Abstract:Interface engineering has become a critical process to fabricate efficient and stable planar heterojunction perovskite solar cells (PSCs), as the degradation of perovskite, hysteresis, and photo and thermal instability can all be triggered by the defective interfaces of PSCs. Herein, two fullerene derivatives, NMPPF and NMTTF, have been designed as interlayers between the MAPbI3 and TiO2 electron transport layer. The thiophene terminals of NMTTF have been found to effectively passivate the uncoordinated Pb2+ of perovskite, reducing trap density and charge recombination of PSCs as well as facilitating charge transport at the perovskite and TiO2 interface. Compared to the reference MAPbI3 PSC with a maximum power conversion efficiency (PCEmax) of 18.7% and serious hysteresis (ΔPCE = 7.2%), PSCs incorporating NMTTF achieve a PCEmax of 19.5% with minor hysteresis (ΔPCE = 1.2%) and outperform the performance of NMPPF (PCEmax = 18.0%, ΔPCE = 2.3%) and PC61BM (PCEmax = 18.9%, ΔPCE = 1.4%) modified PSCs. Unencapsulated PSCs adopting these NMPPF and NMTTF interlayers also exhibit good storage stability, maintaining 80% of their initial PCEs after storing in ambient for 30 days. This work demonstrates that the thiophene moiety can be an efficient defect passivation unit to design new fullerene molecules for interfacial engineering of PSCs with high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01491?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01491</a>.Synthesis of NMPPF/NMTTF fullerene molecules, PL and UV–vis spectra, dark J–V curves to calculate mobility and conductivity, EQE of PSCs without and with an NMPPF or NMTTF interlayer, water contact angle measurements, PCE evolution of unencapsulated PSCs in ambient condition, and Nyquist plots of PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01491/suppl_file/ae0c01491_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fullerene Modification of WO3 Electron Transport Layer Toward High‐efficiency MA‐free Perovskite Solar Cells with Eliminated Light‐soaking Effect

Efficient and Stable Wide‐Bandgap Methylammonium‐Free Perovskite Solar Cells by Simultaneous Passivation and Cleaning with Diamine

One‐Stone‐For‐Three‐Birds Strategy Using a Fullerene Modifier for Efficient and Stable Inverted Perovskite Solar Cells

Enhanced Performance and Light Soaking Stability of Planar Perovskite Solar Cells Using an Amine-Based Fullerene Interfacial Modifier

Low‐Temperature Solution‐Processed ZnO Electron Transport Layer for Highly Efficient and Stable Planar Perovskite Solar Cells with Efficiency over 20%

Efficient MA-free Pb-Sn alloyed low-bandgap perovskite solar cells via surface passivation

Thiophene Terminated Fullerene Derivatives for Interfacial Modification toward High Efficiency MAPbI 3 Perovskite Solar Cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

Reduced defects and enhanced Vbi in perovskite absorbers through synergetic passivating effect using 4-methoxyphenylacetic acid

Efficient and Stable Inverted Perovskite Solar Cells Enabled by a Fullerene‐Based Hole Transport Molecule

Unravelling the Mechanism of Ionic Fullerene Passivation for Efficient and Stable Methylammonium-Free Perovskite Solar Cells

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Passivation functionalized phenothiazine-based hole transport material for highly efficient perovskite solar cell with efficiency exceeding 22%

Dimensionality-Controlled Surface Passivation for Enhancing Performance and Stability of Perovskite Solar Cells via Triethylenetetramine Vapor

Ammonium salt and halogen co-functionalized fullerene for interfacial modification layer of inverted perovskite solar cells

Interface Modification by Ammonium Sulfamate for High‐Efficiency and Stable Perovskite Solar Cells

Reconfiguration toward Self‐Assembled Monolayer Passivation for High‐Performance Perovskite Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

High Efficiency Perovskite Solar Cells with PTAA Hole Transport Layer enabled by PMMA:F4-TCNQ Buried Interface Layer

Fullerene Polymer Complex Inducing Dipole Electric Field for Stable Perovskite Solar Cells