Abstract:Yttrium-stabilized zirconia (YSZ) materials are routinely used as thermal barrier coatings (TBCs). The phase composition and microstructure of YSZ materials significantly influence their properties. In this study, ZrO2 ceramics composed respectively of monoclinic ZrO2 (m-ZrO2), tetragonal YSZ (t-YSZ) and cubic YSZ (c-YSZ) phases were sintered. The effect mechanism of phase composition and microstructure on thermophysical and mechanical properties were investigated by experiment together and numerical calculation. The result indicates that YSZ materials with c-YSZ phase are more suitable as TBC materials in terms of heat insulation, thermal expansion match with the metal substrate, and strain tolerance. The YSZ ceramic with c-YSZ phase also exhibits lower thermal conductivity than those composed of the t-YSZ and m-ZrO2 phases due to its greater lattice distortion, number of oxygen vacancies, and lower sound velocity as a result of greater Y2O3 doping. Bond lengths and cohesive energy calculations based on first principles reveal that the reason that the Y2O3 doping causes the CTE values of ZrO2 to increase is due to the bonding between ions becoming weaker, and the c-YSZ phase exhibits the highest CTE value. First-principles calculations also indicate that the c-YSZ phase exhibits a lower elastic modulus and better malleability and plasticity than m-ZrO2 and t-YSZ phases. However, the t-YSZ phase has better fracture toughness due to toughening under stress and finer grains.

Mechanical and Thermal Properties of Densified ZrCx (x=0.5, 0.7 and 1.0) Ceramics

Densification, Mechanical and Thermal Properties of ZrC1− Ceramics Fabricated by Two-Step Reactive Hot Pressing of ZrC and ZrH2 Powders

Densification, Microstructures, and Mechanical Properties of (zr, Ti)(C, N) Ceramics Fabricated by Spark Plasma Sintering

Synthesis and Characterization of ZrCx Coatings with Different Stoichiometry

Synthesis, Mechanical and Physical Properties of Bulk Zr2Al4C5 Ceramic

Preparation and Thermophysical Properties of NdxZr1−xO2−x/2 (x=0.1, 0.2, 0.3, 0.4, 0.5) Ceramics

Mechanical and Thermal Expansion Studies on Ca0.5Sr0.5Zr4-xTixP6O24 Ceramics

Thermal Expansion and Thermal Conductivity of SmxZr1−xO2−x/2 (0.1 ≤ X ≤ 0.5) Ceramics

Structure and microwave dielectric properties of CaZr0.99−x(Zn1/3Nb2/3)xTi0.01O3 (0 ≤ x ≤ 0.2) microwave dielectric ceramics

Effect of carbon content on the microstructure and mechanical properties of high-entropy (Ti0.2Zr0.2Nb0.2Ta0.2Mo0.2)Cx ceramics

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering

Thermophysical and mechanical properties of cubic, tetragonal and monoclinic ZrO2

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

Densification, Structure, and Thermophysical Properties of Ytterbium–Gadolinium Zirconate Ceramics

Pressureless Sintering of ZrC-based Ceramics by Enhancing Powder Sinterability

Mechanical Properties of ZrO<sub>2</sub>–LaMgAl<sub>11</sub>O<sub>19</sub> Ceramics

Enhanced Energy Storage Density and Its Variation Tendency in CaZrxTi1−xO3 Ceramics

Microstructural evolution, mechanical and thermal properties of TiC-ZrC-Cr3C2 composites

Densification, Microstructure and Mechanical Properties of Multicomponent (tizrhfnbtamo)c Ceramic Prepared by Pressureless Sintering

Microstructure and Mechanical Properties of (tizrnbtamo)c High-Entropy Ceramic

Enhanced Mechanical and Thermal Expansion Properties of ZrP2O7-added Ca0.5Sr0.5Zr4P6O24 Ceramics