Abstract:High-speed ADCs are key blocks for ADC-based serial links [1]. The SAR ADC is credited for its high energy efficiency while speedup is a challenge. One limiting factor to the SAR ADC speed is metastability. Traditional solutions have to lengthen the time or speed up the comparator for metastability tolerance, leading to a trade-off between speed and power consumption. A better way to solve metastability is by monitoring the comparison time of the comparator <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$(\mathrm{t}_{\text{comp}})$</tex> and correcting codes. Prior research [2] extracts an additional bit of code from metastability by detecting <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> . However, since the <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> is sensitive to the input common-mode voltage (VCM), VCM-based switching is a must to ensure the accuracy of the obtained 1-bit code, which limits the speed of [2] to 700MS/s with 6b resolution. This work acquires two-bit codes from metastability and further accelerates the conversion. An on-chip self-tuning delay is adopted to ensure the accuracy of the extra 2 bits against PVT changes. This work also employs a bi-directional switching logic to speed up conversion and a proper comparator structure to minimize the impact of VCM changes. Thanks to the technique mentioned above, this work achieves 47. 2dB SNDR at 1GSs} with a Nyquist input. The 8b SAR ADC consumes 4. 15mW and 0.0032mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> including on-chip self-tuning delay, leading to a Walden FoM of 22.23fJ/conv.-step.

A 10b 700ms/s Single-Channel 1b/cycle SAR ADC Using a Monotonic-Specific Feedback SAR Logic with Power-Delay-optimized Unbalanced N/P-MOS Sizing

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 10-B 2b/Cycle 300ms/S Sar Adc With A Single Differential Dac In 40nm Cmos

An 11-Bit 350ms/S 2b/Cycle-Assisted Sar Adc With Improved Comparator Clock Generator

A 6b 2b/cycle Sar Adc Beyond 1gs/s with Hybrid Dac Structure and Low Kickback Noise Comparators

A 10b 250ms/s SAR ADC with Speed-Enhanced SAR Logic and Free Time More Than a Half of Sampling Period

A 1-V 10-Bit 80-Ms/s 1.6-Mw SAR ADC in 65-Nm GP CMOS

A 10-b 750 mu W 200MS/s Fully Dynamic Single-Channel SAR ADC in 40nm CMOS

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A Low Voltage and Low Power 10-Bit Non-Binary 2b/cycle Time and Voltage Based SAR ADC

A 10b 750 μ W 200 MS / s Fully Dynamic Single-Channel SAR ADC in 40 nm CMOS

A 0.9-V 12-Bit 100-Ms/s 14.6-Fj/conversion-step SAR ADC in 40-Nm CMOS

A 7-Bit 3.8-Gs/s 2-Way Time-Interleaved 4-Bit/cycle SAR ADC 16× Time-Domain Interpolation in 28-Nm CMOS

A 400-MS/s 8-b 2-b/cycle SAR ADC with shared interpolator and alternative comparators

A 0.95-Mw 6-B 700-Ms/s Single-Channel Loop-Unrolled SAR ADC in 40-Nm CMOS

A 1 V 186-Μw 50-Ms/s 10-Bit Subrange SAR ADC in 130-Nm CMOS Process

A 10-B 750µw 200ms/s Fully Dynamic Single-Channel SAR ADC in 40nm CMOS

A Single-Channel 10-Bit 160 MS/s SAR ADC in 65 Nm CMOS

A 960 Μw 10-Bit 70-Ms/s SAR ADC with an Energy-Efficient Capacitor-Switching Scheme

An 8b 1GS/s SAR ADC with Metastability-Based Resolution/Speed Enhancement and Self-Tuning Delay Achieving 47.2dB SNDR at Nyquist Input.