Difunctionalization Applied to Polymerization

Dahui Zhao,L.Y.C. Meng

DOI: https://doi.org/10.1055/s-0042-1752007

2023-01-01

Synfacts

Abstract:Key words alkene difunctionalization - nickel catalysis - poly[arylene-α-(aryl)ethylene]s

What problem does this paper attempt to address?

Nickel(II) Α -Diimine Catalysts with Carboxyl Groups for Ethylene Oligomerization and Polymerization

Bing Liu,Meng-zhe Fang,Su-yun Jie,Zhi-yang Bu,Bo-Geng Li

DOI: https://doi.org/10.1007/s10118-016-1734-3

2016-01-01

Chinese Journal of Polymer Science

Abstract:A series of nickel(II) α-diimine complexes with strong electron-withdrawing carboxyl groups, having reactive hydrogen atoms, were prepared and used as precatalysts for ethylene oligomerization and/or polymerization. The influence of metal halides and ligand structure on the catalytic activity and properties of products was investigated. The results showed that nickel bromide was much more active than nickel chloride, and the substituents at the ortho-position of aryl ring had large influence on the properties of products. Therefore, the products ranging from liquid oligomers to polymers could be readily obtained by the variation of the substituents on the ligands and reaction conditions.
ETHYLENE POLYMERIZATIONS CATALYZED BY Α-Diimine COMPLEXES WITH DIFFERENT SUBSTITUENTS ON LIGAND BACKBONE

Guo Chunwen,Fan Hong,Wang Wenjun,Li Bogeng

DOI: https://doi.org/10.3724/sp.j.1105.2009.00823

2009-01-01

Acta Polymerica Sinica

Abstract:Four alpha-diimine nickel complexes Ar-N=C(R-1) C(R-2)=N-ArNiBr2 with different alkyl substituents on backbone of ligand [Ar = 2, 6-dimethylphenyl, R-1 = C-n H2n+1, R-2 = C-m H2m+1; Cat 1 : m = 1, n = 1; Cat 2: m = 2, n = 1; Cat 3: m = 3, n = 1; Cat 4: m = 2, n = 2] were synthesized and used to catalyze ethylene polymerization in toluene. The influences arousing from changes in alkyl substituents on the backbone carbon of the catalyst ligand on the ethylene polymerization activities, microstructures and serni-crystalline properties of polyethylene were evaluated under varied polymerization temperatures and catalyst concentrations. It was showed that the catalysts with asymmetric alkyl substituents, i.e. R, and R, were different, had higher activity and produced polyethylenes having higher molecular weight as compared with those with symmetric substituents. With Cat 2 and Cat 3, the ethylene polymerization activities reached 1.86 x 10(3) kg PE/(mol Ni . h) and 1.92 x 10(3) kg PE/(mol Ni . h), and molecular weights of polymers achieved 68.2 x 10(4) and 101.9 x 10(4), respectively under the condition of 20 degrees C, atmosphere and 5.8 mmol/L of catalyst concentration. Analysis of polyethylene chain structures indicated that the main branching chain structure in polyethylene was methyl groups, and the branching degree was dependent mainly on polymerization temperature. Meanwhile, it was also showed that the polyethylene synthesized with alpha-diimine nickel complexes containing diversed alkyl substituents on ligand backbone had comparatively high proportion of hexyl and longer alkyl branching chains in polymer molecules, especially for the cases when polymerization was conducted at 40 degrees C.
Transition Metal Acetylide Catalysts for Polymerization of Alkynes

Xiaowei Zhan,Mujie Yang

DOI: https://doi.org/10.1016/s1381-1169(00)00559-8

2001-01-01

Abstract:The catalytic activity of a series of nickel acetylides and chlorides containing different phosphine and alkynyl ligands: NiL2(CCR)2; NiL2(CCR)Cl and NiL2Cl2 (L2=(PPh3)2, (PBu3)2 and Ph2PCH2CH2PPh2; R=p-C6H4CCH, C6H5, H, CH2OH and CH2OCOCH3), towards p-diethynylbenzene polymerization is compared. The catalytic property of these acetylides is related to chlorine, phosphines and alkynyl ligands bonded to the metal atoms. The polarity, steric hindrance and electron-donating ability of ligands are main factors influencing the catalytic activity of these complexes. Nickel acetylides were found to be novel efficient initiating systems for the alkyne polymerization. The polymerization proceeds under mild conditions to give soluble π-conjugated polymers with weight average molecular weights as high as 4.8×104 in yields as high as 95%.
Palladium/Benzoic Acid-Catalyzed Regio- and Stereoselective Polymerization of Internal Diynes and Diols Through C(sp(3))-H Activation

