Erratum To: Influence of Grain Refinement on the Corrosion Behavior of Metallic Materials: A Review

Pan-jun Wang,Li Ma,Xuequn Cheng,Yong Li

DOI: https://doi.org/10.1007/s12613-022-2579-0

2023-01-01

Abstract:The original version of this article unfortunately contained mistakes. Symbols in Table 2 are used incorrectly.

What problem does this paper attempt to address?

Corrigendum for “A Novel Kinase Subverts Aluminium Resistance by Boosting Ornithine Decarboxylase‐dependent Putrescine Biosynthesis”

Xiang P. Liu,Li J. Gao,Ben T. She,Gui X. Li,Yun R. Wu,Ji M. Xu,Zhong J. Ding,Jian F. Ma,Shao J. Zheng

DOI: https://doi.org/10.1111/pce.14419

2022-01-01

Abstract:In the published article, the author names in the byline which originally appeared as “Xiang P. Liu, Li J. Gao, Ben T. She, Gui X. Li, Yun R. Wu, Ji M. Xu, Zhong J. Ding, Jian F. Ma, Shao J. Zheng” have been corrected to “Xiangpei Liu, Lijun Gao, Bentao She, Guixin Li, Yunrong Wu, Jiming Xu, Zhongjie Ding, Jianfeng Ma, Shaojian Zheng” in the byline and the ORCID ID section. We apologize for this error.
Erratum to: Description of full-range strain hardening behavior of steels

Tao Li,Jinyang Zheng,Zhiwei Chen

DOI: https://doi.org/10.1186/s40064-016-2998-3

2016-01-01

SpringerPlus

Abstract:[This corrects the article DOI: 10.1186/s40064-016-2998-3.].
Correction To: Effect of Y2O3 Addition on the Microstructure, Wear Resistance, and Corrosion Behavior of W-4.9Ni-2.1Fe Heavy Alloy

Xuehui Zhang,Shengjian Zhu,Biao Zhang,Tahir Ahmad,Chunming Wang,Liangliang Zhou,Tongxiang Liang,Bin Yang

DOI: https://doi.org/10.1007/s11665-019-04318-2

IF: 2.3

2019-01-01

Journal of Materials Engineering and Performance

Abstract:The figure presented for Fig. 2(d) in this article is not the correct one.
Erratum to “critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery[Int. J. Electrochem. Sci., 11 (2016) 2461-2472]”

Yangang Wang,Xiang Ding,Lihua Huang,Yangling Xu,Yuanhui Zuo,Shifei Kang,Lifeng Cui

DOI: https://doi.org/10.1016/s1452-3981(23)16178-5

IF: 1.541

2016-01-01

International Journal of Electrochemical Science

Abstract:This is an erratum regarding the published article (Int. J. Electrochem. Sci., 11 (2016) 2461- 2472), which has a mistake in the AUTHORS INFORMATION part.
Influence of grain refinement on the corrosion behavior of metallic materials: A review

Pan-jun Wang,Ling-wei Ma,Xue-qun Cheng,Xiao-gang Li

DOI: https://doi.org/10.1007/s12613-021-2308-0

2021-07-01

Abstract:Grain refinement can strengthen the mechanical properties of materials according to the classical Hall-Petch relationship but does not always result in better corrosion resistance. During the past few decades, various techniques have been dedicated to refining grain, along with relevant studies on corrosion behavior, including general corrosion, pitting corrosion, and stress corrosion cracking. However, the fundamental consensus on how grain size influences corrosion behavior has not been reached. This paper reviews existing literature on the beneficial and detrimental effects of grain refinement on corrosion behavior. Moreover, the effects of microstructural changes (i.e., grain boundary, dislocation, texture, residual stress, impurities, and second phase) resulting from grain refinement on corrosion behavior are discussed. The grain refinement not only has an impact on the corrosion performance, but also results in microstructural changes that have a non-negligible effect on corrosion behavior or even outweigh that of grain refinement. Grain size is not the only factor affecting the corrosion behavior of metallic materials; thus, the overall influence of microstructures on corrosion behavior should be understood.
Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

