Abstract:Silicon (Si)-based materials have the highest capacity among the investigated anode materials and have been recognized as one of the most promising materials for lithium-ion batteries. However, it is still a significant challenge to obtain good performance for practical applications due to the huge volume change during the electrochemical process. To date, the most successful strategy is to introduce other components into Si to form composite or alloy materials. In this paper, using the etching technology, porous silicon was prepared, and the silicon and porous silicon were modified by chemical precipitation method. The surface morphology of the obtained material was analyzed by SEM and TEM, the crystalline was characterized by XRD, BET was used to measure the specific surface area and pore size distribution. The charge-discharge properties of the battery, in which lithium as the anode and the prepared materials as the cathode, were analyzed. Then the electrical characteristics were studied by cyclic voltammetry and AC impedance analysis method. In the program of charge and discharge experiments of the Li (without modified)/Si battery, the discharge capacity was 2281 mAh g-1 in the first circle, and it will decreased to 555 mAh g-1 in the second circle, indicating the rate of decline up to 75.7%. The results show that the discharge capacitance of the prepared lithium battery using silica, which modified by 12% CoO, as the cathode materials were 3269 mAh g-1 and 2021 mAh g-1 in the first and second circle, respectively, the rate of decline was 38.18%, which is superior than other sample. Using porous silicon modified by variety of weight percentage as cathode materials for lithium batteries, the charge and discharge results showed that when the weight percentage of cobalt oxide fixed at 12% showed the best results, and the first and second discharge capacity was 3590 mAh g-1 and 2679 mAh g-1, respectively, the rate of the discharge capacity decrease was only 25.4%. The cyclic voltammetry results showed that the peak current density of Li/Si-CoO (12%) battery was corresponding to the Li/Si system. According to the AC impedance analysis, we inferred the main reason for the decline in silicon battery in the process of continuous charge-discharge is the increase of impedance capacitance of charge transfer (R ct). The R ct of the Li/Si battery increased from 9.02 to 13.98 Ω at the end of first and fifth charge and discharge, however, the R ct of the Li/Si-CoO(12.0%) was 4.52Ω, which is lower than that of the Li/Si battery. The reason may be the volume of expansion and contraction of silicon can be effectively slow down due to the addition of the cobalt oxide. On the other hand, the conductivity may be increased because of the formation of cobalt metal in the process of charge and discharge, which will improve the utilization rate of silicon materials and slow its capacity decline.

Modifying SiO @ C As High-performance Anode of Lithium-ion Batteries

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Synchronous modification to realize micron-SiO x anode with durable and superior electrochemical performance for lithium-ion batteries

Nitrogen-Doped Carbon-Coating Disproportionated SiO Materials As Long Cycling Stable Anode for Lithium Ion Batteries

Modifying SiO As a Ternary Composite Anode Material((siox/g/sno2)@c) for Lithium Battery with High Li-ion Diffusion and Lower Volume Expansion

Modifying SiO as a ternary composite anode material((SiO x /G/SnO 2 )@C) for Lithium battery with high Li-ion diffusion and lower volume expansion

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

Modified SiO as a high performance anode for Li-ion batteries

High Performance SiOx Anode Enabled by AlCl3-MgSO4 Assisted Low-Temperature Etching for Lithium-Ion Batteries

A Low‐Cost and Scalable Carbon Coated SiO‐Based Anode Material for Lithium‐Ion Batteries

Facile Synthesis of SiO /C As High-Performance Anodes for Lithium-Ion Batteries

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

A Bm-Sio/ni/rgo Composite As an Anode Material for Lithium-Ion Batteries

Study on the Application of Ailicon-Cobalt Oxide Anode Material in Lithium-Ion Batteries

A SiOx/Sn/C Hybrid Anode for Lithium-Ion Batteries with High Volumetric Capacity and Long Cyclability

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiO<i><sub>x</sub></i> Anode

Cu3Si-Modified Silicon Nanoparticles Encapsulated Within SiOx and Hollow Carbon for Lithium-Ion Battery Anodes

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

POSS-Derived Synthesis and Full Life Structural Analysis of Si@C as Anode Material in Lithium Ion Battery

Improved electrochemical performance of silicon monoxide anode materials prompted by macroporous carbon