Abstract:Closed Brayton cycle can efficiently convert the fission energy of the reactor into electricity, which is an ideal energy conversion system for long life, high-power and compact space reactor. In order to ensure the safe and reliable operation of turbines, compressors and generators, the space closed Brayton cycle intends to cool bearings and generators by working fluid, such as He-Xe mixture. So the cooling will inevitably affect the cycle efficiency. In this paper, three different cooling schemes for bearings and generators were proposed for the space closed Brayton cycle. They are: (1) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream before the reactor inlet, (2) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream after the reactor outlet, and (3) setting an independent cooling loop. The influence of bleeding gas flow rate on the key components was analyzed, and the three schemes were compared. The results show that the temperature difference at hot end of recuperator, molar specific power of reactor, turbine inlet temperature and molar specific work of schemes (1) and (2) decrease with increase of bleeding ratio. The scheme (3) is not effected by bleeding ratio. For a given bleeding ratio, the increasing of compression ratio will promote the space Brayton cycle efficiency of the scheme (1) and (2) at first, then the efficiency reaches its maximum value, with further increasing of compression ratio, the efficiency will reduce. But further increasing of bleeding ratio will reduce the temperature difference at hot end of recuperator, the cycle efficiency and compression ratio can not reach the maximum when the bleeding ratio increases. Therefore, there are optimal bleeding ratio, maximum cycle efficiency and corresponding compression ratio. And the maximum cycle efficiency of scheme (1) and (2) increases first and then decreases with the increase of bleeding ratio. The scheme (1) has the highest efficiency of power generation, 21.63%, because the bypass can reduce the core heat absorption and the turbine inlet temperature is the highest. The scheme (3) has the lowest efficiency which is 19.78% with the highest molar specific power which is 0.8832kJ∙mol-1 , and this scheme can reduce the core inlet temperature and the power of recuperator. The analysis provides a reference for the cooling design of the space closed Brayton cycle in the future.

Design and Cooling of Permanent Magnet Generator in Mw-Class Space Closed Brayton Cycle System

Enhanced Ventilation and Thermal Performance by Skewed Through Holes on Rotor Yoke in Forced Air-Cooled Permanent Magnet Wind Generators

3D Thermal Analysis of a Permanent Magnet Motor with Cooling Fans

Optimization Design of a Permanent Magnet Synchronous Generator for a Potential Energy Recovery System

Effect of Cooling Schemes on Performance of MW-class Space Nuclear Closed Brayton Cycle

Coupling Study of Onboard Power Generation System of Magnetohydrodynamics Enhanced Brayton Cycle

A Novel Liquid Metal MHD Enhanced Closed-Brayton-Cycle Power Generation System for Hypersonic Vehicles: Thermodynamic Analysis and Performance Evaluation with Finite Cold Source

Thermodynamic and Mass Analysis of a Novel Two-Phase Liquid Metal MHD Enhanced Energy Conversion System for Space Nuclear Power Source

Novel Onboard High-Power Electricity Generation System of Closed-Brayton-Cycle Enhanced by Multi-Stage LMMHD Generators: Coupling Analysis with Propulsion System

Design of A 10 Mw Dual-Stator Superconducting Permanent Magnet Wind Power Generator

EFFECTS OF COOLING SCHEMES ON THE PERFORMANCE OF SPACE CLOSED BRAYTON CYCLE

Dynamic Characteristics Analysis for a Novel Double-Rotor He-Xe Closed-Brayton-Cycle Space Nuclear Power Generation System

Applications of Brayton cycle technology to space power

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Investigation Of The Cooling And Thermal-Measuring System Of A Compound-Structure Permanent-Magnet Synchronous Machine

The investigation of thermo-economic performance for dry-cooled closed Brayton cycle coupled to nuclear microreactors using different coolants

Coupled Characteristics and Performance of Heat Pipe Cooled Reactor with Closed Brayton Cycle

Thermal‐hydraulic analysis of gas‐cooled space nuclear reactor power system with closed Brayton cycle

Experimental and Theoretical Analysis of Magnetic-Thermal-mechanical Coupling of Permanent Magnet Coupling

Numerical simulation of jet cooling method inside air gap in a high-power permanent magnet synchronous motor

Performance Evaluation for a Combined Power Generation System of Closed-Brayton-cycle and Thermoelectric Generator with Finite Cold Source at Room Temperature on Hypersonic Vehicles