Abstract:For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes' intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes' intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the Zw-axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.

The Method of Impact Point Location Based on Planar Double Disk Array

Error impact analysis and experimental research for absolute testing of spherical surfaces

Assembly Accuracy Analysis for Small Components with A Planar Surface in Large-Scale Metrology

Numerical simulation of the disk fragment impacting resistance of plate target

An Impact Location Algorithm for Spacecraft Stiffened Structure Based on Posterior Possibility Correlation

A Method for Robot Placement Optimization Based on Two-Dimensional Manifold in Joint Space.

Real-time Motion-Induced Error Reduction for Phase-Shifting Profilometry with Projection Points Tracking Method

Error Analysis and Optimization of Structural Parameters of Spatial Coordinate Testing System Based on Position-Sensitive Detector

A Method for Estimating Impact Location of Loose Part Using HHT

Impact point location based on seismic wave analysis

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Loose parts location analysis based on two dimensional optimization

Ballistic Fitting Impact Point Prediction Based on Improved Crayfish Optimization Algorithm

A Method to Locate Firing Points by Fusing Double CCD and GIS

A Fast Flatness Deviation Evaluation Algorithm for Point Cloud Data

Light Curtain Target Point Coordinate Measuring Method

Multi-Source Impact Position Identification Method for Metal Plates Based on Fiber Bragg Grating

Investigation on High-Velocity Impact of Micron Particles Using Material Point Method

Research on Accurate Impact Point Prediction Methods of Heavy Rocket Debris

Probability based impact localization in plate structures using an error index

Spectral approximation for compact operators