Abstract:Backgrounds: Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Methods: Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. Results: An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive to real time particle concentration and size distribution. Averaged particle concentration over 24-h period will inevitably misrepresent the sensible information critical for realistic inhalation risk assessment. Conclusions: Particle size distribution carries very important information in determining human airway dosimetry. A pure number or mass concentration recommendation on the exposure limit at workplace is insufficient. A particle size distribution, together with the deposition equations, is critical to recognize the actual exposure risks. In addition, human airway dosimetry in number, mass and surface area varies significantly. A complete inhalation risk assessment requires the knowledge of toxicity mechanisms in response to each individual metric. Further improvements in these areas are needed.

A numerical study of the effect of breathing mode and exposure conditions on the particle inhalation and deposition

Numerical Investigation of the Lower Airway Exposure to Indoor Particulate Contaminants

Size-segregated Deposition of Atmospheric Elemental Carbon (EC) in the Human Respiratory System: A Case Study of the Pearl River Delta, China.

Numerical Investigation of Airflow, Heat Transfer and Particle Deposition for Oral Breathing in a Realistic Human Upper Airway Model.

Numerical study on the deposition distribution and mechanism of inhaled drug particles in various regions of the realistic inhaler-airway model

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop

Investigation of Ultrafine Particle Deposition in Human Airway to the 9th Generation of Bronchial Tubes Using Computational Fluid and Particle Dynamics

Numerical simulation on exhaled aerosol transmission based on realistic oral-nasal structures and temperature distribution

Modeled Deposition of Fine Particles in Human Airway in Beijing, China

Research on the deposition efficiency of nanoparticles in human airways

Micron particle deposition in a tracheobronchial airway model under different breathing conditions

Study on the transport and deposition of micron-sized particles with different densities in the coal mine environment in miners

Inhalation Airflow and Ventilation Efficiency in Subject-Specific Human Upper Airways

Effect of airflow rate on droplet deposition of an impinging-jet inhaler in the human respiratory tract

A Numerical Study on Firefighter Nasal Airway Dosimetry of Smoke Particles from a Realistic Composite Deck Fire

Numerical Simulation of the Effect of Respiratory Cycle on Inhalable Particle Deposition in Alveolus

Research on deposition characteristics of on radioactive aerosols in a realistic human model

Modeling micro-particle deposition in human upper respiratory tract under steady inhalation

Numerical and Experimental Analysis of Drug Inhalation in Realistic Human Upper Airway Model

A review on numerical studies of airflow dynamics and particle deposition in human respiratory system

Numerical Analysis of Nasal Flow Characteristics with Microparticles