Abstract:The excellent shape memory properties of NiTiFe alloys make them a popular choice for tube connection components and actuators in the aerospace industry. However, in order to obtain these properties, the alloy must undergo pre-deformation at specific cryogenic temperatures to induce the martensitic phase transformation. Despite their widespread use, the deformation behavior and shape memory mechanism of NiTiFe alloys at cryogenic temperatures remain unclear. To address this, we conducted a study investigating the deformation behavior and shape memory mechanism of Ni 47 Ti 50 Fe 3 alloy at temperatures ranging from −190 °C to 150 °C using tensile tests, free recovery tests, and EBSD analysis. Our findings suggest that the deformation behavior of NiTiFe alloy can be classified into four classes corresponding to different deformation mechanisms. At temperatures above the M d (−15 to −30 °C), dislocation slip and {114} B2 deformation twinning occur without reversible strain. However, reversible and irreversible strains occur simultaneously at temperatures between −50 to −90 °C. At temperatures ranging from −110 to −150 °C, the reorientation/detwinning of the R-phase, stress-induced martensitic phase transformation, and yield stage of martensite occur in sequence. When the deformation temperature is within the range of −165–190 °C, the reorientation/detwinning of martensite occurs during the stress platform stage, and irreversible strain occurs during the yield stage of martensite. The best shape memory effect of the NiTiFe alloy is observed at deformation temperatures near M f (−180 °C). Moreover, the reverse phase transformation temperatures increase with the increasing deformation amounts, even without plastic deformation. The temperature-dependent deformation map of NiTiFe alloy was obtained based on the tests conducted in this study, from which the influence of deformation temperatures on the different critical stresses and the deformation mechanism under different temperature conditions can be determined.

Cryogenic Rolling Induces Quasi-Linear Superelasticity with High Strength over a Wide Temperature Range in TiNi Shape Memory Alloys

Strain states and unique properties in cold-rolled TiNi shape memory alloys

High temperature superelasticity realized in equiatomic Ti-Ni conventional shape memory alloy by severe cold rolling

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Transformation Behaviors and Superelasticity of Ti 50 Ni 48 Fe 2 Shape Memory Alloy Subjected to Cold-Rolling and Subsequent Annealing

Cryogenic temperature deformation behavior and shape memory mechanism of NiTiFe alloy

Work Hardening Behavior and Microstructure Evolution of a Cu-Ti-Cr-Mg Alloy during Room Temperature and Cryogenic Rolling

Mechanical property enhancement and microstructure evolution of an Al-Cu-Li alloy via rolling at different temperatures

Achieving Large Near-Linear Elasticity, Low Modulus, and High Strength in a Metastable Β-Ti Alloy by Mild Cold Rolling

Cryogenic superelasticity and elastocaloric effect in a nanostructured Ti-Ni-Co alloy

Comparative study on mechanical and shape memory properties of hot forged NiTiNb in axial and radial direction

Effect of Annealing Temperature on Shape Memory Effect of Cold-Rolled Ti-16 At.%nb Alloy

Simultaneous improvement in strength and ductility of CT20 titanium alloy at cryogenic temperature

Recent Development of TiNi‐Based Shape Memory Alloys with High Cycle Stability and High Transformation Temperature

Inverse Gradient Nanostructure Through Gradient Cold Rolling Demonstrated with Superelasticity Improvement in Ti-50.3Ni Shape Memory Alloy

Superelastic Properties of Aged FeNiCoAlTaB Cold-Rolled Shape Memory Alloys

Improved Stability of Superelasticity and Elastocaloric Effect in Ti-Ni Alloys by Suppressing Lüders-like Deformation under Tensile Load

Martensitic Transformation and Shape Memory Effect of Ti-Ni Based High Temperature Shape Memory Alloys

Meso-scopically Homogeneous Superelastic Transformation and Related Elastocaloric Effect in a Textured Ti-based Shape Memory Alloy

Achieving High Strength and Tensile Ductility in Pure Nickel by Cryorolling with Subsequent Low-Temperature Short-Time Annealing

Low-energy irradiation induced giant quasilinear superelasticity over wide temperature range in NiTi shape memory alloys