Jia Wang,Tianwen Bai,Yue Chen,Canbin Ye,Ting Han,Anjun Qin,Jun Ling,Ben Zhong Tang

DOI: https://doi.org/10.1021/acsmacrolett.9b00448

IF: 5.8

2019-01-01

ACS Macro Letters

Abstract:The C-H activation has been a hot research area in organic chemistry, and the most difficult one is the C(sp(3))-H activation. Although the C-H activation has been introduced to the research of synthetic polymer chemistry, the polymerization developed based on C(sp(3))-H activation is rarely reported, which will enrich the tools for the preparation of functional polymers. In this work, palladium/benzoic acid catalyzed polymerization of internal diynes and diols through C(sp(3))-H activation was successfully established. Regio-and stereoregular functional poly(allylic ether)s with 100% E-isomers and high weight average molecular weights (M-w up to 33200) were prepared in excellent yield (98%). The reaction mechanism was unveiled with the assistance of density functional theory calculations. Furthermore, the thin films of polymers display high refractive indices and low optical dispersions. The polymer containing tetraphenylethene moiety displays the aggregation-enhanced emission feature and could be used to generate 2D fluorescent photopattern. Thus, this work not only establishes a powerful polymerization based on C(sp(3))-H activation, but also furnishes functional polymers for diverse applications.
Functionalization of Disubstituted Polyacetylenes Through Polymer Reactions: Syntheses of Functional Poly(1-phenyl-1-alkyne)s

Z Li,YQ Dong,AJ Qin,JWY Lam,YP Dong,WZ Yuan,JZ Sun,JL Hua,KS Wong,BZ Tang

DOI: https://doi.org/10.1021/ma051907q

IF: 5.5

2005-01-01

Macromolecules

Abstract:ADVERTISEMENT RETURN TO ISSUEPREVCommunication to the...Communication to the EditorNEXTFunctionalization of Disubstituted Polyacetylenes through Polymer Reactions: Syntheses of Functional Poly(1-phenyl-1-alkyne)sZhen Li, Yongqiang Dong, Anjun Qin, Jacky W. Y. Lam, Yuping Dong, Wangzhang Yuan, Jingzhi Sun, Jianli Hua, Kam Sing Wong, and Ben Zhong TangView Author Information Departments of Chemistry and Physics, The Hong Kong University of Science & Technology, Clear Water Bay, Kowloon, Hong Kong, and Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China Cite this: Macromolecules 2006, 39, 2, 467–469Publication Date (Web):December 15, 2005Publication History Received31 August 2005Revised1 December 2005Published online15 December 2005Published inissue 24 January 2006https://pubs.acs.org/doi/10.1021/ma051907qhttps://doi.org/10.1021/ma051907qrapid-communicationACS PublicationsCopyright © 2006 American Chemical SocietyRequest reuse permissionsArticle Views761Altmetric-Citations42LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-AlertscloseSupporting Info (1)»Supporting Information Supporting Information SUBJECTS:Functional groups,Functionalization,Hydrocarbons,Polymerization,Polymers Get e-Alerts
Allied Organo- and Metal Catalysis in C–H Functionalization Polymerization

Dahui Zhao,Chen Li

DOI: https://doi.org/10.1055/s-0043-1772920

2023-01-01

Synfacts

Abstract:Key words C–H functionalization polymerization - synergistic catalysis - sequence-controlled copolymers
Transition metal acetylide catalysts for polymerization of alkynes 5. Homogeneous copolymerization of polar with non-polar alkynes

yang li,mujie yang

DOI: https://doi.org/10.1016/S1381-1169(02)00058-4

2002-01-01

Abstract:A series of palladium acetylide complexes with the structures of Pd(PPh3)2(CCR)2 (R=C(CH3)2OH, CH2OCOCH3, CH2OH, p-C6H4CCH, C6H5) were developed for homogeneous copolymerization of polar with non-polar alkynes. The catalytic activity of the five palladium acetylide complexes towards copolymerization of propargyl alcohol (OHP) with p-diethynylbenzene (p-DEB) is compared and discussed. The complexes containing polar alkynyl ligands show higher activity than corresponding complexes containing non-polar ligands. Solvent systems exhibit significant influence on realizing homogeneous polymerization and obtaining soluble copolymer. The copolymerization of OHP with p-DEB initiated with these catalysts could proceed under mild conditions to give soluble π-conjugated copolymer in yields as high as 66%. Features for copolymerization of OHP with p-DEB using Pd(PPh3)2(CCCH2OH)2 in CHCl3/MeOH mixed solvents have been described.
Polymerization of Substituted Acetylenes Carrying Non-Polar and Polar Groups with Transition Metal Acetylide Catalysts

