Diffusion of Li+ in LiNi1/3Mn1/3Co1/3O2

Xiaoyu Zhang,Alain Mauger,Qi Lu,Weijun Jiang,Henri Groult,Christian M. Julien

DOI: https://doi.org/10.1149/ma2011-01/11/564

2011-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Yi Zhu

2001-01-01

Journal of Functional Biomaterials

Abstract:Li x Co 0.8 Ni 0.2 O 2, as the cathode materials for lithium-ion battery, were prepared from the precursors, Co 0.8 Ni 0.2 (OH) 2, which were synthesized by the controlled crystallization technology. The experiments of energy diffraction spectroscopy showed that the elements of Co and Ni were distributed uniformly in the active materials. Because the elements of Co and Ni have been distributed uniformly in the M layer of M(OH) 2 during the controlled crystallization process, the long-term calcining process was avoided, when the recomposing process of diffusion happened in the common solid solutions. The microphotographs of SEM indicated the change of microcosmic morphology. The results of XRD proved that the Li x Co 0.8 Ni 0.2 O 2 were single phase with α-NaFeO 2 layered structure, and have no other phases. The crystal lattices of a and c underwent a process from small to big and then to small, and c/a underwent a process from big to small and then to big.
Monitoring the Formation of Nickel-Poor and Nickel-Rich Oxide Cathode Materials for Lithium-Ion Batteries with Synchrotron Radiation

Bixian Ying,Jack R. Fitzpatrick,Zhenjie Teng,Tianxiang Chen,Tsz Woon Benedict Lo,Vassilios Siozios,Claire A. Murray,Helen E. A. Brand,Sarah Day,Chiu C. Tang,Robert S. Weatherup,Michael Merz,Peter Nagel,Stefan Schuppler,Martin Winter,Karin Kleiner

DOI: https://doi.org/10.1021/acs.chemmater.2c02639

IF: 10.508

2023-03-07

Chemistry of Materials

Abstract:The syntheses of Ni-poor (NCM111, LiNi(1/3)Co(1/3)Mn(1/3)O(2)) and Ni-rich (NCM811 LiNi(0.8)Co(0.1)Mn(0.1)O(2)) lithium transition-metal oxides (space group R3̅m) from hydroxide precursors (Ni(1/3)Co(1/3)Mn(1/3)(OH)(2), Ni(0.8)Co(0.1)Mn(0.1)(OH)(2)) are investigated using in situ synchrotron powder diffraction and near-edge X-ray absorption fine structure spectroscopy. The development of the layered structure of these two cathode materials proceeds via two utterly different reaction mechanisms....

materials science, multidisciplinary,chemistry, physical
Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Synthesized by Co-precipitation Method

Xiaoyu Zhang,Francois Gendron,Alain Mauger,Lu Qi,Henri Groult,Laurent Perrigaud,Christian M. Julien

DOI: https://doi.org/10.1149/ma2009-02/8/611

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Evaluation of the Cation Mixing in LiNi1/3Mn1/3Co1/3O2 Compound

Xiaoyu Zhang,Francois Gendron,Alain Mauger,Lu Qi,Christian M. Julien

DOI: https://doi.org/10.1149/ma2009-02/7/471

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Surface Analysis of the Lithium-Rich Cathode Material Li1.2Mn0.54Co0.13Ni0.13NaxO2 by Advanced Electron Microscopy

Wei HUANG,Chun-Yang WU,Yue-Wu ZENG,Chuan-Hong JIN,Ze ZHANG

DOI: https://doi.org/10.3866/pku.whxb201605164

2016-01-01

Acta Physico-Chimica Sinica

Abstract:In this work, Li1.2Mn0.54Co0.13Ni0.13NaxO2 was prepared via an ion-exchange process combined with a solid-state reaction. Aberration-corrected scanning transmission electron microscopy (STEM), energy dispersive X-ray spectroscopy (EDS), and electron energy loss spectroscopy (EELS) were all used to study the surface structure and chemical distribution of the resulting material. Nickel (Ni) was found to be enriched at the surface in regions perpendicular to the lithium diffusion channels (that is, the (200) surfaces) and also exhibited a tendency to diffuse into the lithium (Li) layers, generating a Fm3m rocksalt phase. In contrast, cobalt (Co) segregated along the transition metal (TM) layers of the (001) and (200) surfaces. The results of aging trials demonstrated that Co-enriched layers lead to surface structure instability, as evidenced by the formation of a large number of antisite defects (Li-TM) and rocksalt phase structures at the (001) surface during aging.
Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Weijie Liu,Qiang Shi,Qunting Qu,Tian Gao,Guobin Zhu,Jie Shao,Honghe Zheng

