Abstract:<p>Bipolar plates made of ultra-thin titanium sheet metals feature high corrosion resistance, electrical conductivity and strength-weight ratio. They are considered as a satisfying candidate for the proton exchange membrane fuel cell (PEMFC) used in vehicles. Bipolar plates have fine and complex sub-millimeter channel features which are employed to guide the flow of hydrogen, oxygen and cooling medium, to support the reaction space, to provide sealing structure, etc. Stamping process is an efficient method to fabricate those micro features with high precision and efficiency. However, the aspect ratio of those micro features is limited by the low forming limit of titanium sheet metals. Improving the aspect ratio of metallic bipolar plates could facilitate the uniform heat and mass transfer and further improve the efficiency and performance of PEMFC. Hence a challenging issue for the stamping process of bipolar plates is how to further improve the limit aspect ratio after forming. The multistage forming process is an efficient method to increase the ultimate forming depth and the accuracy by reducing the deformation localization tendency. This work aims to investigate the applicability of that process in fabricating high-aspect-ratio micro-channels on titanium sheet metals. Single stage forming experiments of the micro channels featured with fillet radius of 0.15 mm are first conducted. It is found that the ultimate forming depth of the channels parallel to the rolling direction is 12.67% higher than in the transverse direction. Furthermore, a series of punches and dies with three different fillet radii are employed in the multistage forming process. The ultimate depth of formed channels is revealed to increase from 438.1 to 621.0 μm, i.e. the aspect ratio from 0.46 to 0.67, comparing to the single stage forming process. Hence titanium bipolar plates with a higher aspect ratio could be achieved by utilizing the presented method. The contact resistances of the samples fabricated via single and three-stage forming were further tested to find out that the samples with a higher aspect ratio formed in a three-stage manner have an evident lower contact resistance.</p>

Optimal Design of Stamping Process for Fabrication of Titanium Bipolar Plates Using the Integration of Finite Element and Response Surface Methods

A comparative analysis of predictive models for estimating the formability of stamped titanium bipolar plates for proton exchange membrane fuel cells

Fabrication of micro channels for titanium PEMFC bipolar plates by multistage forming process

Manufacturing of Titanium Bipolar Plates Using Warm Stamping Process

Fabrication of titanium bipolar plates for proton exchange membrane fuel cells by uniform pressure electromagnetic forming

Investigation into the Three-Stage Formation of Micro-Channels with Ultra-Thin Titanium Sheets Used for Proton-Exchange Membrane Fuel Cell Bipolar Plates

Multiple criteria decision support analysis for manufacturing process parameters selection of metallic bipolar plates for polymer electrolyte membrane fuel cells

Optimizing die parameters of microstamping process for PEMFC 316L bipolar plate using NCL fracture criterion and response surface methodology

Characterization and prediction of micro channel depth of ultra-thin bipolar plates for PEMFCs

Processing and surface modification of titanium open cell porous structures for PEM fuel cell bipolar plates

Numerical Modeling and Experimental Study of Microstamping Process for Fabricating Microchannels Using Thin Sheets of Titanium

Investigation and optimization of the ultra-thin metallic bipolar plate multi-stage forming for proton exchange membrane fuel cell

Mechanical properties, corrosion resistance, and rubber pad forming of cold differential speed-rolled pure titanium for bipolar plates of proton-exchange membrane fuel cells

Probing the Corrosion Rates of Novel Titanium Substrates in a Simulated PEM Fuel Cell Environment

Hot stamping of ultra-thin stainless steel sheets for bipolar plates

Investigation of roll forming process and quality control factors for metal bipolar plates

The Corrosion Resistance Behaviors of Metallic Bipolar Plates for PEMFC Coated with Physical Vapor Deposition (PVD): An Experimental Study

High-Precision Thin Wall Bipolar Plates for Fuel Cell Applications via Injection Compression Molding with Dynamic Mold Temperature Control

Assessment of Carbon-Titanium Multilayer Coatings on Aluminum as Bipolar Plates in PEM Fuel Cells

Corrosion and Interfacial Contact Resistance of NiTi Alloy as a Promising Bipolar Plate for PEMFC

Corrosive behavior and interfacial conductivity of stampable a-C film on titanium bipolar plate in proton exchange membrane fuel cells