XW Zhan,MJ Yang,HM Sun

DOI: https://doi.org/10.1002/1521-3927(20010401)22:7<530::aid-marc530>3.0.co;2-n

IF: 5.006

2001-01-01

Macromolecular Rapid Communications

Abstract:A new series of single-component air-stable transition metal acetylide catalysts for the polymerization of substituted acetylenes carrying non-polar and polar groups was developed. The catalytic properties of transition metal acetylides are related to transition metals, phosphines and acetylenic ligands. Nickel acetylides show higher catalytic activity towards the polymerization of substituted acetylenes containing non-polar groups, while palladium acetylides show higher catalytic activity towards the polymerization of substituted acetylenes carrying polar groups. Palladium acetylides with PPh 3 ligand are efficient catalysts for the polymerization of substituted acetylenes bearing both non-polar and polar groups.
Polymerization of P-Diethynylbenzene and Its Derivatives with Nickelocene Acetylide Catalysts Containing Different Phosphine and Alkynyl Ligands

XW Zhan,MJ Yang

DOI: https://doi.org/10.1002/1521-3927(20001101)21:17<1263::aid-marc1263>3.0.co;2-x

IF: 5.006

2000-01-01

Macromolecular Rapid Communications

Abstract:We developed a new series of single-component air- and moisture-stable catalysts for alkyne polymerization based on nickelocene complexes containing phosphine and alkynyl ligands. Chlorine, phosphine and alkynyl ligands exhibited great influence on the catalytic activity of the nickelocene complexes. Highly soluble polymers with fairly high molecular weight (Mw 23 400) were obtained in high yields (85%) in the homogeneous polymerization of p-diethynylbenzene initiated with five nickelocene acetylides (π-C5H5)LNi(C≡CR) (L = PPh3, PBu3; R = p-C6H4C≡CH, C6H5, H) under mild conditions.
Metal-Free Catalysts for the Polymerization of Alkynyl-Based Monomers

Jie Zhang,Zhiming Zhang,Fulin Yang,Haoke Zhang,Jingzhi Sun,Benzhong Tang

DOI: https://doi.org/10.3390/catal11010001

IF: 3.9

2020-01-01

Catalysts

Abstract:Novel polymerizations based on alkyne monomers are becoming a powerful tool to construct polymers with unique structures and advanced functions in the areas of polymer and material sciences, and scientists have been attracted to develop a variety of novel polymerizations in recent decades. Therein, catalytic systems play an indispensable role in the influence of polymerization efficiencies and the performances of the resultant polymers. Concerning the shortcomings of metallic catalysts, much of the recent research focus has been on metal-free polymerization systems. In this paper, metal-free catalysts are classified and the corresponding polymerizations are reviewed, including organobase-catalyzed polymerizations, Lewis-acid-catalyzed polymerizations, as well as catalyst-free polymerizations. Moreover, the challenges and perspectives in this area are also briefly discussed.
Enhancing Suppression of Chain Transfer via Installing Bulky N‐ortho‐Aryl Substituents into α‐Diimine Nickel System

Zhanshan Ma,Nan Nie,Wenmin Pang,Ao Chen,Dan Peng

DOI: https://doi.org/10.1002/cctc.202400619

IF: 4.5

2024-06-12

ChemCatChem

Abstract:Recently, the important role of sterically bulky aromatic substituents at the axial position of the metal center for synthesizing high‐performance catalysts were recognized. In this study, a series of α‐diimine nickel complexes with bulky N‐ortho‐aryl substituents were designed and synthesized. The as‐synthesized nickel complexes showed high activities (up to 2.3×107 g·mol‐1·h‐1) and superior thermostability, giving access to moderately branched polyethylenes (35‐86/1000C) with high molecular weights (up to 197.5×104 g·mol‐1). The polyethylene materials generated by these nickel complexes at 80 °C exhibited outstanding tensile mechanical. In addition, these nickel complexes could also catalyze the copolymerization of ethylene and polar monomer with modest activity (such as undecenoic acid, 10‐undecen‐1‐ol and 6‐chlorohex‐1‐ene), yielding functionalized polyolefin with adjustable molecular weights (6.8‐222.9×104 g·mol‐1) and incorporation ratios (0.2‐4.3 mol%).