DOI: https://doi.org/10.1039/c6ta08891k

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:The co-doping with metal cations and incorporation of the Li7La3Zr2O12 (LLZO) superionic conductor into spinel LiNi0.5Mn1.5O4 are achieved in situ through a spray drying method by co-doping with Zr and La elements. Microscopic structural characterizations reveal that the doping of hetero-cations into LiNi0.5Mn1.5O4 is effective at reducing the amount of Mn3+, enhancing the cation ordering, and improving the structural stability of LNMO crystals. Scanning transmission electron microscopy (STEM) and Energy Dispersive Spectrometric (EDS) analyses validate the successful growth of LLZO during the calcination of the LNMO material. Incorporation of the LLZO superionic conductor into the bulk phase of LNMO considerably improves the intrinsic lithium diffusion rate within the crystal. Electrochemical studies reveal that the LNMO/LLZO composite at 50 : 1 ratio exhibits the best overall electrochemical behavior, in terms of reversible capacity, rate capability, and long-term cycling performance. At 20C discharge rate, the composite cathode delivers a capacity of 84.5 mA h g(-1), whereas the pristine LNMO only maintains 14.8 mA h g(-1) capacity. After 300 cycles, a capacity retention of 95.9% is obtained for the composite electrode, but only 87.6% for the pure LNMO cathode. The lithium ion diffusion coefficient of 1.83 x 10(-10) cm(2) s(-1) is obtained for the composite cathode, which is three times as high as that of pure LNMO (6.43 x 10(-11)).
A Deflagration Method to Synthesize LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Li-ion Batteries

Jiebin Li,Lilong Xiong,Youlong Xu

DOI: https://doi.org/10.1149/ma2009-02/5/282

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Lithium Diffusion & Magnetism in Battery Cathode Material LixNi1/3Co1/3Mn1/3O2

M. Mansson,H. Nozaki,J. M. Wikberg,K. Prsa,Y. Sassa,M. Dahbi,K. Kamazawa,K. Sedlak,I. Watanabe,J. Sugiyama

DOI: https://doi.org/10.48550/arXiv.1406.3985

2014-06-16

Materials Science

Abstract:We have studied low-temperature magnetic properties as well as high-temperature lithium ion diffusion in the battery cathode materials LixNi1/3Co1/3Mn1/3O2 by the use of muon spin rotation/relaxation. Our data reveal that the samples enter into a 2D spin-glass state below TSG=12 K. We further show that lithium diffusion channels become active for T>Tdiff=125 K where the Li-ion hopping-rate [nu(T)] starts to increase exponentially. Further, nu(T) is found to fit very well to an Arrhenius type equation and the activation energy for the diffusion process is extracted as Ea=100 meV.
Kinetics Tuning of Li-Ion Diffusion in Layered Li(NixMnyCoz)O2

Yi Wei,Jiaxin Zheng,Suihan Cui,Xiaohe Song,Yantao Su,Wenjun Deng,Zhongzhen Wu,Xinwei Wang,Weidong Wang,Mumin Rao,Yuan Lin,Chongmin Wang,Khalil Amine,Feng Pan

