Abstract:Using a space robot to capture a non-cooperative spacecraft with high-speed rotation is significantly challenging since any collision generated during capturing will have great impact on both. To reduce the risk in capturing operations, it is crucial to slow down the rotation velocity of the target before capturing. Hence, this paper studies a collision control strategy for using a robotic arm to detumble a non-cooperative spacecraft. The goal of this strategy is to maintain contact between the robot and the target and to apply continuous detumbling force on the target to slow down its rotational motion. To achieve that, first the mechanism analysis of the two balls for a central collision scenario is performed. Then an overdamping control method is proposed to avoid the separation of the balls after the central collision based on the overdamping property of the mass-spring-damper system, the effectiveness of which is validated theoretically. Finally, to use this overdamping control method in the detumbling missions of space robots, a position-based overdamping control strategy is introduced. In this strategy, the relative dynamic behavior between the robotic arm tip and the contact surface of the target during detumbling is approximated to that of a mass-spring-damper system. Owing to the proposed overdamping control method, the contact between the robot and the target can be maintained, and the space robot can apply continuous control torque to slow down the rotational velocity of the target. Numerical simulations are performed to demonstrate the validity of the proposed control strategy.

Dynamic Modeling and Analysis of Satellite Detumbling Using a Brush Type Contactor Based on Flexible Multibody Dynamics

Orbit-attitude coupled dynamics modeling and adaptive sliding mode control for detumbling large space debris

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Active Detumbling Technology for High Dynamic Non-Cooperative Space Targets

Integrated Position and Attitude Stabilization of Spacecraft for Eddy Brake Based Detumbling

Triaxial Contact Detumbling of Large-scale Space Debris

Active Detumbling Technology for Noncooperative Space Target with Energy Dissipation

Integrated Position and Attitude Adaptive Stabilization of Service Spacecraft for the Detumbling of Space Debris via Eddy Brake

An Improved Uncooperative Space Target De-tumbling Method Using Electromagnetic De-tumbling Devices with AC Excitation

PCB-integrated embedded planar magnetorquers for small satellites intelligent detumbling

Dynamics and Control for Contactless Interaction Between Spacecraft and Tumbling Debris

Detumbling a Flexible Tumbling Target Using a Space Robot in Post-capture Phase

Impedance Control For Stabilizing The Coupled System During Tumbling Target Capturing

A collision control strategy for detumbling a non-cooperative spacecraft by a robotic arm

Dynamics modeling and model selection of space debris removal via the Tethered Space Robot

Trajectory Planning and Coordination Control of a Space Robot for Detumbling a Flexible Tumbling Target in Post-Capture Phase

Kinematic System Design of the Pico-Satellite Separation Mechanism

DYNAMICS MODELLING AND FAULT TOLERANT CONTROL OF A 6-DOF SPACE ROBOT WITH FLEXIBLE PANELS

Dynamic Modelling and Analysis for a Flexible Brush Sampling Mechanism

Building a Better B-Dot: Fast Detumbling with Non-Monotonic Lyapunov Functions

Prospects of De-Tumbling Large Space Debris Using a Two-Satellite Electromagnetic Formation