Abstract:Backgrounds: Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Methods: Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. Results: An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive to real time particle concentration and size distribution. Averaged particle concentration over 24-h period will inevitably misrepresent the sensible information critical for realistic inhalation risk assessment. Conclusions: Particle size distribution carries very important information in determining human airway dosimetry. A pure number or mass concentration recommendation on the exposure limit at workplace is insufficient. A particle size distribution, together with the deposition equations, is critical to recognize the actual exposure risks. In addition, human airway dosimetry in number, mass and surface area varies significantly. A complete inhalation risk assessment requires the knowledge of toxicity mechanisms in response to each individual metric. Further improvements in these areas are needed.

Numerical Investigation of the Lower Airway Exposure to Indoor Particulate Contaminants

Deposition of Droplets from the Trachea or Bronchus in the Respiratory Tract During Exhalation: A Steady-State Numerical Investigation

A numerical study of the effect of breathing mode and exposure conditions on the particle inhalation and deposition

Investigation of Ultrafine Particle Deposition in Human Airway to the 9th Generation of Bronchial Tubes Using Computational Fluid and Particle Dynamics

Development of multi-generation lower respiratory tract model and insights into the transport and deposition characteristics of inhalable particles

Modeled Deposition of Fine Particles in Human Airway in Beijing, China

Aerosol deposition and airflow dynamics in healthy and asthmatic human airways during inhalation

Numerical Simulation of Inhaled Aerosol Particle Deposition Within 3d Realistic Human Upper Respiratory Tract

Research on the deposition efficiency of nanoparticles in human airways

Numerical Investigation of Airflow, Heat Transfer and Particle Deposition for Oral Breathing in a Realistic Human Upper Airway Model.

Study on Airflow and Inhaled Particle Deposition Within Realistic Human Upper Respiratory Tract

Numerical study on the deposition distribution and mechanism of inhaled drug particles in various regions of the realistic inhaler-airway model

Deposition of Indoor Airborne Particles onto Human Body Surfaces: A Modeling Analysis and Manikin-Based Experimental Study

Study on the transport and deposition of micron-sized particles with different densities in the coal mine environment in miners

Experiment and numerical investigation of inhalable particles and indoor environment with ventilation system

Modeling Regional Deposited Dose of Submicron Aerosol Particles.

Investigation of inter-subject variation in ultrafine particle deposition across human nasal airways: A study involving children, adults, and the elderly

Deposition and cellular interaction of cancer-inducing particles in the human respiratory tract: Theoretical approaches and experimental data

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop

Numerical simulation on exhaled aerosol transmission based on realistic oral-nasal structures and temperature distribution

Total and regional microfiber transport characterization in a 15th - Generation human respiratory airway