Abstract:Passive wireless flexible sensors are attractive in the areas of wearable electronics, healthcare services, and smart robotics due to the advantages of simplified electrical connection, no requirement for power source, and long lifetime. In this article, a wireless passive flexible pressure sensor based on ultrahigh-frequency (UHF) radio frequency identification (RFID) technology is proposed. The sensor consists of three layers, including a flexible RFID tag, an absorptive layer of ferrite film, and a compressive separation sponge in between. As an external load applies on the sensor, the sponge layer gets compressed, and the separation distance between the RFID tag and ferrite film reduces. As a result, the strength of the backscattering signal received by an RFID reader decreases due to the increment on the absorption effect from the ferrite film. Importantly, this is the first passive UHF pressure sensor adopting a tag-sponge-ferrite film structure, providing a compact solution to wireless pressure detection in the UHF band. Theoretical simulations have been conducted to analyze the influence of the thickness of the separation layer on the strength of the backscattering signal of the sensor, from which the optimal design of the passive pressure sensor has been defined. The sensor shows a high sensitivity of −9.49 dBm/kPa in the pressure range of 1.39–2.57 kPa, and environmental stabilities (within 0.91%) to temperature changes (25 °C–45 °C) and relative humidity (RH) variations (43%RH–82%RH). Importantly, the wireless transmission distance between the sensor and the reader is more than 70 cm, which is 16.67 times higher than a single LC-based wireless pressure sensor. This facilitates to broaden the potential usages of wireless passive pressure sensors in the fields of wearable electronics. To demonstrate the utility, the sensor has been integrated with a cuff and a cushion to wirelessly monitor bandage pressures and body movements.

Wireless Sensor for Meat Freshness Assessment Based on Radio Frequency Communication

Passive and Wireless Near Field Communication Tag Sensors for Biochemical Sensing with Smartphone

Real-time Assessment of Food Freshness in Refrigerators Based on a Miniaturized Electronic Nose

The Meat Freshness Monitoring System Using the Smart RFID Tag

Radio Frequency Identification Enabled Wireless Sensing for Intelligent Food Logistics

Printed, flexible, compact UHF-RFID sensor tags enabled by hybrid electronics

Two-channel Near-field Radio Frequency Cardiac Sensor

Compact Chipless RFID Sensor for Frozen Food Monitoring

Battery-Free Pork Freshness Estimation Based on Colorimetric Sensors and Machine Learning

Wireless Tiny Mass Sensor System Based On Fbar

Design and research of multi-information fusion RFID sensor for fruit and vegetable quality detection

A Novel RFID-Based Strain Sensor for Wireless Structural Health Monitoring

Improvement of non-destructive detection of lamb freshness based on dual-parameter flexible temperature-impedance sensor

Optical sensing system for meat freshness analysis

Sensing With Wireless Power and Data Transfer—Design of a Multisensor Augmented RFID

Battery-less Sensing of Body Movements through Differential Backscattered RFID Signals

A Flexible Wireless Pressure Sensor Based on UHF RFID Technology

Wireless Detection of Biogenic Amines Using a Split-Ring Resonator with Silver Nanoparticles-Decorated Molybdenum Disulfide

Chipless RFID-inspired Sensing for Smart Agriculture: A Review

From Chip-based to Chipless RFID Sensors: A Review

A Novel Flexible Chipless RFID Tag Sensor for Monitoring Environmental Humidity