J F Zhou,C Y Liu,K Z He,X X Wei

DOI: https://doi.org/10.1016/j.heliyon.2024.e28814

IF: 3.776

2024-03-30

Heliyon

Abstract:[This corrects the article DOI: 10.1016/j.heliyon.2024.e24428.].
Corrigendum to: Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Jiehui Liu,Hongjun Hu,Yang Liu,Dingfei Zhang,Zhongwen Ou,Yan Zhi

DOI: https://doi.org/10.1515/mt-2023-8002

2023-06-16

Materialpruefung/Materials Testing

Abstract:Corrigendum to: Jiehui Liu, Hongjun Hu, Yang Liu, Dingfei Zhang, Zhongwen Ou and Yan Zhi, "Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61," Materials Testing , vol. 62, no. 4, pp. 395–399, 2020 (https://doi.org/10.3139/120.111476). As Figures 5a and c have already been published in other articles, the authors wish to replace them by the following figures: Worn surface morphology under load 5 N and reciprocating frequency 2 Hz of magnesium alloy made by a) CE process, b) DE process, c) friction coefficients varying with different loads of dry sliding. The authors would like to apologize for any inconvenience caused. © 2023 Walter de Gruyter GmbH, Berlin/Boston
Erratum to: Highly active zigzag-like Pt-Zn alloy nanowires with high-index facets for alcohol electrooxidation

Yanchao Xu,Xiaoqiang Cui,Shuting Wei,Qinghua Zhang,Lin Gu,Fanqi Meng,Jinchang Fan,Weitao Zheng

DOI: https://doi.org/10.1007/s12274-019-2468-7

IF: 9.9

2019-01-01

Nano Research

Abstract:The article Highly active zigzag-like Pt-Zn alloy nanowires with high-index facets for alcohol electrooxidation, written by Xiaoqiang Cui and Weitao Zheng, was erroneously originally published electronically on the publisher’s internet portal (currently SpringerLink) on 6 April 2019 with incomplete Electronic Supplementary Material (ESM), which should contain 16 figures and 3 tables. You will find the complete supplementary material file online linked to this publisher’s erratum. The publisher apologizes to the authors and readers for this mistake.
Correction: Corrigendum: Autophagy-associated alpha-arrestin signaling is required for conidiogenous cell development in Magnaporthe oryzae

Dong, Bo,Xu, Xiaojin,Chen, Guoqing,Zhang, Dandan,Tang, Mingzhi,Xu, Fei,Liu, Xiaohong,Wang, Hua,Zhou, Bo

DOI: https://doi.org/10.1038/srep33939

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Scientific Reports 6: Article number: 30963; published online: 08 August 2016; updated: 30 September 2016 This Article contains a typographical error in the Acknowledgements section. “We would also like to thank Li Xe and Xijiao Song (Zhejiang Academy of Agricultural Sciences, Hangzhou, China) for technical assistance on the confocal microscopic analysis”.
Corrigendum to “Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process” [Mater. Sci. Eng. A 662 (2016) 456–467] (S0921509316303148) (10.1016/j.msea.2016.03.097))

Wang Haibo,Song Guolin,Tang Guoyi

DOI: https://doi.org/10.1016/j.msea.2017.05.119

2017-01-01

Abstract:The authors regret that Fig. 12C is not appearing correctly, and should be replaced with the following: The authors would like to apologise for any inconvenience caused. © 2017
Erratum to: In situ construction of thiol-silver interface for selectively electrocatalytic CO2 reduction

Ying Chen,Feng Hu,Yanan Hao,Yonghan Wang,Yaoyi Xie,Hui Wang,Lijie Yin,Deshuang Yu,Hongchao Yang,Jun Ma,Dan Kai,Linlin Li,Shengjie Peng

