Abstract:<p>Bipolar plates made of ultra-thin titanium sheet metals feature high corrosion resistance, electrical conductivity and strength-weight ratio. They are considered as a satisfying candidate for the proton exchange membrane fuel cell (PEMFC) used in vehicles. Bipolar plates have fine and complex sub-millimeter channel features which are employed to guide the flow of hydrogen, oxygen and cooling medium, to support the reaction space, to provide sealing structure, etc. Stamping process is an efficient method to fabricate those micro features with high precision and efficiency. However, the aspect ratio of those micro features is limited by the low forming limit of titanium sheet metals. Improving the aspect ratio of metallic bipolar plates could facilitate the uniform heat and mass transfer and further improve the efficiency and performance of PEMFC. Hence a challenging issue for the stamping process of bipolar plates is how to further improve the limit aspect ratio after forming. The multistage forming process is an efficient method to increase the ultimate forming depth and the accuracy by reducing the deformation localization tendency. This work aims to investigate the applicability of that process in fabricating high-aspect-ratio micro-channels on titanium sheet metals. Single stage forming experiments of the micro channels featured with fillet radius of 0.15 mm are first conducted. It is found that the ultimate forming depth of the channels parallel to the rolling direction is 12.67% higher than in the transverse direction. Furthermore, a series of punches and dies with three different fillet radii are employed in the multistage forming process. The ultimate depth of formed channels is revealed to increase from 438.1 to 621.0 μm, i.e. the aspect ratio from 0.46 to 0.67, comparing to the single stage forming process. Hence titanium bipolar plates with a higher aspect ratio could be achieved by utilizing the presented method. The contact resistances of the samples fabricated via single and three-stage forming were further tested to find out that the samples with a higher aspect ratio formed in a three-stage manner have an evident lower contact resistance.</p>

Improving Formability of Titanium Bipolar Plate via Hot Stamping

A Novel Multistage Forming Process with Intermediate Annealing for PEMFC Titanium Bipolar Plates with Fine Flow Channels

Manufacturing of Titanium Bipolar Plates Using Warm Stamping Process

Fabrication of micro channels for titanium PEMFC bipolar plates by multistage forming process

Hot stamping of ultra-thin stainless steel sheets for bipolar plates

Investigation on Three-Stage Stamping of Micro-Channels with Titanium Ultra-Thin Sheet Used for PEM Fuel Cell Bipolar Plates

Optimal Design of Stamping Process for Fabrication of Titanium Bipolar Plates Using the Integration of Finite Element and Response Surface Methods

Simulation optimization and experimental research on three-stage stamping of micro-channels with titanium ultra-thin sheet used for PEM fuel cell bipolar plates

Ultrasonic Vibration-Assisted Stamping of Serpentine Micro-Channel for Titanium Bipolar Plates Used in Proton-Exchange Membrane Fuel Cell

Forming of Ultra-Thin Titanium Sheets with Intermediate Electropulsing Treatment

Forming of Large Scale Bipolar Plates for High Power Fuel Cell Stacks

Investigation into the Three-Stage Formation of Micro-Channels with Ultra-Thin Titanium Sheets Used for Proton-Exchange Membrane Fuel Cell Bipolar Plates

Hybrid forming process combining electromagnetic and quasi-static forming of ultra-thin titanium sheets: Formability and mechanism

Flow-Channel Shape Design of Stamped Bipolar Plate for PEM Fuel Cell by Micro-Forming Simulation

Stainless steel bipolar plates for proton exchange membrane fuel cells: Materials, flow channel design and forming processes

Fabrication of titanium bipolar plates for proton exchange membrane fuel cells by uniform pressure electromagnetic forming

Numerical Modeling and Experimental Study of Microstamping Process for Fabricating Microchannels Using Thin Sheets of Titanium

Sandwich-like functional design of C/(Ti:C)/Ti modified Ti bipolar plates for proton exchange membrane fuel cells

Hot Gas Pressure Forming of Ti-55 High Temperature Titanium Alloy Tubular Component

Enhanced formability and forming efficiency for two-phase titanium alloys by Fast light Alloys Stamping Technology (FAST)

Plastic Deformation Mechanism of TA1 Pure Titanium Plate Using SEM-EBSD In-Situ Tensile Testing