Abstract:While Portland cement produces large amounts of carbon dioxide, low-calcium high-strength cements effectively reduce carbon emissions by decreasing the proportion of high-calcium minerals. In order to enhance the practical application value of low-calcium high-strength cement, the effects of mineral admixtures on the chloride binding capacity and pore structure characteristics of low-calcium high-strength cement pastes were investigated by equilibrium method and mercury intrusion method. The results showed that the chloride binding capacity of low-calcium high-strength cement pastes is superior to that of Portland cement. Fly ash and slag enhance this capacity by promoting monosulfoaluminate and C-S-H gel formation, with fly ash being more effective. Ground limestone also boosts chloride binding when incorporated at less than 10 wt%. However, sulfates have a more significant negative impact on chloride binding capacity in low-calcium high-strength cement pastes compared to Portland cement. The porosity of low-calcium high-strength cement pastes exhibits contrasting trends with the addition of fly ash, ground limestone, and slag. Fly ash and limestone initially coarsen the pore structure but later facilitate the transition of larger pores to smaller ones. In contrast, slag initially has little impact but later promotes the conversion of large capillary pores to medium ones, optimizing the pore structure. Notably, above 10 wt% fly ash, the critical pore diameter decreases with additional fly ash except at 10% where it increases for 3 days. Ground limestone enlarges the critical pore diameter, and this effect intensifies with higher content. During early hydration, slag decreases the critical pore diameter, but its impact diminishes in later stages.

Chloride Binding in Cement Paste with Calcined Mg-Al-CO3 LDH (CLDH) under Different Conditions

Chloride binding capacity of LDHs with various divalent cations and divalent to trivalent cation ratios in different solutions

Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process

Influence of Calcined Hydrotalcite on Chloride Penetration in Mortar

Impacts of Mg/Al-layered double hydroxide modified with polycarboxylate on the properties of cement paste

Chloride Binding Behavior and Pore Structure Characteristics of Low-Calcium High-Strength Cement Pastes

Chloride Resistance and Binding Capacity of Cementitious Materials Containing High Volumes of Fly Ash and Slag

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Chloride binding behavior of synthesized reaction products in alkali-activated slag

Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars

Improving sulfate attack resistance of concrete by using calcined Mg-Al-CO3 LDHs: Adsorption behavior and mechanism

Synthesis of CaLiAl-LDHs and its optimization on the properties and chloride binding capacity of eco-friendly marine cement-based repair materials

Chloride binding behaviors and early age hydration of tricalcium aluminate in chloride-containing solutions

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

Performance of Limestone Calcined Clay Cement (LC3) with various kaolinite contents with respect to chloride transport

Chloride Binding Capacity and Its Effect on the Microstructure of Mortar Made with Marine Sand

Study on the Binding Behavior of Chloride Ion and Ettringite in Nano-Metakaolin Cement by Seawater Mixing and Curing Temperatures

Effects of Layered Double Hydroxide Nanosheets with Different Cations on the Compressive Strength of Cement Composites

Effects of chloride content on early hydration performance of cement pastes

Chloride binding to calcium silicate hydrates (C-S-H) in cement paste: a molecular dynamics analysis

Effect of layered double hydroxides on the calcium leaching of cement pastes