Abstract:A numerical model describing the ballistic behavior of a commercially used initiator is presented in this article. This model was built on the principle of conservation of mass and energy in the multi-phase framework incorporated with multi-loaded conditions. After obtaining the information about the grain size distribution in each composite, a fixing factor was proposed based on the surface area ratio of the composites. Thus, the solid propellant burning process based on distributed grain size was described, and the burn rate parameters of the applied pyrotechnic compositions were re-evaluated for different preconditioned temperature levels according to Vieille’s law. The influence of bridge wire and initiator metal cap was further modeled concerning their characteristic properties according to the observed measurements. The validation of the entire initiator model in the closed bomb test showed quantitative agreement with the measured pressure evolution, while the parameter study for evaluating the ballistic sensitivity of each component delivered some insights into the product development process. Furthermore, the configuration of a cold gas inflator was utilized to evaluate the initiator impact for a realistic application, where the shock wave intensity during deployment serves the main function in the inflator design. Incorporated with CFD simulations to capture the shock wave propagation, 0D-3D coupling strategy for initiator ballistics to inflator configuration was realized. Besides, the simulation results reflected the physical conditions in a proper manner. In particular, the parameter study led to a better understanding of interactions between inflator components, which were barely possible to be quantified through the measurements. The proposed initiator model could also be used in combination with other mechanical principles as a component of pyrotechnic devices such as pin-puller, electric line cutters, or airbag inflators. The detailed information gained in describing the physical properties enabled us to assess the existing design quantitatively and to have better control of the product quality.

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

Blast wave characteristics of multi-layer composite charge: Theoretical analysis, numerical simulation, and experimental validation

Numerical Simulation of the Blast Wave of a Multilayer Composite Charge

Experimental Investigation on the Enhancing Effect of Reactive Materials on Explosion Fireballs and Shock Waves of Composite Charges

Numerical Investigation On Characteristics Of The Shock Wave Generated By An Annular Nested Charge

Explosion Temperature and Dispersion Characteristics of Composite Charges Based on Different Non-detonative Materials

Study on Axial Dispersion Characteristics of Double-Layer Prefabricated Fragments

Experiment and instantaneous driving simulation of explosion dispersion process of central tube for submunition

Analysis of the Overpressure Fields in a Shock Tube with Multi-Point Initiation

Test to Determine the Response Level of Heterogeneous Explosive by Fragment Shock Initiation

Shock Initiation of Covered Flake JH‐2 High Explosive by Simultaneous Impact of Multiple Fragments

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Experimental Studies of Explosion Energy Output with Different Igniter Mass

Design of Multi-point Synchronous Initiation Circuit for Shaped Charge

Preliminary experimental study on the mechanisms of explosion-electric coupling

Prediction of Peak Overpressure of Charge Enveloped by Polymer Matrix Composite: Theoretical Modeling and Experimental Verification

Numerical Investigation of Pyrotechnical Initiators and Their Impact in Airbag Inflator Applications: Ballistic Modeling and Functional Analysis

Study on the characteristics of blast loads due to two simultaneous detonated charges in real air

Auto-Ignition Behaviors of the Composite Modified Double Base Propellants

Experimental Study on Single Ignition of Mixed Ternary Fuel

Initiation and energy release characteristics studies on polymer bonded explosive materials under high speed impact