chemistry, physical
Catalytic arylalkylation of alkenyl amines at remote sites via directed nickel catalysis

Jian Han,Yinheng Tang,Jie Huang,Chun Luo,Lanlan Zhang,Wenyi Li,Chao Wang

DOI: https://doi.org/10.1002/cjoc.202200647

IF: 5.56

2022-11-12

Chinese Journal of Chemistry

Abstract:Comprehensive Summary Directing group‐assisted, transition metal‐catalyzed three‐component difunctionalization of alkenes has emerged as a powerful tool to drive molecular complexity. However, this strategy generally works with the substrates bearing directing groups in close proximity to the alkene moieties, due to the preference for formation of kinetically stable five‐membered metallacycles. Herein, we have disclosed a complementary strategy to accomplish a nickel‐catalyzed remote arylalkylation of alkenyl amines with excellent regioselectivity and diastereofidelity, involving rare six‐ or seven‐membered metallacycles. This general protocol is compatible with a series of δ‐ and ε‐alkenyl amines, providing corresponding valuable δ,ε‐ and ε,ζ‐difunctionalized aliphatic amines that would be difficult to synthesize. The coordination of the bidentate picolinamide auxiliary and the facile oxidative addition of alkyl halides to Ni(I) species are the key to the success of the developed remote olefin dicarbofunctionalization. This article is protected by copyright. All rights reserved.

chemistry, multidisciplinary
Dual-Site Polymeric Heterogeneous α-Diimine Ni Catalysts with Tailored Spatial Distribution for Ethylene Polymerization

Jie Li,Yu Wang,Wen Cai,Gang Yang,Qiuhui Tian,Yongshuang Huang,Dan Peng,Chen Zou,Chen Tan

DOI: https://doi.org/10.1021/acs.macromol.2c02344

IF: 5.5

2023-04-06

Macromolecules

Abstract:Dual-site molecular heterogeneous catalysts for synthesizing polyolefin in-reactor blends have received increasing attention in academia and industry. It is hypothesized that the mesoscopic spatial distribution of different catalyst molecules in dual-site catalyst particles will have significant impacts on the superstructures and properties of polyolefin in-reactor blending products. It is difficult for typical heterogenization to tune the spatial distribution of different molecular catalyst components in the particles. In this contribution, a self-supporting strategy based on nickel-catalyzed precipitation coordination polymerization of a polar monomer was used to achieve not only heterogenization of the catalysts but also spatial distribution tuning of different catalytic components in the polymeric particles. These polymeric heterogeneous dual-site catalysts led to higher activities compared with homogeneous molecular catalysts. Moreover, they resulted in high molecular weights, good morphological control, and improved compatibility with polar materials. The composition and physical properties of the blend can be controlled by the molar ratio of the two catalytic components. Interestingly, it was shown that the different spatial distribution types can result in great differences in thermal, mechanical, and rheological properties and applications of the obtained blends.

polymer science
Congestion of steric and electronic factors in α-diimine nickel precatalysts for high-temperature ethylene polymerization in accessing direct PE elastomer

Geng Ren,Rongyan Yuan,Qaiser Mahmood,Yanning Zeng,Yizhou Wang,Zexu Hu,Song Zou,Tongling Liang,Wen-Hua Sun

