Abstract:Sr- and Mo-deficiency Sr1.95TiMo1-xO6-delta (STM1-xO; x = 0-0.075) double perovskites are prepared and applied as potential anodes for solid-oxide fuel cells (SOFCs) operated in sulfur-containing syngas. The effect of Sr- and Mo- deficiency on the crystalline nature, electrical and thermal properties and electrochemical performance are investigated. The STM0.925O crystallizes in a single-phase cubic perovskite structure and has excellent thermal and chemical compatibilities with Ce0.9Gd0.1O1.95, Ce0.8Sm0.2O1.9 and La0.9Sr0.1Ga0.8Mg0.2O3-delta electrolytes. The conductivities of STM0.925O in H-2 at 550 degrees C-850 degrees C are higher than 160 S cm(-1). The polarization resistance (R-p) of STM0.925O is recorded as 1.451 Omega cm(2) at 850 degrees C in H-2, which is 51% lower than that in pristine Sr2TiMoO6, and the maximum power density (P-max) at 800 degrees C in H-2 shows 41% increment as compared to Sr2TiMoO6. The electrochemical performance of STM0.925O is further enhanced by impregnation of Pd: the R-p is decreased from 0.73 Omega cm(2) to 0.33 Omega cm(2) for STM0.925O and Pd-impregnated STM0.925O (Pd-STM0.925O) anodes, while the corresponding P-max in H-2 increased from 649 to 1051 mW cm(-2) at 850 degrees C. The Pd-STM0.925O shows high electrochemical property and durability in simulated coal syngas containing sulfur (3% H2O), making it a promising anode for hydrocarbon-fueled SOFCs. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Sr- and Mo-deficiency Sr<sub>1.95</sub>TiMo<sub>1-<i>x</i></sub>O<sub>6-</sub> double perovskites as anodes for solid-oxide fuel cells using H<sub>2</sub>S-containing syngas

Sr- and Mo-deficiency Sr1.95TiMo1−O6– double perovskites as anodes for solid-oxide fuel cells using H2S-containing syngas

Highly carbon– and sulfur–tolerant Sr2TiMoO6−δ double perovskite anode for solid oxide fuel cells

Ti-doped Molybdenum-Based Perovskites As Anodes for Solid Oxide Fuel Cells

Pd-impregnated Sr1.9VMoO6– Double Perovskite As an Efficient and Stable Anode for Solid-Oxide Fuel Cells Operating on Sulfur-Containing Syngas

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

Optimizing Strontium Titanate Anode in Solid Oxide Fuel Cells by Ytterbium Doping

Evaluation of Strontium-Site-deficient Sr2Fe1.4Co0.1Mo0.5O6−δ-based Perovskite Oxides As Intermediate Temperature Solid Oxide Fuel Cell Cathodes

Synthesis and Evaluation of Ca-doped Sr2Fe1.5Mo0.5O6-δ As Symmetrical Electrodes for High Performance Solid Oxide Fuel Cells

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

Sr2CoMoO6 anode for solid oxide fuel cell running on H2 and CH4 fuels

Novel SrTixCo1−xO3−δ Cathodes for Low-Temperature Solid Oxide Fuel Cells

Pr-Doped SrTi0.5Mn0.5O3-δ as an Electrode Material for a Quasi-Symmetrical Solid Oxide Fuel Cell Using Methane and Propane Fuel

SrCo0.8Ti0.1Ta0.1O3-δ Perovskite: A New Highly Active and Durable Cathode Material for Intermediate-Temperature Solid Oxide Fuel Cells

Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6-delta for Solid Oxide Fuel Cells

Sr2Fe1.5Mo0.5O6 As Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells with La0.8Sr0.2Ga0.87Mg0.13O3 Electrolyte

Optimization of strontium molybdate based composite anode for solid oxide fuel cells

Effects of High-Valence Mo Content on Microstructure and Properties of Ba2Fe2-xMoxO6-δ Anode Materials for Solid Oxide Fuel Cells

Investigation into structure and property of W and Ti co-doped SrFeO3 perovskite as electrode of symmetrical solid oxide fuel cell

Electrochemical Performance and Anode Reaction Process for Ca Doped Sr2Fe1·5Mo0·5O6-δ As Electrodes for Symmetrical Solid Oxide Fuel Cells

Optimized Solid-State Synthesis of Sr2Fe1.5Mo0.5O6−δ Perovskite: Implications for Efficient Synthesis of Mo-Containing SOFC Electrodes