Abstract:Continuing advancements in quantum information processing have caused a paradigm shift from research mainly focused on testing the reality of quantum mechanics to engineering qubit devices with numbers required for practical quantum computation. One of the major challenges in scaling toward large-scale solid-state systems is the limited input/output (I/O) connectors present in cryostats operating at sub-kelvin temperatures required to execute quantum logic with high-fidelity. This interconnect bottleneck is equally present in the device fabrication-measurement cycle, which requires high-throughput and cryogenic characterization to develop quantum processors. Here we multiplex quantum transport of two-dimensional electron gases at sub-kelvin temperatures. We use commercial off-the-shelf CMOS multiplexers to achieve an order of magnitude increase in the number of wires. Exploiting this technology we advance 300 mm epitaxial wafers manufactured in an industrial CMOS fab to a record electron mobility of (3.9$\pm$0.6)$\times$10$^5$ cm$^2$\slash Vs and percolation density of (6.9$\pm$0.4)$\times$10$^{10}$ cm$^{-2}$, representing a key step toward large silicon qubit arrays. We envision that the demonstration will inspire the development of cryogenic electronics for quantum information and because of the simplicity of assembly, low-cost, yet versatility, we foresee widespread use of similar cryo-CMOS circuits for high-throughput quantum measurements and control of quantum engineered systems.

Multiplexing Technology Based on SQUID for Readout of Superconducting Transition-Edge Sensor Arrays

Advanced code-division multiplexers for superconducting detector arrays

An Impedance-Modulated Code-Division Microwave SQUID Multiplexer

A Spread-Spectrum SQUID Multiplexer

Simultaneous readout of 128 X-ray and gamma-ray transition-edge microcalorimeters using microwave SQUID multiplexing

Flux ramp modulation based hybrid microwave SQUID multiplexer

Demonstration of Simultaneous Optical Transition-Edge Sensors Readout Using Microwave SQUID Multiplexer with 5 MHz Flux Ramp Modulation

Low-noise microwave SQUID multiplexed readout of 38 x-ray transition-edge sensor microcalorimeters

Recent Advances in Frequency-Multiplexed TES Readout: Vastly Reduced Parasitics and an Increase in Multiplexing Factor with sub-Kelvin SQUIDs

Supercurrent Multiplexing with Solid-State Integrated Hybrid Superconducting Electronics

Power Consumption in SQUID Multiplexers for Space-Based Applications

Multiplexed quantum transport using commercial off-the-shelf CMOS at sub-kelvin temperatures

Two SQUID amplifiers intended to alleviate the summing node inductance problem in multiplexed arrays of Transition Edge Sensors

Multiplexed readout of ultrasensitive bolometers

Crosstalk Effects in Microwave SQUID Multiplexed TES Bolometer Readout

Multiplexed control scheme for scalable quantum information processing with superconducting qubits

Improved microwave SQUID multiplexer readout using a kinetic-inductance traveling-wave parametric amplifier

Cross-Coupling First-Order Gradient Superconducting Quantum Interference Device for Current Sensing

Physical Neighbor Crosstalk in Time Division Multiplexed SQUID Arrays for TES Readout

Cryogenic Multiplexing Control Chip for a Superconducting Quantum Processor