DOI: https://doi.org/10.1021/jacs.5b04040

2016-01-01

Abstract:Using ab initio calculations combined with experiments, we clarified how the kinetics of Li-ion diffusion can be tuned in LiNixMnyCozO2 (NMC, x + y + z = 1) materials. It is found that Li-ions tend to choose oxygen dumbbell hopping (ODH) at the early stage of charging (delithiation), and tetrahedral site hopping (TSH) begins to dominate when more than 1/3 Li-ions are extracted. In both ODH and TSH, the Li-ions surrounded by nickel (especially with low valence state) are more likely to diffuse with low activation energy and form an advantageous path. The Li slab space, which also contributes to the effective diffusion barriers, is found to be closely associated with the delithiation process (Ni oxidation) and the contents of Ni, Co, and Mn.
Valence study of and : The role of charge transfer and charge disproportionation

Daisuke Takegami,Kosuke Kawai,Miguel Ferreira-Carvalho,Sahana Rößler,Cheng-En Liu,Chang-Yang Kuo,Chun-Fu Chang,Atsusa Minamida,Tatsuya Miyazaki,Masashi Okubo,Liu Hao Tjeng,Takashi Mizokawa

DOI: https://doi.org/10.1103/physrevmaterials.8.055401

IF: 3.98

2024-05-08

Physical Review Materials

Abstract:The series of LiMO2 ( M : transition metal) materials are highly relevant as cathode materials of Li-ion batteries. The stability of such systems remains an important factor for their usability in batteries, and depends strongly on the electronic configuration of the transition-metal ions. In particular, the promising class of multi-transition-metal systems exhibits complicated valence states due to intermetallic charge transfer and charge disproportionation. Here we perform a systematic study on the valence of the transition-metal ions using x-ray absorption spectroscopy on the M−L2,3 edges and O- K edges. In Li(Ni0.5Mn0.5)1−xCoxO2 we established that the valence is Co3+ and Ni0.52+Mn0.54+ throughout the whole series. Meanwhile, in LiNi1−xCoxO2 we found that the Ni displays a behavior consistent with a charge disproportionated negative charge transfer system, and that with increased concentration of Co3+ , the disproportionation signal decreases. Since the number of O 2p holes also gets reduced, we infer that the material will also become more unstable. https://doi.org/10.1103/PhysRevMaterials.8.055401 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Open access publication funded by Max Planck Society. Published by the American Physical Society

materials science, multidisciplinary
Intrinsic Role of Cationic Substitution in Tuning Li/Ni Mixing in High-Ni Layered Oxides

Dawei Wang,Chao Xin,Mingjian Zhang,Jianming Bai,Jiaxin Zheng,Ronghui Kou,Jun Young Peter Ko,Ashfia Huq,Guiming Zhong,Cheng-Jun Sun,Yong Yang,Zonghai Chen,Yinguo Xiao,Khalil Amine,Feng Pan,Feng Wang

DOI: https://doi.org/10.1021/acs.chemmater.8b04673

IF: 10.508

2019-01-01

Chemistry of Materials

Abstract:Nickel-rich transition-metal (TM) layered oxides, particularly those with high Ni content, attract worldwide interest for potential use as high-capacity cathodes in next-generation Li-ion batteries. However, as Ni loading increases, Li and Ni sitting at octahedra tend to mix, resulting in reduced electrochemical activity, which has been one major obstacle to their practical applications. Herein, we investigate the kinetic and thermodynamic aspects of Li/Ni mixing in Li-Ni0.7MnxCo0.3-xO2 (0 <= x <= 0.3) as they are synthesized, through quantitative determination of structural ordering and comparison to ab initio calculations. Results from this study elucidate the role of Co/Mn-substitution in tuning Li/Ni ordering, intrinsically through local magnetic interaction. Specifically, Co substitution facilitates Li/Ni ordering by relieving the intra-plane magnetic frustration and reducing the inter-plane super-exchange (SE) interaction; contrast, Mn exacerbates magnetic frustration and strengthens SE, thereby aggravating Li/Ni mixing. These findings highlight the interplay between local magnetic interaction and cationic ordering, which has yet to be fully investigated for the needs of designing high-Ni layered cathodes and, broadly, TM-based oxides for various applications.
Chemical and Structural Evolution During the Synthesis of Layered Li(Ni,Co,Mn)O2 Oxides

