Abstract:Concrete structure is usually affected by sulfate and magnesium salt in soil water environmental. In order to explore anti-erosion properties of cement concrete and high-performance concrete mixed with slag powder after immersed in solution with sulfate and magnesium salt, the study designed three water-binder ratio treatments and two slag powder content treatments. After mixing with water, 1050 specimens (10 mm×10 mm×60 mm) were prepared and incubated in conditions of 20℃ and moisture≥9.5% for 28 d. Then, they were immersed in five different solutions with different sulfate and magnesium concentrations for determine anti-erosion coefficient and microstructure of the specimens during erosion. The results showed that: The cement had many pores with large pore size when water-binder ratio was 0.50, and the maximum diameter of pore reached 372.5μm. The improvement of the pore structure was not obvious when the water-binder ratio decreased to 0.35. When the pure cement concrete specimens was immersed in solution with 2500 mg/L SO42- and 1400 mg/L magnesium2+ for 4 months. The pores of specimens were full of hydration products such as CaSO4·2H2O, 3CaO·Al2O3·3CaSO4·32H2O (AFt), and a small amount of Mg(OH)2 and MgO?SiO2?H2O, which could lead to cracks in concrete, peeling off the side parts, even being crisp and surface slurry loss seriously. After 2 months, the erosion coefficient showed a downward trend with erosion duration and was below 0.85, indicating a limited anti-erosion capacity of silicon concrete. When the concrete was added with slag powder, the pore numbers became small and pore size was small. The largest pore size of concrete with water-binder ratio of 0.35 and 0.30 was only 1/7 and 1/8 times as that of concrete with water-binder ratio of 0.50. Meanwhile, the content of Ca(OH)2 was reduced. The concrete structure became loose, which was more obvious for specimens with low water-binder ratio. After 12 months of erosion in solution of sulfate and magnesium salt (20250mg/L SO42-and 2800mg/L Mg2+), the edge of specimen did not have erosion products and crystals of MgSO4·7H2O, Na2SO4·10H2O, Mg2(OH)3Cl·4H2O, and the corrosion resistance coefficient was still more than 0.85. It suggested that slag powder can significantly improve the anti-erosion properties of high performance concrete formulated by 32.5 silicate cement. Therefore, when cements were used for environment with solutions including 13000 mg/L SO42- and 1400 mg/L Mg2+, or 20250 mg/L SO42- and 2800 mg/L Mg2+, the water-binder ratio of concrete should not be greater than 0.35 and 0.30, respectively, while slag powder content was appropriate from 40% to 45%.The study could provide data support and theoretical basis for concrete preparation and application in irrigation engineering (dam foundation, gates infrastructure and channels etc.) and greenhouse concrete foundation engineering.

The Effect of Mg2+on the Solidification of Chloride Ions in Portland Cement Paste

Understanding the impact of main seawater ions and leaching on the chloride transport in alkali-activated slag and Portland cement

Strength and Leaching Characteristics of Magnesium Phosphate Cement-Solidified Zinc- Contaminated Soil under the Effect of Acid Rain

Effect of Ion Corrosion on 517 Phase Stability

The Stability of Bound Chlorides in Cement Paste with Sulfate Attack

Study on Concrete Deterioration and Chloride Ion Diffusion Mechanism by Different Aqueous NaCl-MgSO4 Concentrations

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

Chloride Binding in Cement Paste with Calcined Mg-Al-CO3 LDH (CLDH) under Different Conditions

Study on the Binding Behavior of Chloride Ion and Ettringite in Nano-Metakaolin Cement by Seawater Mixing and Curing Temperatures

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars

Microstructure characteristics of concrete after erosion of magnesium salts and sulfates

Degradation characteristics of Portland cement mortar incorporating supplementary cementitious materials under multi-ions attacks and drying-wetting cycles

Chloride Binding Behavior and Pore Structure Characteristics of Low-Calcium High-Strength Cement Pastes

Impact of Leaching and Chlorides on Sulfate Attack for Cement Paste

Insights on the chloride adsorption stability in cement mortar under current field and sulfate attack: From experiments to molecular dynamics simulation

Effect of Metakaolin on the Diffusion Properties of Chloride Ions in Cement Mortar under the Coupling Effect of Multiple Factors in Marine Environment

Chloride erosion resistance of calcium formate incorporated cement mortar under chloride attack

Effects of chloride content on early hydration performance of cement pastes