axial Dispersion Distribution of Cylindrical-Warhead Fragments

Experiment and instantaneous driving simulation of explosion dispersion process of central tube for submunition

Research on the Volume and Line Fractal Dimension of Fragments from the Dynamic Explosion Fragmentation of Metal Shells

Effect Of Warhead Shell Thickness On Fragments' Formation And Penetration Performance

Measurement of Dynamic Fracture Parameters of Explosive Cylindrical Shells

Test to Determine the Response Level of Heterogeneous Explosive by Fragment Shock Initiation

Experimental Studies of Explosion Energy Output with Different Igniter Mass

Expansion And Fracture Of Fragmenting Warhead Shells Of Various Materials Under A Cl-20 Explosive Charge

Explosion Temperature and Dispersion Characteristics of Composite Charges Based on Different Non-detonative Materials

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

Study on the effect of shape parameters and initiation points of rectangular high explosive on the spatial distribution of blast loads

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

Initiation of Shielded High Explosive Impacted by Energetic Fragment

The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading

Double blast loadings of clamped square steel plates

Dispersal Characteristics Dependence on Mass Ratio for Explosively Driven Dry Powder Particle