Abstract:Using a space robot to capture a non-cooperative spacecraft with high-speed rotation is significantly challenging since any collision generated during capturing will have great impact on both. To reduce the risk in capturing operations, it is crucial to slow down the rotation velocity of the target before capturing. Hence, this paper studies a collision control strategy for using a robotic arm to detumble a non-cooperative spacecraft. The goal of this strategy is to maintain contact between the robot and the target and to apply continuous detumbling force on the target to slow down its rotational motion. To achieve that, first the mechanism analysis of the two balls for a central collision scenario is performed. Then an overdamping control method is proposed to avoid the separation of the balls after the central collision based on the overdamping property of the mass-spring-damper system, the effectiveness of which is validated theoretically. Finally, to use this overdamping control method in the detumbling missions of space robots, a position-based overdamping control strategy is introduced. In this strategy, the relative dynamic behavior between the robotic arm tip and the contact surface of the target during detumbling is approximated to that of a mass-spring-damper system. Owing to the proposed overdamping control method, the contact between the robot and the target can be maintained, and the space robot can apply continuous control torque to slow down the rotational velocity of the target. Numerical simulations are performed to demonstrate the validity of the proposed control strategy.

An Optimal Nutation Reduction Method for Contact De-Tumbling of Satellites

Prospects of De-Tumbling Large Space Debris Using a Two-Satellite Electromagnetic Formation

A Composite Optimization Method for Separation Parameters of Large-Eccentricity Pico-Satellites

An Optimization Method of Separation Parameters for Pico-Satellite by Minimizing External Moment

Orbit-attitude coupled dynamics modeling and adaptive sliding mode control for detumbling large space debris

Active Detumbling Technology for High Dynamic Non-Cooperative Space Targets

Adaptive Robot Detumbling of a Non-Rigid Satellite

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Adaptive optimal concurrent control for detumbling space non-cooperative target via multipoint repeated contact

Active Detumbling Technology for Noncooperative Space Target with Energy Dissipation

An Improved Uncooperative Space Target De-tumbling Method Using Electromagnetic De-tumbling Devices with AC Excitation

Prospects of Using a Permanent Magnetic End Effector to Despin and Detumble an Uncooperative Target

Dynamic Modeling and Analysis of Satellite Detumbling Using a Brush Type Contactor Based on Flexible Multibody Dynamics

Detumbling a Non-Cooperative Tumbling Target Using a Low-Thrust Device

Configuration Optimization for Free-Floating Space Robot Capturing Tumbling Target

Dynamics and Control for Contactless Interaction Between Spacecraft and Tumbling Debris

Optimal detumbling guidance and control of plasma plume for tumbling spacecraft

Impedance Control For Stabilizing The Coupled System During Tumbling Target Capturing

A collision control strategy for detumbling a non-cooperative spacecraft by a robotic arm

Trajectory Planning and Coordination Control of a Space Robot for Detumbling a Flexible Tumbling Target in Post-Capture Phase

A High-Order Disturbance Nutation/Wobble Control for Unbalanced Spinning Satellites