Abstract:The human wrist, a complex articulation of skeletal muscles and two-carpal rows, substantially contributes to improvements in maneuverability by agilely performing three-degree-of-freedom (3-DOF) orienting tasks and regulating stiffness according to variations in interaction forces. However, few soft robotic wrists simultaneously demonstrate dexterous 3-DOF motion and variable stiffness; in addition, they do not fully consider a soft-rigid hybrid structure of integrated muscles and two carpal rows. In this study, we developed a soft-rigid hybrid structure to design a biomimetic soft robotic wrist (BSRW) that is capable of rotating in the x and y directions, twisting around the z -axis, and possessing stiffness-tunable capacity. To actuate the BSRW, a lightweight soft-ring-reinforced bellows-type pneumatic actuator (SRBPA) with large axial, linear deformation ( η lcmax =70.6%, η lemax =54.3%) and small radial expansion ( η demax =3.7%) is designed to mimic the motion of skeletal muscles. To represent the function of two-carpal rows, a compact particle-jamming joint (PJJ) that combines particles with a membrane-covered ball-socket mechanism is developed to achieve various 3-DOF motions and high axial load-carrying capacity (>60 N). By varying the jamming pressure, the stiffness of the PJJ can be adjusted. Finally, a centrally positioned PJJ and six independently actuated SRBPAs, which are in an inclined and antagonistic arrangement, are sandwiched between two rigid plates to form a flexible, stable, and compact BSRW. Such a structure enables the BSRW to have a dexterous 3-DOF motion, high load-carrying ability, and stiffness tunability. Experimental analysis verify 3-DOF motion of BSRW, producing force of 29.6 N and 36 N and torque of 2.2 Nm in corresponding rotations. Moreover, the range of rotational angle and stiffness-tuning properties of BSRW are studied by applying jamming pressure to the PJJ. Finally, a system combining a BSRW and a soft enclosing gripper is proposed to demonstrate outstanding manipulation capability in potential applications.

Mechanism Design of Wrist Joint for an Articulated Manipulator.

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Object Variation Oriented Kinematics Optimization Design for Manipulator

Design and development of a 3-DoF robotic wrist joint with tension amplification mechanism

Quaternion Joint: Dexterous 3-DOF Joint Representing Quaternion Motion for High-Speed Safe Interaction

Kinematic and Dynamic Analysis of the 2-DOF Spherical Wrist of Orthoglide 5-axis

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

Development of an Anthropomorphic Prosthetic Hand with Underactuated Mechanism

Mechanism Design of A Simplified 6-Dof 6-Rus Parallel Manipulator

A Six Degree-Of-Freedom Haptic Device Based On The Orthoglide And A Hybrid Agile Eye

KULEX-Wrist: Design and Analysis of Linkage-Driven Exoskeleton for Wrist Assistance

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Modeling and Control of a Novel Variable Stiffness Three DoFs Wrist

A Configurable Architecture for Two Degree-of-Freedom Variable Stiffness Actuators to Match the Compliant Behavior of Human Joints

Kinematic design and analysis of a 6-DOF spatial five-Bar linkage

Design and Kinematic Optimization of a Two Degrees-of-Freedom Planar Remote Center of Motion Mechanism for Minimally Invasive Surgery Manipulators

Biomimetic soft robotic wrist with 3-DOF motion and stiffness tunability based on ring-reinforced pneumatic actuators and a particle jamming joint

Type Synthesis of a Fully Decoupled Parallel Wrist Manipulator

On the Design of a Full-Actuated Robot Hand with Target Sensing Self-adaption and Slider Crank Mechanism.

A Closed-Form Inverse Kinematic Analytical Method for Seven-DOF Space Manipulator with Aspheric Wrist Structure