Abstract:Interface engineering has become a critical process to fabricate efficient and stable planar heterojunction perovskite solar cells (PSCs), as the degradation of perovskite, hysteresis, and photo and thermal instability can all be triggered by the defective interfaces of PSCs. Herein, two fullerene derivatives, NMPPF and NMTTF, have been designed as interlayers between the MAPbI3 and TiO2 electron transport layer. The thiophene terminals of NMTTF have been found to effectively passivate the uncoordinated Pb2+ of perovskite, reducing trap density and charge recombination of PSCs as well as facilitating charge transport at the perovskite and TiO2 interface. Compared to the reference MAPbI3 PSC with a maximum power conversion efficiency (PCEmax) of 18.7% and serious hysteresis (ΔPCE = 7.2%), PSCs incorporating NMTTF achieve a PCEmax of 19.5% with minor hysteresis (ΔPCE = 1.2%) and outperform the performance of NMPPF (PCEmax = 18.0%, ΔPCE = 2.3%) and PC61BM (PCEmax = 18.9%, ΔPCE = 1.4%) modified PSCs. Unencapsulated PSCs adopting these NMPPF and NMTTF interlayers also exhibit good storage stability, maintaining 80% of their initial PCEs after storing in ambient for 30 days. This work demonstrates that the thiophene moiety can be an efficient defect passivation unit to design new fullerene molecules for interfacial engineering of PSCs with high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01491?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01491</a>.Synthesis of NMPPF/NMTTF fullerene molecules, PL and UV–vis spectra, dark J–V curves to calculate mobility and conductivity, EQE of PSCs without and with an NMPPF or NMTTF interlayer, water contact angle measurements, PCE evolution of unencapsulated PSCs in ambient condition, and Nyquist plots of PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01491/suppl_file/ae0c01491_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

One‐Stone‐For‐Three‐Birds Strategy Using a Fullerene Modifier for Efficient and Stable Inverted Perovskite Solar Cells

Efficient and Stable Inverted Perovskite Solar Cells Enabled by a Fullerene‐Based Hole Transport Molecule

Enhancing Efficiency and Stability of Inverted Perovskite Solar Cells through Solution‐Processed and Structurally Ordered Fullerene

Interface Engineering of TiO2/perovskite Interface Via Fullerene Derivatives for High Performance Planar Perovskite Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Efficient and Stable Perovskite/Silicon Tandem Solar Cells Modulated with Triple‐Functional Passivator

Improving the Performance of Low-Temperature Planar Perovskite Solar Cells by Adding Functional Fullerene End-Capped Polyethylene Glycol Derivatives

Cross‐Linkable Fullerene Electron Transport Layer with Internal Encapsulation Capability for Efficient and Stable Inverted Perovskite Solar Cells

Fullerene Modification of WO3 Electron Transport Layer Toward High‐efficiency MA‐free Perovskite Solar Cells with Eliminated Light‐soaking Effect

Enhanced Performance and Light Soaking Stability of Planar Perovskite Solar Cells Using an Amine-Based Fullerene Interfacial Modifier

Two birds with one stone: SmCl3 modified TiO2/perovskite interface to enhance the performance of carbon-based perovskite solar cell

Textured Perovskite/Silicon Tandem Solar Cells Achieving Over 30% Efficiency Promoted by 4-Fluorobenzylamine Hydroiodide

Elucidating the Roles of TiCl4 and PCBM Fullerene Treatment on TiO2 Electron Transporting Layer for Highly Efficient Planar Perovskite Solar Cells

One‐Stone‐for‐Multiple‐Birds Additive Strategy for Highly Efficient and Stable Carbon‐Based Hole‐Transport‐Layer‐Free CsPbI2Br Solar Cells

A ternary organic electron transport layer for efficient and photostable perovskite solar cells under full spectrum illumination

Thiophene Terminated Fullerene Derivatives for Interfacial Modification toward High Efficiency MAPbI 3 Perovskite Solar Cells

One-stone-for-two-birds strategy to attain beyond 25% perovskite solar cells

Fullerene Polymer Complex Inducing Dipole Electric Field for Stable Perovskite Solar Cells

C 60 -CN: A bifunctional interface modification material for perovskite solar cells

Multifunctional Buffer Layer Engineering for Efficient and Stable Wide‐Bandgap Perovskite and Perovskite/Silicon Tandem Solar Cells

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%