Abstract:Purpose The purpose of this paper is to analyse the thermal environment of two engineering testing centres cooled via different means using computational fluid dynamics (CFD), focussing on the indoor temperature and air movement. This computational technique has been used in the analysis of thermal environment in buildings where the profiles of thermal comfort parameters, such as air temperature and velocity, are studied. Design/methodology/approach A pilot survey was conducted at two engineering testing centres – a passively cooled workshop and an air-conditioned laboratory. Electronic sensors were used in addition to building design documentation to collect the required information for the CFD model–based prediction of air temperature and velocity distribution patterns for the laboratory and workshop. In the models, both laboratory and workshop were presumed to be fully occupied. The predictions were then compared to empirical data that were obtained from field measurements. Operative temperature and predicted mean vote (PMV)–predicted percentage dissatisfied (PPD) indices were calculated in each case in order to predict thermal comfort levels. Findings The simulated results indicated that the mean air temperatures of 21.5°C and 32.4°C in the laboratory and workshop, respectively, were in excess of the recommended thermal comfort ranges specified in MS1525, a local energy efficiency guideline for non-residential buildings. However, air velocities above 0.3 m/s were predicted in the two testing facilities, which would be acceptable to most occupants. Based on the calculated PMV derived from the CFD predictions, the thermal sensation of users of the air-conditioned laboratory was predicted as −1.7 where a “slightly cool” thermal experience would prevail, but machinery operators in the workshop would find their thermal environment too warm with an overall sensation score of 2.4. A comparison of the simulated and empirical results showed that the air temperatures were in good agreement with a percentage of difference below 2%. However, the level of correlation was not replicated for the air velocity results, owing to uncertainties in the selected boundary conditions, which was due to limitations in the measuring instrumentation used. Research limitations/implications Due to the varying designs, the simulated results of this study are only applicable to laboratory and workshop facilities located in the tropics. Practical implications The results of this study will enable building services and air-conditioning engineers, especially those who are in charge of the air-conditioning and mechanical ventilation (ACMV) system design and maintenance to have a better understanding of the thermal environment and comfort conditions in the testing facilities, leading to a more effective technical and managerial planning for an optimised thermal comfort management. The method of this work can be extended to the development of CFD models for other testing facilities in educational institutions. Social implications The findings of this work are particularly useful for both industry and academia as the indoor environment of real engineering testing facilities were simulated and analysed. Students and staff in the higher educational institutions would benefit from the improved thermal comfort conditions in these facilities. Originality/value For the time being, CFD studies have been carried out to evaluate thermal comfort conditions in various building spaces. However, the information of thermal comfort in the engineering testing centres, of particular those in the hot–humid region are scantily available. The outcomes of this simulation work showed the usefulness of CFD in assisting the management of such facilities not only in the design of efficient ACMV systems but also in enhancing indoor thermal comfort.

Thermal Performance of Naturally Ventilated Classroom in the Faculty of Engineering Hasanuddin University, Gowa Campus

Thermal Comfort in a Tropical Climate: Case Study of the Cafeteria in Student Residential College, UTHM Pagoh Branch Campus

Sustainable ventilation strategies in buildings: CFD research

Improving the ventilation of a classroom to achieve heating energy savings and better indoor air quality

Towards Enhancing the Effectiveness of Classroom Designs for Natural Ventilation Comfort in Yola, Nigeria

The Investigation of Indoor Air Temperature Effects for Different Types of Window Dimensions Using CFD Simulation

Analyzing the effects of passive design strategies on building ventilation performance and thermal comfort using simulation-based approach

Thermal Comfort Analysis Study At The Faculty Of Sports Science, Cenderawasih University, Jayapura-Papua

Simulation study for natural ventilation retrofitting techniques in educational classrooms - A case study

CFD modeling of natural ventilation in a void connected to the living units of multi-storey housing for thermal comfort

Field measurement and numerical investigation of natural cross-ventilation in high-rise buildings; Thermal comfort analysis

Numerical Study on Natural Ventilation of Classroom in Chaobei Area of China

Performance Optimization of Natural Ventilation in Classrooms to Minimize the Probability of Viral Infection and Reduce Draught Risk

Examination and Optimization of Classroom Indoor Environments in China’s Hot Summer and Cold Winter Regions

Research on the Impact of Air Temperature and Wind Speed on Ventilation in University Dormitories under Different Wind Directions (Northeast China)

STRATEGY OF GREEN DESIGN IMPLEMENTATION FOR OPTIMIZING OF THE NATURAL VENTILATION AT HIGH-RISE BUILDING

Ventilation Characteristics and Performance Evaluation of Different Window-Opening Forms in a Typical Office Room

Post Occupancy Evaluation of Ventilation Coefficient Desired for Thermal Comfort in Educational Facilities

Thermal comfort prediction of air-conditioned and passively cooled engineering testing centres in a higher educational institution using CFD

Numerical and experimental investigations of the impacts of window parameters on indoor natural ventilation in a residential building

Windows design for maximum cross-ventilation in buildings