Weibo Hua,Kai Wang,Michael Knapp,Bjoern Schwarz,Suning Wang,Hao Liu,Jing Lai,Marcus Mueller,Alexander Schoekel,Alexander Missyul,Dario Ferreira Sanchez,Xiaodong Guo,Joachim R. Binder,Jie Xiong,Sylvio Indris,Helmut Ehrenberg

DOI: https://doi.org/10.1021/acs.chemmater.9b05279

IF: 10.508

2020-01-01

Chemistry of Materials

Abstract:The discovery of Li-containing transition-metal (TM) oxides has attracted broad interest and triggered intensive studies on these oxides as cathodes for lithium-ion batteries over decades. Unfortunately, a clear picture of how Li/TM/O ions are transported and electrons are transferred during the synthesis of these compounds is still missing, especially when cubic closepacked (ccp) anion sublattices are involved, as it is the case for spinel, layered, or rock-salt systems. In the present study, a series of layered Li(Ni,Co,Mn)O-2 oxides were chosen as target materials to elucidate the underlying formation mechanism of these compounds during the high-temperature lithiation reaction. The consistent experimental results demonstrate that, as lithium ions are inserted from the surface to the bulk, some TM cations located within the bulk of crystallites are able to diffuse to the near-surface region. They create cation vacancies for the inserted lithium ions, and the mass transport behavior of these elements is driven by the chemical potential gradient. Concurrently, oxygen anions from lithium oxides and/or ambient oxygen are adsorbed and incorporated into the ccp oxygen lattice on the surface structure, connecting the relocated TM cations and the incorporated lithium ions by forming ionic bonds. This process is concomitant with crystal growth, surface reorganization caused by phase transformation, and occurrence and disappearance of pores.
Aging of LiNi1/3Mn1/3Co1/3O2 as Cathode Material for Li-ion Batteries

Xiaoyu Zhang,Francois Gendron,Alain Mauger,Lu Qi,Christian Julien

DOI: https://doi.org/10.1149/ma2009-02/7/436

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Equation of State and Electrical Transport Properties of Mixture of Li1.2Mn0.54Co0.13Ni0.13O2 and LiNi0.87Co0.09Mn0.03Al0.01O2 at High Pressure

Lun Xiong,Pu Tu,Yongqing Hu,Xiang Hou,Shiyun Wu,Xingquan Liu,Hongliang Dong,Ziyou Zhang

DOI: https://doi.org/10.1142/s0217979221502271

2021-01-01

International Journal of Modern Physics B

Abstract:The equation of state (EOS) of mixture of Li[Formula: see text]Mn[Formula: see text]Co[Formula: see text]Ni[Formula: see text]O2 and LiNi[Formula: see text] Co[Formula: see text]Mn[Formula: see text]Al[Formula: see text]O2 was studied by synchrotron radiation X-ray diffraction (XRD) at room-temperature in a diamond anvil cell (DAC). The results showed that the hexagonal structure is maintained to the highest pressure of 23.1 GPa. The bulk modulus and its first derivative obtained from XRD data are [Formula: see text] GPa and [Formula: see text], respectively. In addition, we have investigated the high-pressure electrical conductivity of the mixture of Li[Formula: see text]Mn[Formula: see text]Co[Formula: see text]Ni[Formula: see text]O2 and LiNi[Formula: see text]Co[Formula: see text]Mn[Formula: see text]Al[Formula: see text]O2 to 22.9 GPa in a DAC. It is found that the resistance decreases with the increase of pressure and changes exponentially.
A Baseline Kinetic Study of Co-Free Layered Li 1+x (Ni 0.5 Mn 0.5 ) 1−x O 2 Positive Electrode Materials for Lithium-Ion Batteries

Nutthaphon Phattharasupakun,Marc M. E. Cormier,Yulong Liu,Chenxi Geng,Eniko Zsoldos,Ines Hamam,Aaron Liu,Michel B. Johnson,Montree Sawangphruk,J. R. Dahn

DOI: https://doi.org/10.1149/1945-7111/ac3157

IF: 3.9

2021-11-01

Journal of The Electrochemical Society

Abstract:Variations of Li chemical diffusion coefficient ( Dc ) with voltage in a series of Co-free Li1+x(Ni0.5Mn0.5)1−xO2, 0 ≤ x ≤ 0.12, materials were systematically investigated using the recently developed “Atlung Method for Intercalant Diffusion”. The effects of primary and secondary particle sizes, excess Li content, heating temperature, and synthesis atmospheres on Dc were measured. Li-ion kinetics can be enhanced by an order of magnitude by lowering the amount of Ni atoms in the Li layers (cation mixing) from 10% to 4%. Decreasing cation mixing can be accomplished by either increasing the excess Li content or heating temperature. When cycled to 4.6 V, higher specific capacities were obtained, but with a penalty to Dc due to transition metal migration to the Li layers. The primary particles control the Li diffusion length in these materials, regardless of the secondary particle size indicating that grain boundary diffusion must be very rapid. The general trends observed in this work are of great value for the development of higher Mn-containing, Co-free materials. It should be possible to increase energy/power density by making large secondary particles, composed of small primary particles to minimize the solid-state diffusion length while maximizing grain boundary diffusion.

electrochemistry,materials science, coatings & films
Novel electronic states realized by the interplay between Li diffusion and Co$^{\rm 3+}$$/$Co$^{\rm 4+}$ charge ordering in Li$_{\rm x}$CoO$_2$

Kiyotaka Miyoshi,Kentaro Manami,Ryo Sasai,Shijo Nishigori,Jun Takeuchi

DOI: https://doi.org/10.1103/PhysRevB.98.195106

2018-11-02

Abstract:Measurements of dc magnetization ($M$) and electrical resistivity ($\rho$) have been carried out as a function of temperature ($T$) for layered oxide Li$_{\rm x}$CoO$_2$ (0.51$\leq$$x$$\leq$1.0) using single crystal specimens. After slow cool of the specimens down to 10 K, both of the $M$($T$) and $\rho$($T$) curves are found to exhibit a clear anomaly due to the occurrence of Co$^{\rm 3+}$$/$Co$^{\rm 4+}$ charge ordering (CO) at $T_{\rm S}$$\sim$155 K for 0.6$\leq$$x$$\leq$0.98 (at $T_{\rm S}$$\sim$180$-$190 K for 0.5$\leq$$x$$\leq$0.55). After rapid cool of the specimens, additional anomalies are observed related to the onset of Li diffusion at $T_{\rm F1}$$\sim$370 K and$/$or $T_{\rm F2}$=120$-$130 K. Due to phase mixing with compositions of nearly LiCoO$_2$ and Li$_{\rm 2/3}$CoO$_2$, the specimens with 0.7$\lesssim$$x$$\lesssim$0.9 show anomlies both at $T_{\rm F1}$ and $T_{\rm F2}$. For 0.6$\lesssim$$x$$\lesssim$0.9, the resistivity measured after rapid cool is found to be fairly larger than that measured after slow cool below $T_{\rm S}$. The enhanced resistivity can be explained by the scenario that disordered Co$^{\rm 3+}$$/$Co$^{\rm 4+}$ arrangements, which have been observed and revealed to have an insulating electronic structure contrasting to the regular CO state in the previous scanning tunneling microscopy measurements [Phys. Rev. Lett. {\bf 111}, 126104 (2013)], are realized due to the formation of an amorphous-like structure of Li ions after rapid cool via the interlayer Coulomb coupling. An electronic phase diagram for 0.5$\leq$$x$$\leq$1.0 is proposed.

Strongly Correlated Electrons
Correlating the dispersion of Li@Mn6 superstructure units with the oxygen activation in Li-rich layered cathode

Yiwei Li,Shenyang Xu,Wenguang Zhao,Zhefeng Chen,Zhaoxi Chen,Shunning Li,Jiangtao Hu,Bo Cao,Jianyuan Li,Shisheng Zheng,Ziwei Chen,Taolue Zhang,Mingjian Zhang,Feng Pan

