Abstract:Backgrounds: Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Methods: Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. Results: An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive to real time particle concentration and size distribution. Averaged particle concentration over 24-h period will inevitably misrepresent the sensible information critical for realistic inhalation risk assessment. Conclusions: Particle size distribution carries very important information in determining human airway dosimetry. A pure number or mass concentration recommendation on the exposure limit at workplace is insufficient. A particle size distribution, together with the deposition equations, is critical to recognize the actual exposure risks. In addition, human airway dosimetry in number, mass and surface area varies significantly. A complete inhalation risk assessment requires the knowledge of toxicity mechanisms in response to each individual metric. Further improvements in these areas are needed.

ASSESSING THE RELATIVE IMPORTANCE OF MUCOSAL EXPOSURE AND INHALATION EXPOSURE TO AIRBORNE PARTICLES

Measuring the Administered Dose of Particles on the Facial Mucosa of a Realistic Human Model

A simple air-liquid interface exposure system for exposing cultured human 3D epidermis and cornea to PM2.5 collected through cyclonic separation

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop

Numerical Investigation of the Lower Airway Exposure to Indoor Particulate Contaminants

Combining analytical techniques to assess the translocation of diesel particles across an alveolar tissue barrier in vitro

A numerical study of the effect of breathing mode and exposure conditions on the particle inhalation and deposition

A Numerical Study on Firefighter Nasal Airway Dosimetry of Smoke Particles from a Realistic Composite Deck Fire

Individual Exposure to Microplastics Through the Inhalation Route: Comparison of Microplastics in Inhaled Indoor Aerosol and Exhaled Breath Air

55 Investigating the co-Exposure of Micro(nano)Plastics and Indoor/Outdoor Particulate Matter Using an Alveolar BarrierIn Vitro Model

UNCERTAINTIES IN DOSES DUE TO THE NUMBER OF AEROSOL PARTICLES: STUDY ON 239PuO2 USING DEFAULT PARAMETERS FOR WORKERS

The Influence of Aerosol Density and Shape Factor on the Assessment of Internal Exposure to 239Pu

Comparative influences of dermal and inhalational routes of exposure on hazards of cleaning product ingredients among mammalian model organisms

Assessment of personal deposited dose of bioaerosols and particles in a wastewater treatment plant facility

New Approach Methodology for Assessing Inhalation Risks of a Contact Respiratory Cytotoxicant: Computational Fluid Dynamics-Based Aerosol Dosimetry Modeling for Cross-Species and In Vitro Comparisons

Inhalation Health Risk Assessment for the Human Tracheobronchial Tree under PM Exposure in a Bus Stop Scene

Dry deposition of pollutant and marker particles onto live mouse airway surfaces enhances monitoring of individual particle mucociliary transit behaviour

Applicability of a Modified MCE Filter Method with Button Inhalable Sampler for Monitoring Personal Bioaerosol Inhalation Exposure

Interaction of diesel exhaust particulate matter with mucins in simulated saliva fluids: Bioaccessibility of heavy metals and potential health risks

In vitro toxicoproteomic analysis of A549 human lung epithelial cells exposed to urban air particulate matter and its water-soluble and insoluble fractions

The pro-inflammatory effects of low-toxicity low-solubility particles, nanoparticles and fine particles, on epithelial cells in vitro: the role of surface area