DOI: https://doi.org/10.1007/s12274-022-4484-2

IF: 9.9

2022-05-20

Nano Research

Abstract:One funding number in the Acknowledgements section was unfortunately mistakenly used. This error did not affect any of the conclusions from the published paper.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Erratum: Corrigendum: Magnetization Reversal by Out-of-plane Voltage in BiFeO3-based Multiferroic Heterostructures

J. J. Wang,J. M. Hu,Ren-Ci Peng,Y. Gao,Y. Shen,L. Q. Chen,C. W. Nan

DOI: https://doi.org/10.1038/srep21443

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Scientific Reports 5: Article number:10459; published online: 21 May 2015; updated: 23 February 2016 This Article contains a typographical error in a grant number in the Acknowledgements section. “This work was supported by the NSF of China (Grant Nos 11234005, 51332001, 51221291, and 51472140), andthe NSF (Grant No: DMR-1410714, DMR-0820404, and DMR-1210588).
Erratum to “Metal–Insulator Transition of Ge–Sb–Te Superlattice: An Electron Counting Model Study” [Jan 18 140-146]

Nian-Ke Chen,Xian-Bin Li,Xue-Peng Wang,Sheng-Yi Xie,Wei Quan Tian,Shengbai Zhang,Hong-Bo Sun

DOI: https://doi.org/10.1109/TNANO.2018.2823098

2018-01-01

IEEE Transactions on Nanotechnology

Abstract:Presents corrections to the paper, “Metal–insulator transition ofGe–Sb–Te superlattice: An electron counting model study,” (Chen, N.-K.), IEEE Trans. Nanotechnol., vol. 17, no. 1, pp. 140–146, Jan. 2018.
Correction: Influence of microstructure evolution on the discharge properties of the Al–Mg–Sn–Ga–In anode for Al–air batteries

Xuehong Xu,Jin Zhang,Wei Jiang,Yunlai Deng

DOI: https://doi.org/10.1039/d4ta90145b

IF: 11.9

2024-08-30

Journal of Materials Chemistry A

Abstract:Correction for 'Influence of microstructure evolution on the discharge properties of the Al–Mg–Sn–Ga–In anode for Al–air batteries' by Xuehong Xu et al. , J. Mater. Chem. A , 2024, 12 , 20469–20481, https://doi.org/10.1039/D4TA03381G.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))

Xiaoming Bai,Miguel A. Bessa,António R. Melro,Pedro P. Camanho,Licheng Guo,Wing Kam Liu

DOI: https://doi.org/10.1016/j.compstruct.2016.05.081

IF: 6.3

2016-01-01

Composite Structures

Abstract:The authors regret to inform that one of the modifications proposed in the article “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” [1] was found to be unnecessary: the paraboloid yield criterion is sufficient to describe the shear behavior of the epoxy matrix considered (Epoxy 3501-6). The authors recently noted that the experimental work [2] used to validate the pure matrix response considered engineering shear strain instead of its tensorial counter-part, which caused the apparent inconsistency with the paraboloid yield criterion.
Erratum To: Editorial

Chang-Jiu Li,Seiji Kuroda,Masahiro Fukumoto,Khiam Aik Khor,Changhee Lee,You Wang

DOI: https://doi.org/10.1007/s11666-010-9581-1

IF: 2.839

2010-01-01

Journal of Thermal Spray Technology

Abstract:Chang-Jiu Li, Xi an Jiaotong University, Xi an, Shaanxi, China; Seiji Kuroda, National Institute of Materials Science, Tsukuba, Ibaraki, Japan; Masahiro Fukumoto, Toyohashi University of Technology, Toyohashi, Aichi, Japan; Khiam Aik Khor, Nanyang Technological University, Singapore, Singapore; Changhee Lee, Hanyang University, Seoul, Korea; and You Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China. JTTEE5 19:1148 Erratum DOI: 10.1007/s11666-010-9581-1 1059-9630/$19.00 ASM International
Correction: The corrosion behaviors of multilayer diamond-like carbon coatings: influence of deposition periods and corrosive medium

