Abstract:3D-printed carbon fiber composites hold significant potential in aerospace applications because of their lightweight, high strength and complex structure fabrication capabilities. However, additive manufacturing characteristics such as high porosity, anisotropy and continuous fiber content significantly affect the mechanical properties of printed parts. The aim of this study is to investigate the influence of hybrid printing of short and continuous carbon fibers on the mechanical properties and failure mechanisms of composites and to develop a model to predict elastic properties considering porosity. First, mechanical testing and characterization of short and continuous fiber reinforced polyamide (nylon) print filaments are performed. The results indicate that the elastic modulus and ultimate strength of continuous carbon fiber filaments reach 60 GPa and 1500 MPa, respectively, while the strength and elastic modulus of short carbon fiber filaments reach 60 MPa and 1 GPa, respectively. Then tensile specimens with different continuous fiber orientations and different continuous fiber placement sequences are printed and tested using a multi-material 3D printing technique. The specimens are characterized before and after testing using scanning electron microscopy and microscopy to assess the porosity and failure mechanisms of specimens with different configurations. The results show that the mechanical properties of the printed parts are much lower than those of the print filaments, which proves the serious negative impact of the material extrusion process on the mechanical properties of the printed structural parts. Finally, an analytical method for predicting the elastic behavior of printed composites is developed by introducing the porosity factor in the volume-averaged stiffness model. For continuous and short fiber filled composites with different fiber contents and printing orientations, the predicted results are in agreement with the experiments, and the prediction error is greatly reduced from 30% to less than 5%.

Printing Process and Application Progress of 3D Printing Continuous Fiber Reinforced Composites

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective

An Overview of Research on FDM 3D Printing Process of Continuous Fiber Reinforced Composites

Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites

Design and Implementation of 3D Printing System for Continuous CFRP Composites

3D Printed Fibre-Reinforced Polymer Composites — Review of the Fused Deposition Modeling Process and Mechanical Performance of Products

Design and Manufacturing of Lightweight Composite Structures Based on Continuous Fiber Reinforced Composites 3 D Printing

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Research Progress of 3D Printing Fiber Reinforced Composite

Design and 3D Printing of Continuous Fiber Reinforced Heterogeneous Composites

Study on 3D Printing Process and Performance of Resin Matrix Composite Lightweight Structure

Research on 3D Printing of Continuous Fiber Self-reinforced Composites and Its Recyclability

3D-printing of Continuous Fiber: A review of processes, materials and properties

Manufacturing and 3D printing of continuous carbon fiber prepreg filament

Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect

3D printing continuous natural fiber reinforced polymer composites: A review

3D printed continuous fiber reinforced composite lightweight structures: A review and outlook

Correction To: Interfacial Behaviors of Continuous Carbon Fiber Reinforced Polymers Manufactured by Fused Filament Fabrication: A Review and Prospect

Process evaluation, tensile properties, mathematical models, and fracture behavior of 3D printed continuous fiber reinforced thermoplastic composites

Research progress of carbon materials in the field of three-dimensional printing polymer nanocomposites