DOI: https://doi.org/10.1016/j.molstruc.2024.139037

IF: 3.841

2024-06-26

Journal of Molecular Structure

Abstract:In α-diimine-nickel catalysts mediated ethylene polymerization, the synergistic impact of steric and electronic factors plays an instrumental role in fine-tuning catalytic activity, polymer molecular weights, microstructure, as well as mechanical and elastic properties. In this study, a new series of nonsymmetrical bis(arylimino)-acenaphthene-nickel complexes was prepared and investigated for ethylene polymerization. These complexes feature both bulky N-2,6-dibenzhydryl-3,4,5-fluorophenyl imine and smaller N-2,6-di( R )-4-(R 1 )phenyl imine units [ Ni 2Me (R, = Me, R 1 = H ), Ni 2Et (R, = Et, R 1 = H ) and Ni 2iPr (R, = iPr, R 1 = H ), Ni 3Me (R, R 1 = Me), Ni 2Et,Me (R, = Et, R 1 = Me)]. The incorporation of both steric congestion and strong electronic withdrawal groups into the catalyst structure resulted in significantly improved catalytic performance: high thermal stability and exceptional activity were observed at both ambient temperature (21.24 × 10 6 at 30 °C) and industrially relevant temperatures (1.65 × 10 6 at 100 °C). Polymer molecular weights and branching degree were tunable by adjusting the ligand structure and reaction conditions. This correlation extended to mechanical and elastic properties, demonstrating high tensile strength at low temperatures and good elastic recovery at high reaction temperatures, consistent with typical polyolefin elastomers.

chemistry, physical
Concerted flexible and steric strategy in α-diimine nickel and palladium mediated insertion (Co-)Polymerization

Hongyu Ji,Yuxing Zhang,Yue Chi,Zhongbao Jian

DOI: https://doi.org/10.1016/j.polymer.2023.126591

IF: 4.6

2023-12-15

Polymer

Abstract:To address the issues of poor thermostability of catalyst and low polymer molecular weight resulted from chain transfer at high temperature in olefin polymerization, versatile strategies have been utilized in the benchmark α-diimine nickel and palladium catalysts. In this contribution, a concerted flexible and steric strategy was highlighted in the α-diimine nickel and palladium catalysts. Compared to the seminal Brookhart catalyst, these newly generated nickel catalysts exhibited improved thermostability over a wide range of temperature from 30 °C to 130 °C, showed higher catalytic activities, and produced significantly higher (4.7–5.8 times) molecular weight polymers in ethylene polymerization, which are highly branched polyethylenes (76–110/1000C, SR = 72 %). Notably, high molecular weight polyethylene (up to 219 kg mol −1 ) was even afforded at 130 °C, which is extremely challenging when the flexible substituent is used in α-diimine system. The corresponding palladium analogues by using the same strategy further produced high molecular weight ethylene-methyl acrylate copolymers (up to 137 kg mol −1 ) at the difficult 70 °C in the copolymerization of ethylene and methyl acrylate. The incorporation of methyl acrylate could be tuned (0.6–2.9 mol%), where methyl acrylate units distribute both in the main chain and at the end of branches (15 %:85 %).

polymer science
Promoting Ethylene (co)Polymerization in Aliphatic Hydrocarbon Solvents Using tert ‐Butyl Substituted Nickel Catalysts

Ao Chen,Daohong Liao,Changle Chen

DOI: https://doi.org/10.1002/cjoc.202100642

IF: 5.56

2021-12-09

Chinese Journal of Chemistry

Abstract:In the past few decades, the development of high‐performance catalysts has been a key driving force and a center of research efforts in the field of olefin polymerization. However, a major discrepancy exists between industrial researches which utilize aliphatic hydrocarbon solvents, and academic researches which predominantly focus the catalytic properties in aromatic solvents. In this contribution, a novel diaryl‐methyl aniline bearing eight tert‐butyl groups was prepared and subsequently transformed to four different kinds of imine‐type ligands. The corresponding nickel complexes as well as their counterparts derived from diphenyl‐methyl aniline without the tert‐butyl groups were prepared and investigated in ethylene polymerization. The multiple tert‐butyl groups enable great solubility of the metal complexes in aliphatic hydrocarbon solvents, leading to similar polymerization properties comparing with aromatic solvents. In contrast, their counterparts without tert‐butyl groups demonstrate significant solvent effect. Moreover, the ligand electronic and steric effects induced by the tert‐butyl groups lead to nickel catalysts with great thermal stability (up to 140 oC) and capabilities of generating high molecular weight polymer and copolymer products. This tert‐butyl strategy can be potentially applied to many different polymerization catalyst systems and help to bridge academic studies with practical applications.

chemistry, multidisciplinary
Alkene Dicarbofunctionalisation via High-Valent Nickel Catalysis