Mingjun Cui,Jibin Pu,Guangan Zhang,Liping Wang,Qunji Xue

DOI: https://doi.org/10.1039/d1ra90166d

IF: 4.036

2021-01-01

RSC Advances

Abstract:Correction for ‘The corrosion behaviors of multilayer diamond-like carbon coatings: influence of deposition periods and corrosive medium’ by Mingjun Cui et al. , RSC Adv. , 2016, 6 , 28570–28578, DOI: 10.1039/C6RA05527C.

chemistry, multidisciplinary
Correction: Tang, L. et al., Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy. Materials 2020, 13, 3858

Luyao Tang,Jiangkun Fan,Hongchao Kou,Bin Tang,Jinshan Li

DOI: https://doi.org/10.3390/ma13235364

IF: 3.4

2020-11-26

Materials

Abstract:The author wishes to make the following correction to this paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Correction: Tamadon et al. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423

Abbas Tamadon,Dirk J. Pons,Kamil Sued,Don Clucas

DOI: https://doi.org/10.3390/met14020240

IF: 2.695

2024-02-16

Metals

Abstract:Metals, Vol. 14, Pages 240: Correction: Tamadon et al. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423 Metals doi: 10.3390/met14020240 Authors: Abbas Tamadon Dirk J. Pons Kamil Sued Don Clucas In the original publication [...]

materials science, multidisciplinary,metallurgy & metallurgical engineering
Correction To: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Shaolou Wei,Lujun Huang,Xinting Li,Yang Jiao,Wei Ren,Lin Geng

DOI: https://doi.org/10.1007/s11661-019-05606-1

2020-01-01

Metallurgical and Materials Transactions A

Abstract:In the original article, there is an error in Figure 1. The unit of Specific strength should be MPa/(g•cm-3). Following is the corrected figure:

Erratum To: Influence of Grain Refinement on the Corrosion Behavior of Metallic Materials: A Review

Corrigendum for “A Novel Kinase Subverts Aluminium Resistance by Boosting Ornithine Decarboxylase‐dependent Putrescine Biosynthesis”

Erratum to: Description of full-range strain hardening behavior of steels

Correction To: Effect of Y2O3 Addition on the Microstructure, Wear Resistance, and Corrosion Behavior of W-4.9Ni-2.1Fe Heavy Alloy

Erratum to “critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery[Int. J. Electrochem. Sci., 11 (2016) 2461-2472]”

Influence of grain refinement on the corrosion behavior of metallic materials: A review

Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

Corrigendum to: Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Erratum to: Highly active zigzag-like Pt-Zn alloy nanowires with high-index facets for alcohol electrooxidation

Correction: Corrigendum: Autophagy-associated alpha-arrestin signaling is required for conidiogenous cell development in Magnaporthe oryzae

Corrigendum to “Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process” [Mater. Sci. Eng. A 662 (2016) 456–467] (S0921509316303148) (10.1016/j.msea.2016.03.097))

Erratum to: In situ construction of thiol-silver interface for selectively electrocatalytic CO2 reduction

Erratum: Corrigendum: Magnetization Reversal by Out-of-plane Voltage in BiFeO3-based Multiferroic Heterostructures

Erratum to “Metal–Insulator Transition of Ge–Sb–Te Superlattice: An Electron Counting Model Study” [Jan 18 140-146]

Correction: Influence of microstructure evolution on the discharge properties of the Al–Mg–Sn–Ga–In anode for Al–air batteries

Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))

Erratum To: Editorial

Correction: The corrosion behaviors of multilayer diamond-like carbon coatings: influence of deposition periods and corrosive medium

Correction: Tang, L. et al., Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy. Materials 2020, 13, 3858

Correction: Tamadon et al. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423

Correction To: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures