Abstract:A negative stiffness device (NSD) utilizing pre-compressed helical springs has been integrated with diverse vibration control techniques. Recently, the incorporation of NSD has been proposed to enhance the efficacy of a tuned mass damper (TMD) controlled system. This study introduces two design strategies for the NSD–TMD system, which functions either as a TMD with an adjustable operating bandwidth or as a pure non-linear energy sink. First, the non-linear force of NSD was expressed in a Taylor series approximation form incorporating a negative linear stiffness and a positive cubic stiffness term. Second, the equations of motion were formulated, and closed-form solutions were derived using the complexification–averaging method. The accuracy of the Taylor series approximation was substantiated within a specified range through a comparison of force–displacement curves. Third, the accuracy of the dynamic closed-form solutions was affirmed by comparing the amplitude–frequency curves with the numerical simulations. For a case study, an actual timber pedestrian bridge with decaying natural frequency was selected, and the two design strategies were examined individually. The vibration control performance of the TMD and NSD–TMD was also comparatively analyzed. The assessment focused on the peak force transmissibility value and the effective operating frequency bandwidth. Results highlighted a notable enhancement in operational performance, particularly for primary structures exhibiting diminishing modal frequencies. In a TMD-controlled system, the efficacy of vibration control deteriorates and may even amplify the dynamic response when a modal frequency shift occurs in the primary structure. Conversely, both design strategies of NSD–TMD can achieve lower transmissibility and broaden the operating bandwidth.

OPTIMUM DESIGN OF TUNED MASS DAMPER FOR FOOTBRIDGE

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Exact Solutions for a Novel H<sub>2</sub> Optimal Design of Electromagnetic Tuned Mass Damper

Crowd-induced random vibration of footbridge and vibration control using multiple tuned mass dampers

Crowds-induced vibration control of beam footbridge equipped with multiple tuned mass dampers

Simplified model of human crowd and parameter design of TMD for footbridges

Study on optimization algorithm of tuned mass damper parameters to reduce vehicle-bridge coupled vibration

Random crowd-induced vibration in footbridge and adaptive control using semi-active TMD including crowd-structure interaction

Optimized Design of a Tuned Mass Damper Inerter (TMDI) Applied to Circular Section Members of Transmission Towers

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Use of semi-active tuned mass dampers to control footbridges subjected to synchronous lateral excitation

Optimal Design Formula for Tuned Mass Damper Based on an Analytical Solution of Interaction between Soil and Structure with Rigid Foundation Subjected to Plane SH-Waves

Design of a Semiactive TMD for Lightweight Pedestrian Structures Considering Human–Structure–Actuator Interaction

Robust damping improvement against the vortex-induced vibration in flexible bridges using multiple tuned mass damper inerters

Exploring Semi-Active TMD Performance on Lively Footbridges Considering Human–Structure Interaction in Vertical Direction

Reduction of vibration during construction of bridge towers by tmd

Comprehensive design strategy of the NSD–TMD controlled system with closed-form frequency-amplitude solutions

Active-learning Kriging-assisted robust design optimization of tuned mass dampers: Vibration mitigation of a steel-arch footbridge

Tuned Mass Dampers for Wind-Induced Vibration Control of Chongqi Bridge

Analytical design of non-grounded tuned mass-damper-inerter for base-excited structures

Simulation Study on Train-Induced Vibration Control of a Long-Span Steel Truss Girder Bridge by Tuned Mass Dampers