Peng Wang,Dao-Ming Wang,Li-Qin She,Yu-Qing He,Yichen Wu,Yong Tang

DOI: https://doi.org/10.26434/chemrxiv-2024-h02wc

2024-04-16

Abstract:Great advances have been made by leveraging high-valent Pd(II)/Pd(IV) catalysis in the areas of C–H activation and alkene difunctionalisation, thus representing a powerful approach for the construction of carbon-carbon and carbon-heteroatom bond. However, the catalytic reactions involving high-valent Ni(II)/Ni(IV) catalysis are largely underdeveloped. Here we report a Ni(II)-catalysed dicarbofunctionalisation of unactivated alkenes via high-valent Ni(II)/Ni(IV) catalysis. This dicarbofunctionalisation protocol provides a highly efficient and direct route towards vicinal substituted alkanes using primary, secondary, and tertiary amides, as well as secondary and tertiary amines as the native directing group under redox-neutral conditions that are challenging to access through conventional methods. The key to the success of this reaction is the use of a bulky β-diketone ligand, which could enable the insertion of alkene to aryl-Ni(II) species, stabilize the alkyl-Ni(II) species and inhibit the homolytic alkyl-Ni(II) cleavage. This dicarbofunctionalisation reaction features the use of native directing group, a broad substrate scope, and excellent scalability. The resulting Weinreb amide-derived products can be readily derivatized to a variety of ketones and aldehyde, which are fundamentally useful in synthetic chemistry. In addition, this protocol has been employed for the efficient preparation of several bioactive compounds, showcasing the significant synthetic values of our current method.

Chemistry
Difunctionalization of gem -difluoroalkenes for amination and heteroarylation via metal-free photocatalysis

Yuanchen Zhong,Zhen Zhuang,Xiaofei Zhang,Bin Xu,Chunhao Yang

DOI: https://doi.org/10.1039/d4cc00528g

IF: 4.9

2024-01-01

Chemical Communications

Abstract:Herein we report a metal-free photocatalytic method for amination and heteroarylation of gem -difluoroalkenes.

chemistry, multidisciplinary
Radical co-polymerization of diiminedibromidenickel(II)-functionalized olefin with styrene: synthesis of polymer-incorporated nickelII α-diimine catalysts for ethylene polymerization

Dao Zhang,Guo-Xin Jin

DOI: https://doi.org/10.1016/j.apcata.2003.11.003

2004-01-01

Abstract:Graphic

Difunctionalization Applied to Polymerization

Nickel(II) Α -Diimine Catalysts with Carboxyl Groups for Ethylene Oligomerization and Polymerization

ETHYLENE POLYMERIZATIONS CATALYZED BY Α-Diimine COMPLEXES WITH DIFFERENT SUBSTITUENTS ON LIGAND BACKBONE

Transition Metal Acetylide Catalysts for Polymerization of Alkynes

Palladium/Benzoic Acid-Catalyzed Regio- and Stereoselective Polymerization of Internal Diynes and Diols Through C(sp(3))-H Activation

Functionalization of Disubstituted Polyacetylenes Through Polymer Reactions: Syntheses of Functional Poly(1-phenyl-1-alkyne)s

Allied Organo- and Metal Catalysis in C–H Functionalization Polymerization

Transition metal acetylide catalysts for polymerization of alkynes 5. Homogeneous copolymerization of polar with non-polar alkynes

Polymerization of Substituted Acetylenes Carrying Non-Polar and Polar Groups with Transition Metal Acetylide Catalysts

Polymerization of P-Diethynylbenzene and Its Derivatives with Nickelocene Acetylide Catalysts Containing Different Phosphine and Alkynyl Ligands

Metal-Free Catalysts for the Polymerization of Alkynyl-Based Monomers

Enhancing Suppression of Chain Transfer via Installing Bulky N‐ortho‐Aryl Substituents into α‐Diimine Nickel System

Catalytic arylalkylation of alkenyl amines at remote sites via directed nickel catalysis

Dual-Site Polymeric Heterogeneous α-Diimine Ni Catalysts with Tailored Spatial Distribution for Ethylene Polymerization

Congestion of steric and electronic factors in α-diimine nickel precatalysts for high-temperature ethylene polymerization in accessing direct PE elastomer

Concerted flexible and steric strategy in α-diimine nickel and palladium mediated insertion (Co-)Polymerization

Promoting Ethylene (co)Polymerization in Aliphatic Hydrocarbon Solvents Using tert ‐Butyl Substituted Nickel Catalysts

Alkene Dicarbofunctionalisation via High-Valent Nickel Catalysis

Difunctionalization of gem -difluoroalkenes for amination and heteroarylation via metal-free photocatalysis

Radical co-polymerization of diiminedibromidenickel(II)-functionalized olefin with styrene: synthesis of polymer-incorporated nickelII α-diimine catalysts for ethylene polymerization