Abstract:In this study, a simple pyramid-like ultra-wideband absorber was designed to explore high absorptivity across a wide bandwidth. The absorber consisted of eight layers organized into four groups, and each group comprised a metal layer followed by an oxide layer, both of which were square with equal side lengths. Specifically, the chosen oxides, arranged from bottom to top, included SiO2 (t7 layer), Al2O3 (t5 layer), SiO2 (t3 layer), and Al2O3 (t1 layer). In the initial design phase, the thickness of the t8 Ti layer was set to 50 nm and assigned initial values to the thicknesses of the t7-t1 layers, and the widths of the four groups w4, w3, w2, and w1, decreased successively from bottom to top, creating a structure reminiscent of a pyramid. Comsol (version 6.0) was utilized to simulate and systematically vary one parameter at a time, ranging from the thicknesses of the t7-t1 layers to the widths of w4-w1, in order to identify the most suitable structural parameters. Our analyses demonstrated that multimode resonance arose due to the emergence of absorption peaks at lower wavelengths between larger and smaller areas. Additionally, surface plasmon resonance and interference effects between various layers and materials were attributed to the alternating arrangement of metal and oxide layers. The enhancements in the electric field observed at different resonance peak wavelengths illustrated the Fabry–Perot cavity effect, while the impedance matching effect was observed through variations in the real and imaginary parts of the optical impedance with respect to the wave vector. After simulating using these optimally found thicknesses and widths, the aforementioned effects manifested in the pyramid-like ultra-wideband absorber we designed, with its absorptivity surpassing 0.900 across the spectrum from ultraviolet A (335 nm) to middle infrared (4865 nm).

Design and Optimization of Epsilon-Near-Zero Multilayer Structures with Broadband Absorption Performance

Optimization of Epsilon-Near-Zero Multilayers for Near-Perfect Light Absorption Using an Enhanced Genetic Algorithm

Compact Multilayer Film Structures for Ultrabroadband, Omnidirectional, and Efficient Absorption

Ultrabroadband and Omnidirectional Absorbers Based on a Tandem Multilayer Structure

Enhanced-Genetic-Algorithm-Based Absorption Performance Optimization of Epsilon-Near-Zero Multilayer

Multi-narrowband absorber based on subwavelength grating structure

Design of Multilayer Planar Film Structures for Near-Perfect Absorption in the Visible to Near-Infrared.

Integrating Two Epsilon-Near-zero Materials into Planar Multilayer Metamaterial Structure for Broadband Near-Perfect Mid-IR Absorption

Broadband Absorption Based on Multi-Layered ENZ Film: from Directional to Omnidirectional Absorption

Design of an Ultra-Broadband Near-Perfect Bilayer Grating Metamaterial Absorber Based on Genetic Algorithm.

Broadband Epsilon-Near-Zero Metamaterials with Step-Like Metal-Dielectric Multilayer Structures

Polarization-Independent, tunable, broadband perfect absorber based on semi-sphere patterned Epsilon-Near-Zero films

Broadband Optical Absorption Based On Single-Sized Metal-Dielectric-Metal Plasmonic Nanostructures With High-Epsilon '' Metals

Design of an Optically Transparent and Broadband Absorber Based on a Multi-Objective Optimization Algorithm

Tunable Berreman Mode in Highly Conductive Organic Thin Films.

Broadband and Wide-Angle Absorber Based on Indium Tin Oxide Films

Broadband and Highly Absorbing Multilayer Structure in Mid-Infrared

Optimization Design of a Multilayer Structure for Broadband and Direction-Selective Emissivity

Investigation of a Pyramid-like Optical Absorber with High Absorptivity in the Range of Ultraviolet A to Middle Infrared

Epsilon-near-zero material-based bi-layer metamaterials for selective mid-infrared radiation

Epsilon-near-zero thin-film metamaterials for wideband near-perfect light absorption