Statics Analysis of 3 DOF Spherical Traveling Wave Ultrasonic Motor Based on a Spiral Form of Spring

FU Ping,HU Xi-xing,GUO Ji-feng

DOI: https://doi.org/10.7631/issn.1000-2243.2014.02.0250

2014-01-01

Abstract:Three degree- of- freedom spherical traveling wave ultrasonic motor is a kind of multi degree- of- freedom motor. A novel type of traveling wave three degree- of- freedom spherical ultrasonic motor based on a spiral form of the spring was developed in this paper. In order to get its motion rule, statics analysis of the motor was to be discussed. The key issue of the self- regulation between the stators and the spherical rotor are solved by making use of the special- made spring. The preload between the stators and the spherical rotor is more smooth. The driving principle and basic structure of this kind of ultrasonic motor were introduced and the coordinate transformation model and position relation of rotor and stators of spherical ultrasonic motor were also set up. Then stress of rotor and contact force of rotor and stators on the contact circle were also analyzed. Through the force balance equation of its stator and rotor,relation of micro displacement of the center of rotor and axial compaction and preload force of stators were presented in this paper. Also the basic relation of this kind of spherical motor were given out. Through simulation,the mechanical characteristics of this type of motor is got. This article lays a theoretical foundation for control strategy of the motor. The diameter of prototype motor is 40 mm in rotor and 30 mm in stator and maximum holding torque is 0. 09 N·m,maximum speed is 90 r·min- 1. From the above discussion and practical experiments availability of devices is to be verified.