Abstract:The human wrist, a complex articulation of skeletal muscles and two-carpal rows, substantially contributes to improvements in maneuverability by agilely performing three-degree-of-freedom (3-DOF) orienting tasks and regulating stiffness according to variations in interaction forces. However, few soft robotic wrists simultaneously demonstrate dexterous 3-DOF motion and variable stiffness; in addition, they do not fully consider a soft-rigid hybrid structure of integrated muscles and two carpal rows. In this study, we developed a soft-rigid hybrid structure to design a biomimetic soft robotic wrist (BSRW) that is capable of rotating in the x and y directions, twisting around the z -axis, and possessing stiffness-tunable capacity. To actuate the BSRW, a lightweight soft-ring-reinforced bellows-type pneumatic actuator (SRBPA) with large axial, linear deformation ( η lcmax =70.6%, η lemax =54.3%) and small radial expansion ( η demax =3.7%) is designed to mimic the motion of skeletal muscles. To represent the function of two-carpal rows, a compact particle-jamming joint (PJJ) that combines particles with a membrane-covered ball-socket mechanism is developed to achieve various 3-DOF motions and high axial load-carrying capacity (>60 N). By varying the jamming pressure, the stiffness of the PJJ can be adjusted. Finally, a centrally positioned PJJ and six independently actuated SRBPAs, which are in an inclined and antagonistic arrangement, are sandwiched between two rigid plates to form a flexible, stable, and compact BSRW. Such a structure enables the BSRW to have a dexterous 3-DOF motion, high load-carrying ability, and stiffness tunability. Experimental analysis verify 3-DOF motion of BSRW, producing force of 29.6 N and 36 N and torque of 2.2 Nm in corresponding rotations. Moreover, the range of rotational angle and stiffness-tuning properties of BSRW are studied by applying jamming pressure to the PJJ. Finally, a system combining a BSRW and a soft enclosing gripper is proposed to demonstrate outstanding manipulation capability in potential applications.

Dynamics Modeling of a New Type of Magnetically Driven Spherical Wrist

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

A Novel 3-DOF Spherical Hybrid Mechanism for Wrist Movement: Design, Kinematics, and Simulation

[Design and Control Analysis of 2-DOF Spherical Wrist].

Design and Kinematics Analysis of the Continuous 3R Oblique Axis Non-Spherical Wrist

Design and Analysis of Variable Flexible Actuator for Human-Robot Interaction

A Wrist-Inspired Magneto-Pneumatic Hybrid-Driven Soft Actuator with Bidirectional Torsion

New method and application of inverse kinematic solution for spherical wrist rehabilitation mechanism

Two Degree of Freedom Spherical Ultrasonic Motor With Three Traveling-wave Stators

Modeling And Controller Design Of A Novel Large-Gap Magnetic Suspension And Balance System For 3d Non-Contact Manipulation

Modeling and Control of a Novel Variable Stiffness Three DoFs Wrist

Kinematics and Dynamics of an Asymmetrical Parallel Robotic Wrist

Design and Modeling of a 2-DOF Cable-Driven Parallel Wrist Mechanism.

Kinematic and Dynamic Analysis of the 2-DOF Spherical Wrist of Orthoglide 5-axis

A Novel Two-Degree-of-freedom Spherical Ultrasonic Motor Using Three Travelling-Wave Type Annular Stators

Design and Kinematic Modeling of a Pneumatic Soft Bellow-Type Wrist

Model and Property Analysis for a Ball-Hinged Three-Degree-of-Freedom Piezoelectric Spherical Motor

A Rigid-Soft Pneumatic Wrist with Fixed Rotation Axes and Active Jamming Variable Stiffness Mechanisms.

Biomimetic soft robotic wrist with 3-DOF motion and stiffness tunability based on ring-reinforced pneumatic actuators and a particle jamming joint

Spherical Joint Actuator with Backstepping Sliding Mode Control for Robotic Manipulator Rigid-Flexible Coupling System

Design and Optimization of the Magnetic Field-Driven Spherical Gripper with Adjustable Stiffness