Abstract:Ruddlesden–Popper La x Sr2–x MnO4−δ materials are interesting symmetric solid oxide fuel cell electrodes due to their good redox stability, mixed ionic and electronic conducting behavior, and thermal expansion that matches well with common electrolytes. In reducing environmentsas at a solid oxide fuel cell anodethe x = 0.5 member, i.e., La0.5Sr1.5MnO4−δ, has a much higher total conductivity than compounds with a different La/Sr ratio, although all those compositions have the same K2NiF4-type I4/mmm structure. The origin of this conductivity difference is not yet known in the literature. Now, a combination of in situ and ex situ 3D electron diffraction, high-resolution imaging, energy-dispersive X-ray analysis, and electron energy-loss spectroscopy has uncovered clear differences between x = 0.25 and x = 0.5 in the pristine structure, as well as in the transformations upon high-temperature reduction. In La0.5Sr1.5MnO4−δ, Ruddlesden–Popper n = 2 layer defects and an amorphous surface layer are present but not in La0.25Sr1.75MnO4−δ. After annealing at 700 °C in 5% H2/Ar, La0.25Sr1.75MnO4−δ transforms to a tetragonal 2D incommensurately modulated structure with modulation vectors q⃗ 1 = 0.2848(1)·( a⃗ * + b⃗ * ) and q⃗ 2 = 0.2848(1)·( a⃗ * – b⃗ * ), whereas La0.5Sr1.5MnO4−δ only partially transforms to an orthorhombic 1D incommensurately modulated structure, with q⃗ = 0.318(2)·( c⃗ * ). Perovskite domains grow at the crystal edge at 700 °C in 5% H2 or vacuum due to the higher La concentration on the surface compared to the bulk, which leads to a different thermodynamic equilibrium. Since it is known that a lower degree of oxygen vacancy ordering and a higher amount of perovskite blocks enhance oxygen mobility, those differences in defect structure and structural transformation upon reduction might all contribute to the higher conductivity of La0.5Sr1.5MnO4−δ in solid oxide fuel cell anode conditions compared to other La/Sr ratios.

Effects of Sr-site Deficiency on Structure and Electrochemical Performance in Sr 2 MgMoO 6 for Solid-Oxide Fuel Cell

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6-delta for Solid Oxide Fuel Cells

Structural properties and electrical conductivity of perovskite-type oxides in SOFCs

Sr- and Mo-deficiency Sr1.95TiMo1−O6– double perovskites as anodes for solid-oxide fuel cells using H2S-containing syngas

Incommensurate Modulations and Perovskite Growth in La x Sr 2– x MnO 4−δ Affecting Solid Oxide Fuel Cell Conductivity

Effects of high-valence Mo content on microstructure and properties of Ba2Fe2-Mo O6- anode materials for solid oxide fuel cells

The evolution of structure and electrochemical properties of Y-site deficiency Y1-BaCoCuO5+δ cathode for solid oxide fuel cells

Sr- and Mo-deficiency Sr<sub>1.95</sub>TiMo<sub>1-<i>x</i></sub>O<sub>6-</sub> double perovskites as anodes for solid-oxide fuel cells using H<sub>2</sub>S-containing syngas

Properties of nonstoichiometric Pr0.6-xSr0.4MnO3 as the cathodes of SOFCs

Incommensurate Modulations and Perovskite Growth in LaxSr2-xMnO4−δ Affecting Solid Oxide Fuel Cell Conductivity

Synthesis and Characterization of SmSrCo2−xMnxO5+δ (x=0.0, 0.2, 0.4, 0.6, 0.8, 1.0) Cathode Materials for Intermediate-Temperature Solid-Oxide Fuel Cells

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

Effect of A-site Deficiency in BaCe0.8Sm0.2O3-δ on the Electrode Performance for Proton Conducting Solid Oxide Fuel Cells

Nb5+-Doped SrCoO3-δ Perovskites as Potential Cathodes for Solid-Oxide Fuel Cells

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

Oxygen vacancies-rich iron-based perovskite-like electrodes for symmetrical solid oxide fuel cells

Insight into the structure and functional application of the Sr0.95Ce0.05CoO3-δ cathode for solid oxide fuel cells

Electrochemical performance and structural durability of Mg-doped SmBaMn2O5+δ layered perovskite electrode for symmetrical solid oxide fuel cell

Sr2CoMoO6 anode for solid oxide fuel cell running on H2 and CH4 fuels

Sr-deficient medium-entropy Sr1-xCo0.5Fe0.2Ti0.1Ta0.1Nb0.1O3-δ cathodes with high Cr tolerance for solid oxide fuel cells