Abstract:High-speed ADCs are key blocks for ADC-based serial links [1]. The SAR ADC is credited for its high energy efficiency while speedup is a challenge. One limiting factor to the SAR ADC speed is metastability. Traditional solutions have to lengthen the time or speed up the comparator for metastability tolerance, leading to a trade-off between speed and power consumption. A better way to solve metastability is by monitoring the comparison time of the comparator <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$(\mathrm{t}_{\text{comp}})$</tex> and correcting codes. Prior research [2] extracts an additional bit of code from metastability by detecting <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> . However, since the <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> is sensitive to the input common-mode voltage (VCM), VCM-based switching is a must to ensure the accuracy of the obtained 1-bit code, which limits the speed of [2] to 700MS/s with 6b resolution. This work acquires two-bit codes from metastability and further accelerates the conversion. An on-chip self-tuning delay is adopted to ensure the accuracy of the extra 2 bits against PVT changes. This work also employs a bi-directional switching logic to speed up conversion and a proper comparator structure to minimize the impact of VCM changes. Thanks to the technique mentioned above, this work achieves 47. 2dB SNDR at 1GSs} with a Nyquist input. The 8b SAR ADC consumes 4. 15mW and 0.0032mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> including on-chip self-tuning delay, leading to a Walden FoM of 22.23fJ/conv.-step.

A 400-MS/s 8-b 2-b/cycle SAR ADC with shared interpolator and alternative comparators

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 10 MS/s 10 bit SAR A/D Converter in RF System

A 4-Mw8-b 600-Ms/s 2-B-per-cycle SAR ADC with a Capacitive DAC

An 11-Bit 350ms/S 2b/Cycle-Assisted Sar Adc With Improved Comparator Clock Generator

A 6b 2b/cycle Sar Adc Beyond 1gs/s with Hybrid Dac Structure and Low Kickback Noise Comparators

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

A 10b 50 MS/s Single-Channel Asynchronous SAR ADC with Two Alternate Comparators and Comparator Calibration

A 10-B 2b/Cycle 300ms/S Sar Adc With A Single Differential Dac In 40nm Cmos

An 11-Bit 500 MS/s Two-Step SAR ADC with Non-Attenuated Passive Residue Transfer.

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

A 6-B 600 MS/s SAR ADC with a New Switching Procedure of 2-B/stage and Self-Locking Comparators

An 8.2 fJ/conversion-step 9-bit 135 MS/s SAR ADC with redundant methods for acceleration.

A 270-Ms/s 6-B Sar Adc with Preamplifier Sharing and Self-Locking Comparators

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

A 7-bit 900-MS/s 2-Then-3-bit/cycle SAR ADC With Background Offset Calibration

A 960 Μw 10-Bit 70-Ms/s SAR ADC with an Energy-Efficient Capacitor-Switching Scheme

An 8b 1GS/s SAR ADC with Metastability-Based Resolution/Speed Enhancement and Self-Tuning Delay Achieving 47.2dB SNDR at Nyquist Input.