DOI: https://doi.org/10.1016/j.ensm.2021.12.003

IF: 20.4

2022-03-01

Energy Storage Materials

Abstract:The oxygen activation, contributing to the high capacity (> 250 mA h g−1) of Li-rich transition metal (TM) layered oxides xLi2MnO3•yLiTMO2 (TM = Mn, Ni, Co, Fe, etc.), is rooted in the unique 180o Li-O-Li configuration due to the ordering arrangement of Li@Mn6 superstructure units in Li2MnO3 component (equivalent to Li[Li1/3Mn2/3]O2), but the relationship between the oxygen activation and the distribution of Li@Mn6 superstructure units has not established. Herein, we comprehensively investigated the dispersion behavior of Li@Mn6 superstructure units during the synthesis of a model compound Li[Li1/6Mn1/3Ni1/3Sb1/6]O2 (0.5 Li[Li2/3Mn1/3]O2•0.5 Li[Ni2/3Sb1/3]O2) combining ex-situ X-ray diffraction (XRD) and in-situ/ex-situ transmission electron microscope (TEM). It revealed the entire process from the formation of Li@Mn6 superstructure units, to the gradual fusion with Sb@Ni6 superstructure units, eventually to the complete dispersion at 1100 °C. The systemic electrochemical tests demonstrated that, the dispersion of Li@Mn6 superstructure units effectively suppressed the irreversible oxygen activation, and the best capacity and voltage retentions were obtained in the solid solution with the complete dispersion of Li@Mn6 superstructure units. This work benefits the design of high performance Li-rich layered oxides with the modest anionic redox activity through the local structural tuning.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Electronic Structure and Properties of Li_2MnO_3·LiMO_2(M=Co,Ni) by Density Functional Theory

Liangfei Xu

2013-01-01

Abstract:A systematic first principles calculation based on density functional theory is carried out to discuss the structures and properties of LiMO2(M=Co,Ni)and Li2 MnO3,the lithium removal process of Li2 MnO3 is studied from an energetic point of view.In LiMO2(M=Co,Ni)and Li2 MnO3 crystal structures,lithium exists in the Li+form,and transition metals(Co,Ni,Mn)are covalently bound to O. Because of spin polarization,the energy band gap of LiNiO2system is much smaller than that of LiCoO2 and thus LiNiO2 is supposed to show batter conductivity performance.In the process of Li+removal from Li2 MnO3,it happens in the lithium layer at the beginning of charging process,and further removal is likely to take place at the Mn2/3Li1/3layer.The electric structure of the LixMnO3indicates that the charge compensation associated with lithium removal is performed mainly by the oxidation of oxygen,with only a small part of Mn oxidation.
Correlating Cation Mixing with Li Kinetics: Electrochemical and Li Diffusion Measurements on Li-Deficient LiNiO 2 and Li-Excess LiNi 0.5 Mn 0.5 O 2

Nutthaphon Phattharasupakun,Marc M. E. Cormier,Erin Lyle,Eniko Zsoldos,Aaron Liu,Chenxi Geng,Yulong Liu,Hongyang Li,Montree Sawangphruk,J. R. Dahn

DOI: https://doi.org/10.1149/1945-7111/ac24ba

IF: 3.9

2021-09-01

Journal of The Electrochemical Society

Abstract:Cation mixing in Li-based layered positive electrode materials has been reported to negatively affect the electrochemical performance and transport properties of intercalated Li. However, no previous reports have systematically correlated the impact of cation mixing (Ni atoms in the Li layer) on the electrochemical properties and Li transport. Herein, a series of Li-deficient LNO (Li 1−x Ni 1+x O 2 ) materials with different amounts of Ni in the Li layers ranging from ca. 1.5%–6.0% was intentionally prepared by varying the Li/Ni ratio during synthesis. An order of magnitude decrease in the Li chemical diffusion coefficient was found between samples with 1.5% and 6% Ni in the Li layer. A similar dependence of the diffusion constant on the amount of Ni in the Li layer was also observed in the Li-excess materials Li 1 + x Ni 0.5 Mn 0.5 1 − x O 2 for x = 0, 0.04, 0.08, 0.12, suggesting that, in general, larger amounts of Ni in the Li layer will lead to worse kinetics. This work quantitatively demonstrates that the amount of Ni in the Li layer needs to be carefully considered for the development of high-energy Ni-containing layered positive electrode materials as it directly affects overall electrochemical performance, phase transitions, and Li diffusion, leading to worse kinetics and seriously hindering rate capability.

