Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective

Recent progress of 3D printed continuous fiber reinforced polymer composites based on fused deposition modeling: a review

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Design and Extrusion-Based 3D Printing of Continuous Fiber Composites: Status, Challenges, and Opportunities

Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

3D printing continuous natural fiber reinforced polymer composites: A review

Unlocking the future of precision manufacturing: A comprehensive exploration of 3D printing with fiber-reinforced composites in aerospace, automotive, medical, and consumer industries

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

Robotic 3D Printing of Continuous Fiber Reinforced Thermoset Composites

Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine

3D printing of continuous fiber reinforced composites: A review of the processing, pre- and post-processing effects on mechanical properties

Direct-write 3D printing of UV-curable composites with continuous carbon fiber

A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties

Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites

3D printing of curvilinear fiber reinforced variable stiffness composite structures: A review

Ultrasound-assisted 3D printing of continuous fiber-reinforced thermoplastic (FRTP) composites

3D-Printed Carbon Fiber Reinforced Polymer Composites: A Systematic Review