Abstract:Nickel/yttria-stabilized zirconia (YSZ) composites are the most commonly used fuel electrodes for solid oxide cells. While microstructural changes of Ni/YSZ during operational conditions have been thoroughly investigated, there is limited knowledge regarding Ni/YSZ surface chemistry under working conditions. In this study, we examine the interaction between Ni/YSZ electrodes and water vapor under open circuit and polarization conditions, utilizing near ambient pressure soft and hard X-ray photoelectron spectroscopies. Miniature cells with conventional porous Ni/YSZ composite cermet cathodes were modified to facilitate the direct spectroscopic observation of the functional electrode's areas close to the interface with the YSZ electrolyte. The results highlight dynamic changes in the oxidation state and composition of Ni/YSZ under H2 and H2O atmospheres. We also quantify the accumulation of impurities on the electrode surface. Through adjustments in the pretreatment of the cell, the correlation between the nickel surface oxidation state and the cell's electrochemical performance during H2O electroreduction is established. It is unequivocally shown that nickel surface oxidation in H2O electrolysis favors NiO over Ni(OH)x, providing critical insights into the mechanism of Ni-phase redistribution within the electrode during long-term operation. Depth-dependent photoemission measurements, combined with theoretical quantitative simulations, reveal that NiO and Ni phases are uniformly mixed on the surface during H2O electrolysis. This differs from the conventional expectation of a NiO-shell/Ni-core configuration in gas phase oxidation. These findings provide crucial insights into the surface chemistry of Ni/YSZ electrodes under conditions relevant to H2O electrolysis, elucidating their impact on the electrochemical performance of the cell.

Studying the Sulfur Poisoning Mechanism of Solid Oxide Fuel Cells by Means of Patterned Nickel/Yttrium-Stabilized Zirconia Electrodes

Analysis of Thermal Stress in a Solid Oxide Fuel Cell Due to the Sulfur Poisoning Interface of the Electrolyte and Cathode

A Novel Method to Purposely Modify the Anode/Electrolyte Interface in Solid Oxide Fuel Cells

Carbon Deposition on Patterned Nickel/yttria Stabilized Zirconia Electrodes for Solid Oxide Fuel Cell/solid Oxide Electrolysis Cell Modes

Role of Initial Microstructure on Nickel-Ysz Cathode Degradation in Solid Oxide Electrolysis Cells

Carbon Monoxide/carbon Dioxide Electrochemical Conversion on Patterned Nickel Electrodes Operating in Fuel Cell and Electrolysis Cell Modes

Impact of yttria-stabilized zirconia contents in nickel cermet anodes for intermediate temperature-operated syngas-fueled thin film solid oxide fuel cells

Ni migration of Ni-YSZ electrode in solid oxide electrolysis cell: An integrated model study

Activation of H(2) oxidation at sulphur-exposed Ni surfaces under low temperature SOFC conditions

Electrochemical characteristics of patterned nickel electrodes on single-crystal YSZ in CO/CO2 atmospheres for operating in fuel cell/electrolysis cell modes

Unveiling Key Interface Characteristics of Ni/Yttria-Stabilized Zirconia Solid Oxide Cell Electrodes in H2O Electroreduction Using Operando X-ray Photoelectron Spectroscopy

Microstructure Evolution Analysis of Ni/YSZ Cermet Electrode using Cross-Sectional Model Cells

Sulfur poisoning of La(Ni0.6Fe0.4)O3 cathode material for solid oxide fuel cells

Importance of Oxygen Spillover for Fuel Oxidation on Ni/YSZ Anodes in Solid Oxide Fuel Cells.

Degradation of Ni-YSZ Electrodes in Solid Oxide Cells: Impact of Polarization and Initial Microstructure on the Ni Evolution

Rational Design of Perovskite-based Anode with Decent Activity for Hydrogen Electro-oxidation and Beneficial Effect of Sulfur for Promoting Power Generation in Solid Oxide Fuel Cells.

Elementary Reaction Kinetic Model of an Anode-Supported Syngas Fueled Solid Oxide Fuel Cell Considering the Carbon Deposition Effect

Review of factors affecting the performance degradation of Ni-YSZ fuel electrodes in solid oxide electrolyzer cells

Sulphur poisoning of solid oxide electrolysis cell anodes

Anodic polarization creates an electrocatalytically active Ni anode/electrolyte interface and mitigates the coarsening of Ni phase in SOFC

Rational Design of a Water‐Storable Hierarchical Architecture Decorated with Amorphous Barium Oxide and Nickel Nanoparticles As a Solid Oxide Fuel Cell Anode with Excellent Sulfur Tolerance