Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Recent Advances in Realizing Highly Aligned Organic Semiconductors by Solution‐Processing Approaches (small Methods 10/2022)

Recent Advances in Realizing Highly Aligned Organic Semiconductors by Solution‐Processing Approaches

Editorial: High-Performance Organic Thin-Film Transistors

Recent progress in organic field‐effect transistor‐based integrated circuits

Precise Synthesis of Organic Heterostructures Via the Synergy Approach of Polymorphism and Cocrystal Engineering for Optical Applications

Highly Efficient Solution-Processed Organic Photovoltaics Enabled by Improving Packing Behavior of Organic Semiconductors

Nanospheres Lithography: Recent Advances of Nanospheres Lithography in Organic Electronics (Small 28/2021)

Solution-Processed, Large-Area, Two-Dimensional Crystals of Organic Semiconductors for Field-Effect Transistors and Phototransistors

Solution-processed crystalline organic integrated circuits

Solution-Processible Conductive Organics For Efficient Polymer And Perovskite Solar Cells

Recent Advances on π-Conjugated Polymers as Active Elements in High Performance Organic Field-Effect Transistors

Alignment and Patterning of Organic Single Crystals for Field-Effect Transistors

Organic Semiconductors: Thiazole‐Based Organic Semiconductors for Organic Electronics (Adv. Mater. 23/2012)

Solution‐Processed 2D Molecular Crystals: Fabrication Techniques, Transistor Applications, and Physics

Organic ultrathin nanostructure arrays: materials, methods and applications

Solution-processed Organic Single-Crystalline Semiconductors with a Fence-Like Shape Via Ultrasound Concussion

25th anniversary article: recent advances in n-type and ambipolar organic field-effect transistors.

Recent Advances of Nanospheres Lithography in Organic Electronics

Organic Electronics: Efficient and Air‐Stable Aqueous‐Processed Organic Solar Cells and Transistors: Impact of Water Addition on Processability and Thin‐Film Morphologies of Electroactive Materials (Adv. Energy Mater. 34/2018)

Solution Coating of Large-Area Organic Semiconductor Thin Films with Aligned Single-Crystalline Domains

Solution-processed organic semiconductor crystals for field-effect transistors: from crystallization mechanism towards morphology control