Abstract:3D-printed carbon fiber composites hold significant potential in aerospace applications because of their lightweight, high strength and complex structure fabrication capabilities. However, additive manufacturing characteristics such as high porosity, anisotropy and continuous fiber content significantly affect the mechanical properties of printed parts. The aim of this study is to investigate the influence of hybrid printing of short and continuous carbon fibers on the mechanical properties and failure mechanisms of composites and to develop a model to predict elastic properties considering porosity. First, mechanical testing and characterization of short and continuous fiber reinforced polyamide (nylon) print filaments are performed. The results indicate that the elastic modulus and ultimate strength of continuous carbon fiber filaments reach 60 GPa and 1500 MPa, respectively, while the strength and elastic modulus of short carbon fiber filaments reach 60 MPa and 1 GPa, respectively. Then tensile specimens with different continuous fiber orientations and different continuous fiber placement sequences are printed and tested using a multi-material 3D printing technique. The specimens are characterized before and after testing using scanning electron microscopy and microscopy to assess the porosity and failure mechanisms of specimens with different configurations. The results show that the mechanical properties of the printed parts are much lower than those of the print filaments, which proves the serious negative impact of the material extrusion process on the mechanical properties of the printed structural parts. Finally, an analytical method for predicting the elastic behavior of printed composites is developed by introducing the porosity factor in the volume-averaged stiffness model. For continuous and short fiber filled composites with different fiber contents and printing orientations, the predicted results are in agreement with the experiments, and the prediction error is greatly reduced from 30% to less than 5%.

Study on 3D Printing Process and Performance of Resin Matrix Composite Lightweight Structure

Review of Matrix Solidification and Forming Processes of Composite Materials

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

An Overview of Research on FDM 3D Printing Process of Continuous Fiber Reinforced Composites

Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites

A review on process parameter influence and optimization for 3D printing of fiber-reinforced thermoplastic composites

Acoustic-assisted DLP 3D Printing Process for Carbon Nanofiber Reinforced Honeycomb Structures

3D printing of continuous carbon fibre reinforced polymer composites with optimised structural topology and fibre orientation

Process evaluation, tensile properties, mathematical models, and fracture behavior of 3D printed continuous fiber reinforced thermoplastic composites

Health information technology and team work to improve health care.

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

The technology and current applications of continuous fiber‐reinforced thermoplastic composites

Selectively Enhanced 3D Printing Process and Performance Analysis of Continuous Carbon Fiber Composite Material

Mechanical and Material Characterization of 3d Printed Continuous Fiber Reinforced Photopolymer Matrix Composites

Fabrication and Formability of Continuous Carbon Fiber Reinforced Resin Matrix Composites Using Additive Manufacturing

Manufacturing Technology of Lightweight Fiber-Reinforced Composite Structures in Aerospace: Current Situation and toward Intellectualization

Cardiac CT angiography in children with congenital heart disease.

Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect

3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion and In Situ Impregnation Processes