Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Alignment and Patterning of Organic Single Crystals for Field-Effect Transistors

Organic Light-Emitting Field-Effect Transistors: Device Geometries and Fabrication Techniques

Controlling the crystal formation in solution-process for organic field-effect transistors with high-performance

Solution-processed organic semiconductor crystals for field-effect transistors: from crystallization mechanism towards morphology control

Patterning Solution-Processed Organic Single-Crystal Transistors with High Device Performance

Advances in Organic Micro/nanocrystals with Tunable Physicochemical Properties

Solution-Processed, Large-Area, Two-Dimensional Crystals of Organic Semiconductors for Field-Effect Transistors and Phototransistors

High-resolution patterning of organic semiconductor single crystal arrays for high-integration organic field-effect transistors

Planar Nanoscale Architecture for Organic Thin-Film Field-Effect Transistors

Precise patterning of single crystal arrays of organic semiconductors by a patterned microchannel dip-coating method for organic field-effect transistors

Directly writing 2D organic semiconducting crystals for high-performance field-effect transistors

Morphology controlled synthesis of one-dimensional BTR micro-ribbons and two-dimensional single-crystal films for field-effect transistors

Editorial: High-Performance Organic Thin-Film Transistors

Solution-processed crystalline organic integrated circuits

One-dimensional (1D) Micro/nanostructures of Organic Semiconductors for Field-Effect Transistors

Large plate-like organic crystals from direct spin-coating for solution-processed field-effect transistor arrays with high uniformity

Homogeneously Oriented Organic Single‐Crystalline Patterns Grown by Microspacing In‐Air Sublimation

Large-scale Fabrication of Field-Effect Transistors Based on Solution-Grown Organic Single Crystals

Organic Semiconductor Single Crystal Arrays: Preparation and Applications

Patterning organic semiconductor crystals for optoelectronics

Solution‐Processed 2D Molecular Crystals: Fabrication Techniques, Transistor Applications, and Physics