Abstract:A thorough understanding of the reactor core thermal hydraulic behavior is essential for the design and safety analysis of Sodium-cooled Fast Reactors (SFR). Due to the application of hexagonal subassembly, the core thermal hydraulic behavior is significantly affected by the flow field within the subassemblies, the inter-wrapper region and the hot pool. Analysis of the core thermal hydraulic behavior requires a model coupling the three regions mentioned above, which has been identified as one of the thermal hydraulic challenges in SFR. In the present study, a 3D model that covers the three regions was developed for the core of the China Experimental Fast Reactor (CEFR) with the Computational Fluid Dynamic (CFD) code, Fluent. The inter-wrapper region and the hot pool were modeled in detail, while the subassemblies were modeled with a special porous medium model. The core thermal hydraulics behavior under steady state was studied, more specifically, information for the flow field distribution at the core outlet, the inter-wrapper flow and the duct wall temperature distribution was obtained. Under steady state, liquid sodium in the inter-wrapper region is supplied by the inner region of the hot pool. And it enters the inter-wrapper region from the core outer region and returns back to the hot pool inner region from the core central region. The inter-wrapper flow is cooled by non-fuel subassemblies and heated up by fuel subassemblies. For non-fuel subassembly, the ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies could reaches 96%; for fuel subassemblies, the maximum ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies is 2.45%. Significant temperature gradients have been observed on the duct wall, with maximum values of 156.69 K/m in the vertical direction and 2,196.00 K/m in the circumferential direction. The largest temperature gradient appears on the duct of subassemblies adjacent to the transition region of fuel subassemblies and non-fuel subassemblies.

Neutronics and Thermal-Hydraulics Coupling Analysis of Integral Inherently Safe Fluoride-Salt-Cooled High-Temperature Advanced Reactor - Fustar

Study on the safety characteristics of fluoride-salt-cooled high-temperature advanced reactor

Fluoride-Salt-cooled high-Temperature Advanced Reactor (FuSTAR): An integrated nuclear-based energy production and conversion system

Development of the FHR Advanced Natural Circulation Analysis Code and Application to FHR Safety Analysis

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Study on tritium transport characteristics in fluoride-salt-cooled high-temperature advanced reactor

Computational Fluid Dynamics Analysis of a Fluoride Salt–Cooled Pebble-Bed Test Reactor

Coupled Monte Carlo and Thermal-Hydraulics Modeling for the Three-Dimensional Steady-State Analysis of the Xi'an Pulsed Reactor

Neutronics and thermal-hydraulics coupling analysis using the FLUENT code and the RELAP5-3D code for a molten salt fast reactor

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

Development and Application of Multi-Physics Safety Analysis Code for Advanced Liquid Metal Cooled Reactor

Neutronics and Thermal-Hydraulics Coupling Analysis in Accelerator-Driven Subcritical System

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Review, numerical validation, and experiment verification for Definite solution Analogy Theory (DSAT) in thermal-hydraulic scaling

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Design and Evaluation of Mitigation Measures for Tsinghua High Flux Reactor Loss-of-Coolant Accidents

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Numerical Study and Assessment of a Novel Combined Passive Cooling System for Tank-in-pool Reactors

The Design and CFD Simulation of a New Spent Fuel Pool Passive Cooling System