Abstract:A phenomenon called rotating instability was rarely reported in a centrifugal compressor, although some associated discussions can be found in axial compressors. This paper presents a numerical investigation on the unsteadiness of the tip leakage flow and rotating instability in an isolated centrifugal compressor impeller. A three-dimensional, unsteady full annuls simulation is performed under three different operating conditions. The tip leakage flow unsteadiness at the impeller inlet and inside the impeller passage is detected by the pressure fluctuation. During the throttling process, the temporal and spatial propagation characteristic of the tip leakage flow unsteadiness under the near stall operating condition is revealed based on the wavelet analysis, Fourier transform, and dynamic mode decomposition. Furthermore, the relationship between the tip leakage flow unsteadiness and the rotating instability is also discussed. The results show that the pressure fluctuation mainly concentrates in the tip region at the near stall operating condition, which indicates the occurrence and circumferential propagation of tip leakage flow unsteadiness. The circumferential propagation of the tip leakage flow unsteadiness induces a significant circumferential rotating pressure wave with a wave number of 9 and approximately 48.2% of the rotational speed of the impeller. The characteristic frequency of the tip leakage flow unsteadiness agrees well with the dominant mode frequency of rotating instability. Therefore, the tip leakage flow unsteadiness is assumed to be responsible for the rotating instability. During the throttling process, the formation and development of the rotating instability at near stall operating condition can be divided into three stages based on signal analysis: prior to rotating instability, generation and development, and rotating instability.

On the Mode Characteristics of Rotating Instability with Different Tip Clearances

Tip Flow on Rotating Instability on an Axial Compressor with Different Tip Clearances

Investigation on Mode Characteristics of Rotating Instability and Rotating Stall in an Axial Compressor

Numerical investigation of tip clearance effects on rotating instability of a low-speed compressor

Investigation on Rotating Instability in an Axial Compressor with Different Inlet Reynolds Numbers

Investigation of Rotating Instability Characteristics in an Axial Compressor with Different Tip Clearances

Tip leakage flow, tip aerodynamic loading and rotating instability in a subsonic high-speed axial flow compressor rotor

Numerical investigation into rotating instability and the vortex structure near the tip in a transonic compressor rotor

Time-Resolved Mode Characteristics of Rotating Instability and Rotating Stall in an Axial Compressor

Experimental study on rotating instability mode characteristics of axial compressor tip flow

Numerical Investigation on the Flow Mechanism of Multi-Peak Frequency Feature of Rotating Instability

Circumferential Mode Analysis of Axial Compressor Tip Flow Using Fourier Transform and Proper Orthogonal Decomposition

Investigations of Rotating Instability and Fluctuating Tip Clearance Flow in a Low-Speed Axial Compressor

Numerical Investigations of Rotating Instability and Unsteady Tip Vortex Structures in an Axial Compressor

Evolution of the Flow Instabilities in an Axial Compressor Rotor with Large Tip Clearance: an Experimental and URANS Study

Investigation of tip leakage flow unsteadiness and rotating instability in a centrifugal compressor impeller

Numerical Investigation on Rotating Instability in a Multistage Axial-Radial Combined Compressor

The unsteadiness of tip leakage vortex breakdown and its role in rotating instability

Modal Analysis of Axial Compressor Tip Rotating Instability under Varying Operating Conditions

Effect of Tip Clearance on Non-Synchronous Propagating Flow Disturbances of Compressor Rotors under High Aerodynamic Loading Conditions

Effect of Rotating Inlet Distortion with Multi-distorted Regions on Compressor Stability