Abstract:Five-phase permanent magnet synchronous motors offer merits of high fault tolerant capability and high torque per rms ampere and, thus, are suitable for applications, such as aerospace and electric vehicles. However, the complex machine model causes difficulties in controller design. Besides, having 32 voltage vectors with various effects on currents and torque, the selection of the optimal switching state becomes a challenge to achieve a performance tradeoff. This paper proposes an improved model predictive direct torque control (MPDTC) strategy consisting of a quadratic evaluation method (QEM) and a harmonic voltage elimination method (HVEM). In QEM, the preliminary vector is first chosen from the vectors of the outer decagon according to a cost function for torque and flux regulation. This preliminary vector, composed of three sets of different amplitudes, is further synthesized according to the error between the actual torque/flux and the references. In this way, the optimal voltage vector can be obtained without significantly increasing the computational burden. In HVEM, by subtracting the harmonics voltage component from the vector determined previously in QEM, the final voltage vector is obtained for mitigating stator harmonic currents. The proposed control strategy is compared with the conventional MPDTC approach. The results confirm the effectiveness of the proposed methods with good steady-state performance while maintaining quick dynamic responses.

Self-Correction CPS-Based Torque Sideband Harmonic Suppression of Triple Redundant In-Wheel PMSMs

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

Torque Sideband Harmonics Suppressing in Uneven Power Distribution for -Module In-Wheel PMSM Drives

The Suppression of Torque Sideband Harmonics above Switching Frequency in the Unbalanced Operation of 3-Module PMSM

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

An Optimized Modulation of Torque and Current Harmonics Suppression for Dual Three-Phase PMSM

Techniques to restrain harmonics of dual three-phase permanent magnet synchronous motor

High-Frequency Current Harmonic Analysis and Suppression in Dual Three-Phase PMSMs with Advanced Carrier Phase-Shift PWM

Selective Torque Harmonic Elimination for Dual Three-Phase PMSMs Based on PWM Carrier Phase Shift

Novel Virtual-Finite-Control-Set-Based Model Predictive Torque Control of Five-Phase PMSM With Enhanced Third Harmonic Current Suppression

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

An Improved Model Predictive Direct Torque Control Strategy for Reducing Harmonic Currents and Torque Ripples of Five-Phase Permanent Magnet Synchronous Motors.

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Harmonic Torque Suppression Methods for Single-Phase Open-Circuit Fault-Tolerant Operation of PMSM Considering Third Harmonic BEMF

The Mechanism for Suppressing High-Frequency Vibration of Multiphase Surface Permanent Magnet Motors via PWM Carrier Phase Shifting

Comprehensive Analysis and Reduction of Torque Ripples in Three-Phase Four-Switch Inverter-Fed PMSM Drives Using Space Vector Pulse-Width Modulation

Torque Ripple Suppression Based on Optimal Harmonic Current Injection in Dual Three-Phase PMSMs under Magnetic Saturation.