Abstract:One of the parameters required for a high-performance drive of a surface-mounted permanent magnet synchronous motor (SPMSM) operating in the flux-weakening region is the torque ripple reduction. In general, the torque ripple results from many reasons, such as the machine structure, oscillations of measured speed, etc. Hence, this article proposes an optimized strategy that works in conjunction with a variable switching frequency pulsewidth modulation algorithm to reduce the torque ripple peak. For the modulating algorithm, the updated frequency changes linearly with the desired torque ripple and its predicted maximum peak. For the proposed strategy, the reflection of proportional-integral (PI) parameters is observed at the torque ripple caused by the current ripples. Therefore, a robust method for adjusting PI parameters is proposed that relies on the improved fitness function that can minimize the regulators' error and maximize the drive stability bandwidth in the flux-weakening region. This objective function is optimized offline using a genetic algorithm optimization technique. Meanwhile, a third-order generalized integral flux observer is applied in this article, providing evidence of torque ripple reduction. For driving in the flux-weakening region, the reference magnitude of the duty cycles can produce the required d-axis reference current to prevent the saturation of current controllers. Finally, comprehensive simulations and experiments are presented to validate the proposed strategy effectively. In comparison with the conventional method, the proposed strategy can reduce the copper and switching losses simultaneously and control the current and speed in the flux-weakening region efficiently.

Torque Sideband Harmonics Suppressing in Uneven Power Distribution for -Module In-Wheel PMSM Drives

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

A Multipulse Pattern Modulation Scheme for Harmonic Mitigation in Three-Phase Multimotor Drives

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Self-Correction CPS-Based Torque Sideband Harmonic Suppression of Triple Redundant In-Wheel PMSMs

The Suppression of Torque Sideband Harmonics above Switching Frequency in the Unbalanced Operation of 3-Module PMSM

An Optimized Modulation of Torque and Current Harmonics Suppression for Dual Three-Phase PMSM

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Selective Torque Harmonic Elimination for Dual Three-Phase PMSMs Based on PWM Carrier Phase Shift

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

Comprehensive Analysis and Reduction of Torque Ripples in Three-Phase Four-Switch Inverter-Fed PMSM Drives Using Space Vector Pulse-Width Modulation

Synchronous Optimal Torque PWM with Low Torque Ripple under Low Carrier Ratio

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Hybrid Space Vector Modulation Strategy for Torque Ripple Minimization in Three-Phase Four-Switch Inverter-Fed PMSM Drives

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Torque Ripple Elimination Based on Inverter Voltage Drop Compensation for a Three-Phase Four-Switch Inverter-Fed PMSM Drive under Low Speeds

Power-Model-Based Adaptive Overmodulation Scheme for Field-Weakening Control of PMSM

Analysis and Optimization of Torque Ripple Reduction Strategy of Surface-Mounted Permanent-Magnet Motors in Flux-Weakening Region Based on Genetic Algorithm

The Mechanism for Suppressing High-Frequency Vibration of Multiphase Surface Permanent Magnet Motors via PWM Carrier Phase Shifting