electrochemistry,materials science, coatings & films
Ab initio calculations of Na and Ni diffusion in NaNi 1/2 Mn 1/2 O 2 and NaNi 1/3 Mn 1/3 Co 1/3 O 2 for Na -ion batteries

l m jing,jianguo guan,m p wu,y l zhou,h l lou,g q yin,j j shi,zhiguo wang

DOI: https://doi.org/10.1142/S0217984914502029

2014-01-01

Modern Physics Letters B

Abstract:In this paper, sodium and nickel ion dynamics in layered cathode materials of NaNi1/2Mn1/2O2 and NaNi1/3Mn1/3Co1/3O2 for Na-ion battery applications were investigated using first principles based on density functional theory. The diffusion pathways for sodium and nickel migration inside the layered cathode materials were optimized and their energy barriers were calculated based on the nudged elastic band method. The energy barrier of Na diffusion in NaNi1/2Mn1/2O2 and NaNi1/3Mn1/3Co1/3O2 is about 1.0 eV. However, when the Ni is located at the Na layer, i.e. occupying the Na position, the energy barrier for Ni diffusion inside the layered cathode materials is about 0.36 eV, which indicates that Ni will diffuse to the surface of electrode materials, thus will block or slow down the sodium diffusion, limiting the battery performance.

Diffusion of Li<sup>+</sup> in LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub>

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Monitoring the Formation of Nickel-Poor and Nickel-Rich Oxide Cathode Materials for Lithium-Ion Batteries with Synchrotron Radiation

Electrochemical Properties of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> Synthesized by Co-precipitation Method

Evaluation of the Cation Mixing in LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> Compound

Surface Analysis of the Lithium-Rich Cathode Material Li<sub>1.2</sub>Mn<sub>0.54</sub>Co<sub>0.13</sub>Ni<sub>0.13</sub>Na<sub><i>x</i></sub>O<sub>2</sub> by Advanced Electron Microscopy

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

A Deflagration Method to Synthesize LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> Cathode Materials for Li-ion Batteries

Lithium Diffusion & Magnetism in Battery Cathode Material LixNi1/3Co1/3Mn1/3O2

Kinetics Tuning of Li-Ion Diffusion in Layered Li(NixMnyCoz)O2

Valence study of and : The role of charge transfer and charge disproportionation

Intrinsic Role of Cationic Substitution in Tuning Li/Ni Mixing in High-Ni Layered Oxides

Chemical and Structural Evolution During the Synthesis of Layered Li(Ni,Co,Mn)O2 Oxides

Aging of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> as Cathode Material for Li-ion Batteries

Equation of State and Electrical Transport Properties of Mixture of Li1.2Mn0.54Co0.13Ni0.13O2 and LiNi0.87Co0.09Mn0.03Al0.01O2 at High Pressure

A Baseline Kinetic Study of Co-Free Layered Li 1+x (Ni 0.5 Mn 0.5 ) 1−x O 2 Positive Electrode Materials for Lithium-Ion Batteries

Novel electronic states realized by the interplay between Li diffusion and Co$^{\rm 3+}$$/$Co$^{\rm 4+}$ charge ordering in Li$_{\rm x}$CoO$_2$

Correlating the dispersion of Li@Mn6 superstructure units with the oxygen activation in Li-rich layered cathode

Electronic Structure and Properties of Li_2MnO_3·LiMO_2(M=Co,Ni) by Density Functional Theory

Correlating Cation Mixing with Li Kinetics: Electrochemical and Li Diffusion Measurements on Li-Deficient LiNiO 2 and Li-Excess LiNi 0.5 Mn 0.5 O 2

Ab initio calculations of Na and Ni diffusion in NaNi 1/2 Mn 1/2 O 2 and NaNi 1/3 Mn 1/3 Co 1/3 O 2 for Na -ion batteries